Temporary arrangement for Independence Day Celebration at Netaji Stadium, Port Blair during 2022-23. Sub-Work - Temporary arrangement for Independence Day Celebration at Netaji Stadium, Port Blair including Painting

Amount

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (Labour rate) (Required paint will be supplied by departmently rest of all ,shall be arranged by the contractor ).

One or more coats on old work

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification.(Labour rate) (Required paint will be supplied by departmently rest of all ,shall be arranged by the contractor ).

One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade :(Labour rate) (Required paint will be supplied by departmently rest of all ,shall be arranged by the contractor ).

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Materials to be taken back by the contractor by dismantling/removing the same after the function)

Supplying and stacking at site as per direction of ENgineer-In-Charge.

River Sand

Pulvarized sand

Stone agreegate 12.50 mm to 20 mm

Providing and fixingUPVC (SWR) soil, waste and vent pipe (6 kg/Sqm)

110 mm dia

Provding and fixing UPVC Plain bend of required degree.

110 mm dia

Varnishing with varnish of approved brand and manufacture:

One or more coats with copal varnish

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.(Labour rate) (Required paint will be supplied by departmently rest of all ,shall be arranged by the contractor ).

Two or more coats on new work

Providing and fixing white polyster cloth on LG Dias including stiching all complete as per the direction of ENgineer-In-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing in position facia and eaves boards with 12 mm thick plywood IS 303 of approved qaulity 60 cm wide.(Materials to be taken back by the contractor by dismantling the same).

Providing and fixing Plywood of different size and different thickness wherever required screeing all complete.(Materials to be taken back by the contractor by dismantling the same).

With 19 mm thick Plywood IS :303

With 6 mm thick Plywood IS :303

Providing aluminum plain sheet gutter of 60 cm wide.(Materials to be taken back by the contractor by dismantling)

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :(Materials to be taken back by the contractor by dismantling/removing the same after the function).

Superior hard wood Cat-II B

Providing and fixing wood work (Cat-II B) in posts frames and trenching for making stage dias welcome gate etc.(Materials to be taken back by the contractor by dismantling the smae after the function)

Spreading of pulavarized sand/river sand at required thickness over the top of parrade track.

Providing and fixing flag (2 mtrx1 Mtr) on G.I pipe(1inch) including excavating holes,G.I.pipe of 6.00 mtr ,stiching charges etc.complete as per direction of Engineer-In-charge.

Providing and fixing door mat of size 90"x60" of approved qaulity.

Carriage of materials by mechanical means within a lead of 1.00KM including loading and unloading .(1 trip of approximate 5.00 cum)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work

20 mm nominal dia Pipes

Supplying of light tuff durable tarpoline of approved qaulity.

Size 18x 12 Ft

Size24x18 Ft

Size 18x15 Ft

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

G.I. pipes

Providing and fixing aluminium sheet roofing accessaries 0.50 mm thick .

Gutter (600 mm over all girth).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level :

1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Bend 87.5° 110 mm bend

AMAL MANDAL