Loading…
Loading…
Tender Value
₹24.9 L
EMD Value
₹49,735
Closing Date
29 Sept 2026, 3:00 pm2d left
Executive Engineer
Executive Engineer, PHED, APWD, Prothrapur
Improvement and augmentation of raw water supply by laying of raw water pipeline from Jun Jun nallah check weir III to Beodnabad pump house and suction and delivery pipeline from Lallmitti raw water tank
2026_APWD_24791_1
NIT No.11/DB/PHED/2026-27
Open Tender
Miscellaneous Works
Percentage
30 days
PHED Prothrapur
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹49,735
24 Sept 2026
24 Sept 2026
30 Sept 2026
24 Sept 2026
29 Sept 2026
25 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil | |||||
| 1.01 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | 210 | metre | 402.25 | ₹84,472.5 |
| 2Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : | |||||
| 2.01 | Up to 300 mm dia | 3.41 | qtl | 11,678.25 | ₹39,822.83 |
| 3Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : | |||||
| 3.01 | 200 mm diameter pipe | 29 | each | 1,000.45 | ₹29,013.05 |
| 3.02 | Supplying pig lead at site of work. | 1.45 | qtl | 36,544.9 | ₹52,990.11 |
| 4Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : | |||||
| 4.01 | 150 mm diameter Class II | 2 | each | 9,899.8 | ₹19,799.6 |
| 4.02 | 200 mm diameter Class II | 5 | each | 20,028.45 | ₹1,00,142.25 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
Tendernotice_2.pdf
PDF • 2.03 MB
BOQ_26240.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .