PROVN OF FLOORING SOAKAGE PIT AT BLDG NO P 46 AND SECURITY WALL UNDER GE NARANGI

Amount

M&L Excavating over areas not exceeding 1.5 metre deep and getting out in soft/loose soil complete all as specified and directed.

M&L Excavating over areas exceeding 1.5 metre and not exceeding 3.00m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and not exceeding 1.5 m in depth for foundation etc, or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed.

M&L for loose filling with broken bricks as in soakage pits, soak well etc complete al as specified and directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed.

Removing of surplus excavated material not exc 50m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed.

M&L hardcore of gauge n exc. 63mm with broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Columns, pillars, piers, posts and struts etc.complete all as specified as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in beams, seimic bands, cantilevers, bressumers and lintels complete all as specified as directed.

M&L RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in slabs supported on walls , beams and columns in floors, roofs, landings, balconies, casnopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified as directed.

Use and waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified as directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified as directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:4 etc complete all as specified as directed.

M & L brick work with sub class -B bricks, straight or curved on plan any radius built in CM 1:4 in half brick thick work complete all as specified and directed.

M & L brick work with sub class -B bricks, in one brick thick honey honey comb walling built in CM 1:4 complete all as specified and directed.

S & F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints as in weep holes fixed in wall complete all as specified and as directed

M&L broken glass coping on top of wall in CM 1:3 complete all as specified and as directed.

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for mild steel TMT bars 6 mm dia and over upto and including 8mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.

S&F Rolled mld steel framed work as in ornamental and intricate designed steel gates with gusset plates, rails, braces etc complete, end of bars shouldered and /or riveted, or forged into spikes and similar works to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging doors fittings and hanging, also fastening and fixing confirming to Fe-410-W ( Gde-E-250) quality A complete all as specified & as directed.

S&F rolled mild steel framed works as in doors or gates of angle or other section with gusset plates,, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hangings also fastening and fixing etcconforming to Fe.290.Gde-E-165.

S&F rolled mild steel plates ( plain or chequrred) channels, square cut or notched ( ordinary or counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe-290 Gde E-165 complete all as specified & as directed.

S&F rolled mild steel running rails and guides for sliding doors fixed with angle cleats or other connecting plates to the road surfaces and making good after fixing complete confirming to Fe-290 Gde E-165 complete all as specified & as directed.

Dismantling old barbed wire of any description fixed in any type of post complete all as specified and directed.

Dismantling of posts or struts ( Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work or masonary and making good disturbed surfaces complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition)) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for 100 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregates) as in path / paving / hard standing / floor cement complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.complete all as specified and as directed .

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with liquid water proofing compound (@ 200ml per 50 kg weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on other than fair faces of brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer over a coat of cement based putty complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L for mirror polished Granite work 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like with and including 20 mm bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and directed.

S & F , 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S & F , 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

M/S M Ahmed and Co.