Construction of 4 nos toilet, At-KGBV Gidhour.

Earth work in excavation in foundation trenches in…….do………do……..all complete as per approved design, building specification and direction of E/I.

Providing coarse clean local sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per buiding specification and direction of E/I.

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

Providing P.C.C M-20 in foundation with nominal mix of (1:1.5:3) approved quality of stone metal 50mm to 40mm size graded and local river sand (washed and screened) including screening, shuttering, mixing, cement concrete in mixer and placing in position vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M-20 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position, vibration, striking, curing, (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M-200 band at plinth level with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position, vibration, striking, curing, (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification of direction of E/I.

Providing R.C.C M 200 with nominal mix (1.1.5.3) In columns with approwed quality of stone chips 20mm, 26mm size graded and clean coarse sand of f.m.2.5 to 3 including screening shuttering, mixing, cement, concrit, in mixer and plasing in posstion, vibrating, striking, cuiring (but excluding the cost of reinforcement taxes and royllity all complete as per building apecification and draction of E/I.

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2.0 to 2.5 including providing 10mm thick mortar joints2, cost of screening materials, racking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.

Providing 25 mm thick D.P.C with C.C M 200 with nominal mix of (1:1.5:3) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening shuttering and mixing cement concrete in mixer with 5% cico of any other approved water roffing compound and placing in position striking curing taxes and royality all complete as per building specification and direction of E/I.

Providing designation 75 B brick work in C.M. (1:6) in Super Structure with approved quality of clean coarse sand of F.M. 2.0 to 2.5 including providing 10mm thick mortar joints2, cost of screening materials, racking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 125mm thick reinforced designation 75 A brick work in C.M ( 1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials, scafolding, raking out joints to 15mm depth, curing , taxes & royalty (but excluding the cost of reinforcement ) all complete as per building specification & direction of E/I.

Providing R.C.C M 200 with nominal mix (1:1.5:3) In lintle with approwed quality of stone chips 20mm, 26mm size graded and clean coarse sand of f.f.2.5 to 3 including screening shuttering, mixing, cement, concrit, in mixer and plasing in posstion, vibrating, striking, cuiring (but excluding the cost of reinforcement taxes and royllity all complete as per building apecification and draction of E/I.

Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in Roof Slab with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete vibration, striking, curing (but excluding the cost of reinforcement taxes and royalty all complete as per building specification & direction of E/I.

Centring and shutring including shuttring, propping etc……do……do…….all complite as per direction of E/I.(5.3.17)

Roof slab, Chajja (5.3.17.3)

Lintel, beam, Plinth beam(5.3.17.5)

Column, Piller (5.3.17.6)

Providing T.M.T reinforcement with cutting bending & binding as per apporved design and drawing excluding carriage of bars to work site, cutting, bending, and binding with anneales wire with cost of wire removal of rust, placing the rods in position all complete as per buiding specification and directon of E/I 8 mm dia

10 mm dia

12 mm dia

Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineerin- charge.

Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (±0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge.

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) For repairing.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying cramic glazed floor tile …….do…….do……...all complete as per drawing apecifiction and draction of E/I.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement morter (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes and rolity all complete as per building aspesification and draction and of E/I.

Filling foundation trenches and plinth in layers not exceeding 150 mm thick wall watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation drenches within a lead of 50 M and lift of 1.5M complete as per building specification and direction of E/I Qnty vide item no 01

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Quantity of outer wall area vide

Providing two coats of oil bond distemper of approved shade and make over a coat of cement primer over old surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffold

Carriage of materials Cement +Steel 10 km

Sand a lead of (10p+2k) km

Stone Chips a lead of (15p+1k) km

Bricks (7+1) km

Deep Boring :- Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. (a) From 0.00 M to 50.00 M below G.L.

(b) From 51.0 M to 150.00 M

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp

Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP

crompton 2 HP Starters Control Panel for Submersible Pump

FR PVC Insulated 3 Core 4 Sqmm copper wire

GI Pipes ( Tata Mark or Equivalent ) as per IS -1239 ( Part -01) 2004 ISI Marked / Medium Quality 40 mm dia

Septic Tank :- Earth work in excavation in founjdation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth as obtained to a distance upto 50M including all lift, levelling ramming the foundation tranches, removing roots of tree shurbs all complete as per approved designm building specification and direction of E/I. 1x10'0"x7'0"x7'0"=490 cft

Providing coarse clean local sand in filling in foundation tranches or in plinth including ramming and watering in layer not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement completed volume.) 1x10'0"x7'0"x0'6"=35 cft

