REPAIRS TO JOINERY, PERIODICAL SERVICES, FLOORING, PENT ROOF AND CERTAIN B/R REPAIRS AT INS UTKROSH UNDER AGE B/R II AT GE MINNIEBAY, PORT BLAIR

Amount

Taking down existing chowkats or frames n.exc. 1.5 Sqm each without taking off shutters from the frames including holdfast complete all as specified and as directed.

Taking down existing chowkats exc. 1.5 Sqm and n.exc 4 Sqm each without taking off shutter from the frame including holdfast complete all as specified and as directed.

Resecuring or easing and refixing of wooden shutters of any description exc 2 sqm in the same opening complete as all specified and as directed

S&F Plain, solid, straight chowkats and frames of second class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed..

S&F 30mm thick factory made flush shutters of second class hard wood, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35mm thick factory made glazed and skeleton shutters of second class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.complete all as specified and as directed.

M& L for Plain Cement Concrete type 1:3:6 C -1 Nominal mix using 20mm graded stone aggregate as in filling under hold fast including necessary form work complete all as specified and as directed.

M& L for treating with tar or coal tar black paint on back of chowkats, area tarred exec 0.1 Sqm but not exceeding 0.5 Sqm each treated with tar or coal for black paint complete all as specified and as directed.

M& L for treating small articles such as stop, covers, gully grating, hold fasts, and of posts , back of chowkats, etc area not exc 0.1 Sqm each treated with tar or coal tar black paint complete all as specified and as directed.

S&F bands, straps , supports or stays for rain water, ventilating pipes including bolts, clamps, hold fasts etc and similar small articles to Fe-410-0 or Fe-310- 0 complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm plain colour PVC Sheet on back face, fixing in frame complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing complete all as specified and as directed.

M&L for preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S & F 75 mm size, medium weight butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 100 mm long complete all as specified and as directed.

S & F in Aluminium anodised barrel tower bolt of size 150 mm size of extruded section complete all as specified and as directed.

S&F 300mm aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F repair Aluminium anodised barrel tower bolt of size 100 mm size of extruded section complete all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and as directed.

S&F repair extruded aluminium alloy handle fabricated type anodised 100 mm long complete all as specified and as directed.

S&F repair extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and as directed.

S & F repair 100 mm size, medium weight butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed.

S&F repairs aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S& F in repairs aluminium (extracted section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and complete all as specified and as directed.

Hacking out old broken glass [any thickness, size, quality or description] from wooden / Aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S & F in repair 4.80mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

S&F in repairs Anodised Aluminium frames for Partition, Door, Windows and Ventilators with one or more rebates including jointing cleat for fixing etc & fixed with glass or gauge, side hung type without sash bars using standard aluminium section including necessary Aluminium grill (Decogrill), jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified incl aluminium grills fixed to window frame aluminium anodised wire cloth fixed to aluminium frame all as specified and directed NOTE: (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles and fixing of SS friction stay hinges, 5mm thick glass,wire cloth etc. (ii) Supply only 4mm thick sheet glass and aluminium wire cloth & SS friction stay hinges shall be measured and paid separately. (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose .

Supply only 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

Supply & fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

Supply only stainless steel friction stay hinges of standard size complete all as specified and as directed.

S&F in repairs Stainless steel friction stay hinges 200x19x1.90mm of standard size complete all as specified and as directed.

S & F in repairs 125 mm long aluminium anodised handle of extruded section fabricated type complete all as specified and as directed

S&F in repairs 100mm long aluminum handles for window aluminum etruded aluminum alloy anodised fixed to window in position left or right complete all as specified and as directed .

S&F in repair 30mm continuous (Piano) hinges, mild steel bright finished or electro galvanised with flap complete all as specified and as directed.

S & F in repair hasp and staple for 75 mm of aluminium anodised all as specified and as directed

M&L in replacement of old damaged anodised aluminium sections in sliding windows including hold fast/ screw drilled, punching, anchorage rod, aluminium cleats, making good the disturbed area with existing finishing so as to match with the under mentioned sections:- (a) Frame guide of window 92 x 29 x 1.2mm (b) Shutter top and bottom 50 x 20 x 1.5 mm (c) Shutter inter lock section 50 x 20 x 1.5 mm (d) 5 mm thick tinted glass with aluminium glazing clips rubber beads (e) Handle section 39.40 x 17.70 x 1.5 mm (f) Aluminium deco grills, fixed with 'F' channel DG-104 pattern 5.50 mm thick (g) Aluminum XPM wiremesh Note : If exact section is not available in market then next immidiate higher section shall be used without any price adjustment.

S&F in repairs using plywood (Marine proof), grade BWP, type BB 12mm thick 7 No of ply fixed with nails to timber frames as in pelmet boxes and similar works etc complete all as specified and as directed

S&F in repair 18/19 mm thick pre-laminated particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter, shelves, partitions and similar items including dismantling and all necesary fittings complete all as specified and as directed.

S & F in repairs stainless steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and as directed.

M&L in repairs decorative laminate 0.9mm thickness type 1,of surface finish,colour and pattern fixed with adhesive as per manufactures instructions complete all as specified and as directed.

S&F in repairs 20mm dia aluminium tubular rail as in curtain rods fixed in cup boards and pelmets complete all as specified and as directed.

S&F in repairs brackets for fixing of curtain rods complete all as specified and as directed.

S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and as directed

Cutting holes in brick walls, one brick thick wall in cement mortar for inserting hold fast and making good dismantles portion in CM 1:3 or PCC (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and as directed.

Minor repair to aluminum joinery and making serviceable the same by meance of adjustment, greacing as necessary etc all as specified and directed

M&L for 40 mm thick padding in roof, chajjas and similar work in PCC 1:2:4 type B0 using 12.5mm graded stone aggregate with WPC @ 3% by wt , making required slope & filling mastic filling in joints of wall and chajja and surface even and smooth with using extra cement including demolition all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S&F Mild steel framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290, Gde E-165 complete all as specified and as directed

S&F in repair drawer handles, projecting drop (50 mm to 65mm) on screwed plate complete all as specified and as directed

S&F in repair drawer brass handles projetcting drop (50 mm to 65mm) on screwed plate complete all as specified and as directed

S&F in repair cast iron mild steel drawer pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long complete all as specified and as directed

S&F in repairs Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed complete all as specified and as directed

S&F in repairs locks drawer, grade I, size 50mm complete all as specified and as directed

Demolition of cement concrete (unreinforced) incl tiles and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for plain cement concrete nominal mix 1:4:8 type D 2, 75mm thick (using 40mm graded stone aggregate) as in flooring finished even and fair without using extra cement complete all as specified and as directed

M&L for plain cement concrete nominal mix 1:2:4 type B-1, 40mm thick (using 20mm graded stone aggregate) as in flooring finished even and fair without using extra cement complete all as specified and as directed

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M & L for vitrified ceramic tiles 10mm thick rectangular polished heavy duty vertified tiles 300x300 size laid in floors etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for non skid ceramic tiles coloured of size 400x400x7-8mm thick laid in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed in CM 1:3 complete all as specified and as directed

M&L for glazed ceramic tiles in vertical surface 300X200X7-8 mm thick as dadoes, skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 10mm thick screed bed in CM 1:3 complete all as specified and as directed

M&L for chequred cement concrete tiles mixed with grey cement and no pigment of size 300x 300 x25 mm thick set jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed in CM 1:4 complete all as specified and as directed

M&L for vitrified coloured tiles(light shade)10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in cement slurry and pointed in white or coloured cement to match over a screed bed or bedding layer with CM 1:6, 15mm thick for laying floor finishes all as specified.

M&L for non skid ceramic tiles each tile (square/rectangle) exc 0.06 Sqm but not exceeding 0.11 Sqm , thickness 7 -8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer with CM 1:6 for laying floor finishes all as complete all as specified and as directed.

Taking down cement plaster on brick or stone wall and racking out joints hacking for key sucrubing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering to ceiling in 5mm thick on fair faces of concrete surface in CM (1:3) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distempering over a coat of alkali resistant primer complete all as specified and directed

All as per Item No 71.00 above but on ceiling complete all as specified and as directed

M& L for preparation of newly plastered surfaces and applying two coats of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer and a coat of external wall putty complete all as specified and as directed

M & L for preparation of old distempered surfaces of ceiling and applying one coat of oil bound distemper all as specified and directed.

M & L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper all as specified and directed.

M & L for preparation of old wooden surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint all as specified and directed.

M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint all as specified and directed.

M & L for complete removal of existing treatment and appying of two coats of wall putty including two coats of oil bound distemper over a coat of primer all as specified and directed.

M & L for preparation of old surfaces of wall and applying one coat of acrylic emulsion based premium quality finish exterior antifungal paint complete all as specified and as directed

M&L for preparing new / old wall in side shaft surfaces for cleaning the fungi / algae growth by washing / scrubbing etc, including making arrangements for scaffolding and making good any damage / weak surfaces to match the existing surfaces and applying two coats of water proof elastomeric coating all as per manufacturer's instructions and all as directed. Note : Cost of plastering exceeding 0.5 Sqm shall be measured and paid separately under relevent item of this schedule

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed

S&F aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

S&F in repairs towel holder ring type CP Brass complete all as specified and as directed

Taking up or down old/chocked water tubing 15mm bore with fittings from trenches / walls complete all as as specified and as directed.

Taking up or down old/chocked water tubing 20mm bore with fittings from trenches / walls complete all as as specified and as directed.

Taking up or down old/chocked water tubing 25mm / 32mm mm bore with fittings from trenches / walls complete all as as specified and as directed.

S&F 16mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floor complete all as specified and as directed

S&F 20mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floor complete all as specified and as directed.

S&F 25mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floor complete all as specified and as directed.

S&F 32mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floor complete all as specified and as directed.

S&F 16mm outer dia CPVC pipe brass elbow complete all as specified and as directed

S&F 16mm outer dia brass tee complete all as specified and as directed

S & F 16 mm male brass threaded adaptor (MTA / MBTA ) complete all as specified and as directed

S & F 16 mm female brass threaded adaptor (FTA/ FBTA) complete all as specified and as directed

S & F 16 mm outet dia CPVC union complete all as specified and as directed

S & F 16 mm Brass CPVC Tank Adaptor complete all as specified and as directed

S&F 20 mm outer dia CPVC brass elbow complete all as specified and as directed

S&F 20 mm outer dia CPVC brass elbow (3/4 X 1/2) complete all as specified and as directed

S&F 20 mm outer dia brass Tee complete all as specified and as directed

S & F 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed

S & F 20 mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and as directed

S & F 20 mm outer dia CPVC union complete all as specified and as directed

S & F 20 mm Brass CPVC Tank Adaptor complete all as specified and as directed

S & F 25 mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed

S & F 25 mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and as directed

S & F 25 mm outer dia Couter dia brass tee complete all as specified and as directed

S & F 25 mm outer dia CPVC union complete all as specified and as directed

S & F 25 mm Brass CPVC Tank Adaptor complete all as specified and as directed

S & F 25 mm outer dia CPVC pipe brass elbow complete all as specified and as directed

S & F 32 mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed

S & F 32 mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and as directed

S & F 32 mm outer dia CPVC union complete all as specified and as directed

S & F 32 mm Brass CPVC Tank Adaptor complete all as specified and as directed

S & F 32 mm outer dia brass tee complete all as specified and as directed

S & F 32 mm outer dia CPVC pipe brass elbow complete all as specified and as directed

S&F in repairs 32mm waste coupling, brass, chromium plated for glazed ware sinks and basins etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in couplig complete all as specified and as directed

S&F in repairs 40mm wastecoupling, brass, chromium plated for glazed ware sinks and basins etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in couplig complete all as specified and as directed

S & F in repair bib taps, cast copper alloy, 15 mm dia, Chromium Plated with crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin, white, flat back of size 550 mm X 400 mm excluding pillar tap, and waste fittings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, complete all as specified and as directed.

S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs Ball Brass Valve, 25 mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs Ball Brass Valve, 20 mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe, cast copper alloy with crutch or butterfly handle screwed down or brass ferrule complete all as specified and as directed.

S&F in repairs Angular Cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed.

S&F in repairs stop valves cast copper alloy chromium plated fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed .

S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed .

S & F in repairs Vitreous China white Squatting Pan IWC pattern, long Pan of Size 580 mm 'P' or 'S' trap, front or back inlet and foot rests ( excluding cistern and flush pipe) including Provision of concrete bedding in 1:5:10 and making good to floor all as specified and as directed.

S&F in repairs PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supply line and water closet pan complete all as specified and as directed.

Fixing only in repairs by replacing minor parts like flushing knob, float, screws etc of PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supply line and water closet pan complete all as specified and as directed.

S&F in repairs gun metal gate valves with iron wheel head screwed both ends for iron pipe of dia 20mm complete all as specified and as directed.

S&F in repairs gun metal gate valves with iron wheel head screwed both ends for iron pipe of dia 25mm complete all as specified and as directed.

S&F in repairs PVC flexible connections 16mm size of length 450mm with, brass unions and rubber washers on either side for connecting water supply line to WHB, flush tank, etc complete all as specified and as directed

S&F in repairs brass chromium plated shower rose with or without swivel joint 100mm size with shower arm complete all as specified and as directed.

S & F in repairs Vitreous china wash down water closet [Pedestal pattern]EWC, white [excluding flushing cistern and flush pipe] including plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.

S & F in repairs Stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated, and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe, over all size 1140 mm x 500 mm bowl size 510 mm x 400 mm x 190 mm complete all as specified and as directed.

S&F in repairs brass cromium plated telescopic jet spray complete complete all as specified and as directed.

S&F in repairs health faucet length of tube 1.50m fixed icomplete all as specified and as directed

S & F in repairs two way bib tap 15 mm bore cast copper alloy Chromium plated with capstan head, screwed down, screwed for iron pipes complete all as specified and as directed.

S & F in repairs Plastic Water Closet Seat cover, White, Closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F Mild steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc. complete and welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed

M & L for Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,riveted or welded Fe - 290 Gde E-165 complete all as specified and as directed

S&F repairs pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F repairs pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.

S&F in repairs Aluminium wind ties for roof including all necessary drilling, bolting or rivetting fixed with GI self tapping screws as specified for roof sheeting.

Fixing only in repairs bid cock including cleaning, removing of air block /washer etc of any type and size complete all as specified and as directed

Fixing only in repairs pillar taps including cleaning, removing of air block / washer etc of any type and size complete all as specified and as directed

Fixing only in reparis angular cock including cleaning, removing of air block / washer etc of any type and size complete all as specified and as directed

Fixing only in repairs stop cock including cleaning, removing of air block / washer etc of any type and size complete all as specified and as directed.

M/s Shiva Engineering

EXCEL ENGINEERING WORKS

M/s J. M. Enterprises

V CHINNA DURAI

ANDAMAN PAINTS PVT LTD

S S CONSTRUCTION

KHOTEL CONSTRUCTION