Repairs/ Replacement to security wall, compound wall and fencing at Aurangabad under GE (S) Ahmednagar

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar/cement lime mortar including all quoins, arches, pillars,etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Taking down cement or cement lime plaster including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and as directed

Demolition plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling old barbed wire / chain link fencing, any description complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) embedded in concrete, brick work, masonry etc, any section including taking out embeded portion and making good disturbed ground complete all as specified and as directed.

Excavation in trenches, not exc. 1.5m wide and n.exc 1.5 m in depth, in soft/loose soil for foundation, laying pipes, for drains or manholes etc, n exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out including trimming sides and forming bottom surfaces to required level/slope etc complete all as specified and as directed.

Excavation in post holes in any type of soil each not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick with soils all as specified and as directed.

Removing excavated soil to a distance exc 250 m and n exc 500 m, depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundations filling and mass concrete all as specified and as directed.

M&L for PCC 1:3:6, type C2, using 40mm graded stone aggregate as in foundations concrete for fencing post or struts all as specified and as directed.

M&L for PCC 1:3:6, type C1, using 20mm graded stone aggregates as in coping cills, plinth courses string courses, bed plates for fixing fencing posts, kerbs etc including necessary formwork complete all as specified and as directed.

S&F in repairs, precast cement concrete, 1:2:4, type B0, using 12.5mm graded stone aggregates as in jalli, 35 mm thick (measured solid), set in cement mortar 1:4 complete all as specified and directed.

M&L for RCC 1:2:4, type B1, using 20 mm graded stone aggregate as in plinth band and similar work complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No 16 but except bricks Note : Old bricks obtained from demolition shall be used.

Use and waste formwork to sides of plinth band and similar work for fair finished surface of concrete all as specified and as directed.

S&F mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per serial item No 19 but mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders.

S&F mild steel angle/flat iron as in supports for posts/strut for securing barbed/chain link fencing any description including drilling holes, notching for wire etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F mild steel round bars as line bars for fixing chain link fencing, conforming to FE 410 W( Gde-E-250) quality or FE 290 (Gde -E-165) complete all as specified and as directed.

M&L for machine made, mild steel bolts, 10 mm dia shank with hexagonal or square head one end and screwed the other or screwed both end, each screwed end to be fitted with, washers and one hexagonal or square nut, length length of bolt exc 5cm but n exc 10cm complete all as specified and as directed.

Supply only chain link fencing net MS galvanised, made out of GI wire of 8 to 10 mm gauge, aperature not exceeding 65 mm, weight not less than 3.5 kg/sqm all as specified and as directed. Note : Payment shall be allowed after ascertaining weight of chain link as per actual at site through BOO as ordered by GE.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards,rails, straining bolts etc including provision of bindig wire complete all as specified and as directed.

S&F galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished surfaces even and fair all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair faces of brick work, finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of wall/jalli and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old decorated surface of wall and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparing new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

M&L for preparing new or previously untreated steel surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M/s.M G Kulkarni

M/s S.R lahoti

M/S Tirupati Goroba Shendge

M/S. M.A. Sharief engineers and contractors