Providing designation 75-B brick flat soling joints filled with local sand including cost of watering, taxes and royalty all complete as per building specitication and direction of Engineer Incharge. 1x10'0"x7'0"=70 sft

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone metal gradw III (53 to 22.4 mm size) and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixturem placing in position, vibration, striking, curing, taxes, and royalty all complete as per building specification and direction of E/I. 1x10'0"x7'0"x0'6"=35 cft

Providing desigation 75B brick works in C.M (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar juints, cost of screening materials raking out jounts to 15mm depth curing taxes & royalty all complete as per building specification and direction of E/I. 2x10'0"x0'10"x7'0"=116.67 cft 2x5'4"x0'10"x7'0"=62.22 cft Total=178.89 cft

Providing desigation 75 A brick works in C.M (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar juints, cost of screening materials raking out jounts to 15mm depth curing taxes & royalty all complete as per building specification and direction of E/I. 1x5'4"x7'0"=37.33 1x5'4"x6'0"=32.00 Total=69.33 sft

Providing R.C.C M-20 with nominal mix of (1:1.5:3)) in roof slab with approved quality of stone chips 20mm to 6,, size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing (but excluding the cost of reinforcement) taxes adn royalty al complete as per building spceifiction and direction of E/I. 1x10'0"x7'0"x0'4"=23.33 cft

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in DADO including rounding of junctions with floor, cuuring, taxes and toyalty all complete as per building specification and direcrtion of E/I. 2x7'6"x7'0"=105 2x2x5'4"x7'0"=149.32 2x5'4"x6'0"=64 1x7'6"x5'4"=40 Total=358.32 sft

Providing TMT reinforcement of following dia rods as per approved design and drawing including carriatge of M.S rods of (straight of in coils ) to work site, cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in positon all complete as per building specification and direction of E/I. 0.66@ 80kg/m3=52.80 kg or 0.0528 MT

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Centring and shutring including shuttring, propping etc……do……do…….all complite as per direction of E/I.(5.3.17)

CARRAIGE OF MATERIALS Sand a lead of (10p+2k) km

Stone Chips a lead of (15p+1k) km

Bricks (7+1) km

Cement +Steel 10 km

Sanitary & Water Supply Works :- Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all complere as per specification and direction of E/I.

Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I. Horizontal - 32mm dia

Vertical - 25 mm dia

Providing and fixing 15mm size C.P. brass pillar cock (Weight not less than 350 gms.) C.I. body brass spindle pillar cock of approved quality as per specification and direction of Engineer-in-charge. C.I. body brass spindle

Cutting chhajja or corince for laying G.I. / C.P.V.C pipe and restoring the same with R.C.C. (1:2:4) brick work in cement mortor (1:4) as per specification and direction of E/I.

Making holes in walls for laying G.I. / C.P.V.C pipe and restoring the same after pipe laying as per specification and direction of E/I. 125 mm thick wall

250 mm thick wall

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror - 600mm x 450mm

Glass shel with C.P. brass rail - 450mm x 125mm

C.P. brass towel rail 20mm x 600mm with bracket container

C.P. brass soap dish container medium quality with screw and hinges etc.

C.P. bras liquid soap container

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I. With 10 Liter Low Level P.V.C. cistern

Supplying fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindl stop cock approved quality of weight not less than 30 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door - 110x110x110 mm

Single tee without door - 110x110x110 mm

Bend 87.5° - 110mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels) (PVC) Polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing PTMT grating of approved quality and colour. Circular type - 100mm dia

Supplying the follwing bathroom fittings all complete (VIP) Pillar cock (Long neck)

Electrical work :- Point wiring in PVC conduit, with modular type switch - Point wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required. Group B

Circuit/submain wiring in PVC conduit - Wiring for Circuit/submain wiring along with earth wire the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2 x1.5sq.mm. + 1 x1.5sq.mm. earth wire

2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire

2 x 4 sq.mm. + 1 x 4 sq.mm. earth wire

S/F Modular type switch socket - Supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required 5/6 amps, one way switch

3 pin 5/6 a,ps. Socket outlet

S/F light plug point with modular type accessories - Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc. as required

ITC exhaust fan upto 450mm sweep - Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing commissioning etc. as required.

S/F S.P. MCB DB - Supplying and fixing following way single pole netural, sheet, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 12 way, Double Door

S.I.T.C. of following rating, surface mounted LED light fitting, suitable for 230V 50Hz, single phase supply etc. complete as required. 12" (300mm) metal exhaust fan

LED Street light (45/48W)

9/10 Watt LED Bulb

Add 18% GST

Add 1% LC

Please Enable Macros to View BoQ information