Ward No. 23 Construction of Room, Bath room, Boundary Wall, Interlocking Passage, Earth Filling work, Plumbing, electrical work, False ceiling, Floor and Wall Tile work in Shamshan Ghat at Moradabad Chandausi Road.

Site Clearence, Material shifting by Labour including all labour , T&P etc complete. DSR-2023 code No-0114 (Rate=645.0*0.749=483.10/day)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. DSR 2023 code No. 15.7.4 (Rate=2060.20*0.749=1543.09/Cum)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in - charge. DSR 2023 code No.-15.2.2 Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) (Rate=1503.6*0.749=1126.20/Cum)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR code No-15.56 (Rate=54.65*0.749=40.93/Sqm)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. DSR 2023 code No. 15.3 (Rate=3551.25*0.749=2659.89/Cum)

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 2.1.1 All kinds of soil. DSR 2023 Item No-2.1.1 (Rate=129.85*0.749=97.26/Cum)

Providing & Laying P.C.C. 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources. DRS 2023 Item no -(4.1.10) Rate(6518.60*0.749=4882.43/Cum)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources. DRS 2023 Item No -5.1.2 (Rate=9045.75*0.749=6775.25/Cum)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DRS Item No -5.2.2 (Rate=10852.95*0.749=8128.86/Cum)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(Thermo-Mechanically Treated bars of grade Fe-500D or more) .DSR Item No-5.22.6 (Rate=107.10*0.749=80.22/Kg)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR ITEM No-6.1.1( Rate =7370.65*0.749=5520.62/cum)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.DSR Item No-2.25(a)( Rate=700.50*0.749=524.67/cum)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) DSR ITEM No-6.4.1 (Rate =9344.35*0.749=6998.92/Cum)

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR code No-13.4.1 (Rate=357.35*0.749=267.66/Sqm)

40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. DSR code No-11.3.1 (Rate=614.20*0.749=460.04/Sqm)

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece DSR 2023 code No-10.5.2 (Rate=5563.75*0.749=4167.25/Sqm)

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. DSR code No-10.31 (Rate=130.50*0.749=97.74/Kg)

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) DSR code No-10.15.1 (Rate=195.20*0.749=146.20/Kg)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. DSR code No-9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (Rate=3473.85*0.749=2601.91/Sqm)

Providing and fixing 28mm thick door shutters made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joint are made using solvent adhesive.(DSR 2023 code No.-9.124.1) (Rate=3754.20*0.749=2811.90/Sqm)

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary Screws :

Providing & fixing aluminium sliding door bolts ISI marked with nuts and screws etc complete. (a) 250mm x 16mm) . DSR 2023 code No.-9.96.2 (Rate=260.60*0.749=195.19/each)

Providing and fixing aluminium towerbolts (barrel type) with necessary screws etc. complete DSR 2023 code No.-9.97.2 (Rate=115.15*0.749=86.25/each)

Providing and fixing aluminium handles with screws etc. complete (a) 125 mm DSR 2023 code No.-9.100.2 (Rate=59.55*0.749=44.60/each)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. DSR.2023- code No.- 11.41.2 (rate=1553.45*0.749=Rs. 1163.53/Sqm)

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. DSR.2023-code No.- 11.37a (rate=1112.70*0.749=Rs. 833.41/Sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer DSR-2023 code No-13.41.1 (Rate=185.65*0.749=139.05/Sqm)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR code No-13.46.1 (Rate=160.60*0.749=120.30/Sqm)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR code No-13.80 (Rate=156.05*0.749=116.88/Sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work DSR code No-13.62.1 (Rate=226.25*0.749=169.46/Sqm)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sgm mixed with water proofing cement compound @ 0.253 kg/sgqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sgm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. DSR code No-22.6 (Rate=688.90*0.749=515.99/Sqm)

Construction of granular Sub -base by provinding close graded material conforming to specificationS,mix plant at OMC,Carriage of mixed material by tipper to work site,for all leads & Lifts spreading in uniform layers with motor graded on prepared surface and compacting with vibratory power roller to achieve the Desired Density complete as per specification and direction of Engineer -in Charge . with material conforming to Grade -II (size range 26.50mm to 0.075mm having CBR Value-20) DSR No-16.78.3 (Rate =2808.55*0.749=2103.60/cum)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. DSR-2023 code-16.91.2 (Rate=1091.50*0.749=817.53/Sqm)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps DSR-2023 code-17.7.1 (Rate=2648.85*0.749=1983.99/each

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. (DSR-2021 S.I.No. 18.8) 15mm dia outer dia pipes (DSR-2023 code No. 18.8.1) Rate Rs.= 497.8*0.749=372.85/m

20mm dia outer dia pipes (DSR-2023 code No. 18.8.2) Rate Rs.= 537.6*0.749=402.66/m

Providing & fixing brass angle valve of approved quality

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighting not less than 690 gms

Supply & fixing 10 cm internal dia PVC pipe down pipe

Providing & fixing 600x 450 mm bevelled edge mirror of superior glass approved quality with 6mm hard board ground fixed to wooden cleats with CP brass scews and washer complete. (S.I.No. 17.18.1)

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : DSR-2023 I.No.-18.22.2 (25 mm diameter) (Rate=222.35*0.749=166.54/Nos)

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. DSR-2023 I.No.-14.28.2 (25 mm diameter) (Rate=421.75*0.749=315.89/Nos)

Providing & Placing on terrace (at all floor levels) polyethylene water storage tank ISI 12710 maked with cover and suitable locking arrangement and making necessary hole for inlet,outlet and over flow pipe but with out fitting & base support for tnak. DSR-2023 I.No.-18.48 (Rate=11*0.749=8.24/Litre)

Wiring point for light in PVC conduit on surface , complete with 8 SWG GI earth continuity wire , switch and ceiling rose /angle/ battan holder on 3 mm thick phenolic laminated backelite-sheet etc complete in all respect, with 1.5 Sq mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit (As per PWD S.I No 121 (B)

Wiring point for plug in PVC conduit on surface , complete with 8 SWG GI earth continuity wire , switch and ceiling rose /angle/ battan holder on 3 mm thick phenolic laminated backelite-sheet etc complete in all respect with 1.5 Sq mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit (As per PWD S.I No 124(b)

Wiring point for fan/fresh air fan in PVC casing & caping used in place of PVC conduit on surface , complete with 8 SWG GI earth continuity wire , switch and ceiling rose /angle/ battan holder on 3 mm thick phenolic laminated backelite-sheet etc complete in all respect with 1.5 Sq mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit (As per PWD S.I No 123©

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect PWD Elect SOR S.I No-1413,Cat-AA

Supply & Fixing 1200mm dim. long Fan including s/o all materials,labour,T&P etc complete.

Deduction for old masonary bricks

Supply & Fixing inaguration stone/ information board in piar of brick work complete in all respect.

Add GST 18%

Adjustment for Say

Please Enable Macros to View BoQ information