Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC 2ND FLOOR LAXMI BHAVAN BEHERAMAL JHARSUGUDA ODISHA | JHARSUGUDA | JHARSUGUDA | ODISHA | 768203 | L1 | Accepted-AOC Techno-commercially accepted as L1 bidder | |
| 2 | L2₹12.9 L+₹53,980.31 (4.38%)Rejected-Finance AT BUDBIJAM PO ORIENT COLLIERY BRAJRAJNAGAR DIST JHARSUGUDA ODISHA 768216 | BRAJRAJNAGAR | JHARSUGUDA | ODISHA | 768216 | L2 | Rejected-Finance Rejected for not being L1 bidder | |
| 3 | L3₹17.8 L+₹5.5 L (44.7%)Rejected-Finance AT GURUDHWAR NEAR UCO BANK SOUTH BALANDA TALCHER DIST ANGUL ODISHA PIN 759116 | TALCHER | ANGUL | ODISHA | 759116 | L3 | Rejected-Finance Rejected for not being L1 bidder | |
| 4 | L4₹18.6 L+₹6.3 L (51.2%)Rejected-Finance | L4 | Rejected-Finance Rejected for not being L1 bidder |
Tender Value
₹19.6 L
EMD Value
₹24,500
Closing Date
27 Mar 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
S. N. ALI, SO(EnM), ORIENT AREA, MCL
ENM DEPARTMENT, OFFICE OF THE GENERAL MANAGER, ORIENT AREA, MCL, BRAJRAJNAGAR, DIST-JHARSUGUDA, ODISHA-768216
Electrification and lighting arrangement at MT Hostel, Orient Area, MCL
2023_MCL_275301_1
MCL/GM/OA/EnM/e-Ten/22-23/10 Dated.15/03/2023
Open Tender
Electrical and Maintenance Works
Item Rate
45 days
EnM DEPARTMENT, ORIENT AREA, MCL
AS PER NIT
4 documents required · 4 mandatory
₹24,500
14 Apr 2023
15 Mar 2023
28 Mar 2023
15 Mar 2023
27 Mar 2023
16 Mar 2023
15 Mar 2023 - 20 Mar 2023
Amount
Supplying of Metallic tubular pole 12 mtr long swaged type steel designated 410SP66
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required (pole height-12M)
Supplying & Erection of Stay set complete (galvanized) with 19/20 mm dia X 1.8 Meters long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Supplying of 55 sqmm ACSR conductor
Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter and above including binding etc. as required.. 3500 mtr X 0.342 kg/mtr = 1197
Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11 kv overhead line conductors complete with through bolts & nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side to for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.
Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required.
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 Kg per metre) pole top bracket/ cross arm for single 11 KV overhead line conductor complete with 50 mm X 6 mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.
Supplying of Channel iron 75 mm X 40 mm X 6 mm (7.14 Kg per metre) V Shape Cross arm for two 11 KV overhead line conductors complete with 50 mm X 6mm M.S. flat iron clamps bolts and nuts including drilling holes for insulator pins bolts nuts and washers etc (as per drawing ) and painting with primer and finish paint as required.
Erection of pole top/straight two wire/ v shape two wire, angle iron/channel iron, cross arm on steel tubular/rail/PCC pole for 11/22/33 KV as required 16 set ( 08 Top Bracket & 08 V shape Bracket)
Supplying & Erection of 11 KV disc insulator for 11 kv over head lines with galvanized insulator fittings, ball and socket type and complete with galvanized strain clamps, bolts, nuts, washers etc. as required.
Supplying and erection of a set of cross bracing FRLSame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required
Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.
Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.
Supply & Installation of 3 pole 11 KV grade 200 Amp rating Gang Opertaed Air Break Switch (GOAB) Rotatong Double break Isolator, Horiontal type complete set with all accessories like phase coupling rod & operating rod, tubular electrical copperconductor having 200 amp capacity as a moving contatct.11KV A.B. Switch Set shall be the gang operated rotating double air break type having 3 post insulators per phase. The operating mechanism shall be suitable for manual operation from the ground level and shall be so designed that all the three phases shall open or close simultaneously..The A.B. Switches shall be suitable for horizontal mounting in double pole sub-station structures. MS Galvanized base Channel & base support channel should be of min. size 75x40x6 mm
Supply & Installation of H.G. Fuses 3 pole 200 Amp rating shall have adjustable arcing horns made of solid copper rod having 7.62 mm dia. The horns shall be fitted with screwing devices with flynuts for fixing and tightening the fuse wire.The minimum clearance between the adjacent phases of the fuse set shall be 760 mm and the centre to centre (distance between two post insulators of the same phase) shall be 410 mm. All metal (ferrous) parts shall be galvanized and polished. Only 12 KV post insulator ( orginal cemented and not pin insulators shall be used for the H.G. Fuse Set). The H.G.Fuse shall be suitable for horizontal mounting in double pole sub-station structures. MS Galvanized base Channel & base support channel should be of min. size 75x40x6 mm.
Supplying of Metallic tubular pole 10 mtr long swaged type steel designated 410SP66
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required (pole height-10 M)
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .
Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.
Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required.
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
Installation of Wall Fan in the existing surface, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (LED TUBELIGHT & SURFACE LED LIGHT 15 W)
Supplying of 11 KV 3 CORE 120 sqmm ARMOURED Cross linked polyethene and XLPE insulated PVC outer sheated cable with alumnium conductor suitable for rated voltage at 11000 volts grade and confirming to IS:7098 part-I 1988 with amendment number 1,2 & 3 reaffirmed 2005
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11KV grade of 3 core 120 sqmm cable size in the existing RCC/ HUME/ METAL pipe as required. Upto 120 sq. mm
Supplying of 1.1 KV 3.5 CORE 150 SQMM AL ARMOURED CABLE Cross linked polyethene and XLPE insulated PVC outer sheated cable with alumnium conductor suitable for rated voltage at 1100 volts grade and confirming to IS:7098 part-I 1988 with amendment number 1,2 & 3 reaffirmed 2005
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 core 150 sqmm cable size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering Above 35 sq. mm and upto 95 sq. mm
Supplying of 1.1 KV 3.5 CORE 70 SQMM AL ARMOURED CABLE Cross linked polyethene and XLPE insulated PVC outer sheated cable with alumnium conductor suitable for rated voltage at 1100 volts grade and confirming to IS:7098 part-I 1988 with amendment number 1,2 & 3 reaffirmed 2005
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 core 70 sqmm cable size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering Above 35 sq. mm and upto 95 sq. mm
Fixing of LED FLOOD LIGHT on existing surface with 32 mm dia GI pipe complete with all accessories and conection as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Fixing of 2 core 10 sqmm PVC unarmoured Aluminium cable on existing surface as required
Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.
Supplying and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 3 X 120 sq. mm
Supplying and fixing 400 Amp Bus Bar with box horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required..
Supply & fixing@(10% of unit cost) of LED strip lights
PVC wire 1core 1.5sq.mm copper wire required for connection Basic rate of materials-1101
Fevicol for fixing the LED strip lights
Supply of Fountain light(waterprooof) confirming to IP68
Supply and fixing of DP MCB 32A, confirming to relevant IS, reputed make
Supply and fixing of MCB Cover Size - Standard for DP MCB Switch
Supplying and filling in plinth with river sand under floors, including watering,ramming consolidating and dressing complete.
surface dressing of the Sround including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m
Supply of stone metal aggregates 53mm to 22.4mm
Total impact of GST for the purpose of CTC
M/s BIKASH ENTERPRISES
M/s Evergreen Electrical Works
MARUTI CONSTRUCTIONS
stage.html
html • 0.04 MB
techsummary_284947.pdf
PDF • 0.41 MB
finsummary_284947.pdf
PDF • 0.96 MB
LOAMTHOSTEL10.pdf
PDF • 0.40 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .