PROVN OF WATER FOUNTAIN AND ARBORICULTURE INFRONT OF P-01 BLDG IN HQ 34 WEU UNDER GE MINNIE BAY, SRI VIJAYA PURAM

M&L for supply, stacking and spreading of good soil well seived 90% to pass through IS seive of 10 mm size free from stone rubbish and lumps Stone, roots and other foreign materials all as directed.

Zinnia

Daisy

Dahlia

Marry Gold

Hydrangea

Exrora

M&L for supply and spreading at site well decayed locally available vermi compost well dried, wellpowderd, without clouds and free from stones and other rubbish materials vermi compost will be measured by measuring bags 25 Kg weight on site all as directed by Engr-in-charge.

M&L for supply and spreading for providing of river sand from main land .sand shall not contain any pebble or stonesor sea shell any vegetration leaves/branches/roots of tre and shall not contain silt more than 50% all as directed.

Supply and planting best quality of yellowish dhurinda hedges of height not less than 0.60 mt at site complete all as directed.

Supply and planting best quality of Red hedges of height not less than 0.60 mt at site complete all as directed.

Supply and planting best quality of Green hedges of height not less than 0.60 mt at site complete all as directed.

Supply and spraying at site medicine and insecticides for planting as required complete all as directed.

M&L Preparation of ground for planting grass and up rooting vegitation and removing if any and grassing with Carpet grass including watering and maintenance of the lawn for 15 days or more till the grass from a thick lawn from weeds and fit for mowing including royality and carriage all tools ,plants, taxes ,octroi, transportation charges fromChannai to Port blair in container , and Two month of special maintenance skiilled gardener supply of manuar insecticides. Note- the Good earth shall be paid for separetely.

Excavating over areas not exceeding 1.5m deep and getting out in Hard/dense soil complete all as specified and directed.

Excavating over areas exceeding 1.5m deep and not exceeding 3m deep and getting out in hard/dense soil complete all as specified and directed.

M&L 100mm cement concrete type C-2 ,1:3:6 (40mm graded aggregate) in sub floors,sub bases,floors and pavings etc all as specified and directed.

M&L formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits of foundation (if any) and plinth beams for fair finished surfaces of concrete, curved, complete all as specified and as directed.

M&L formwork to faces of walls, retaining/drain walls and similar work including attached pillasters, buttresses etc., vertical or to batter for fair finished surfaces of concrete, curved, complete all as specified and as directed.

M&L TMT bars 10mm dia and over as reinforcement cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L RCC M-30 nominal mix using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete

M&L RCC M-30 nominal mix using 20mm graded stone aggregate as in retaining walls, basement walls and the like any thickness above top of footing including attached pillasters and butresses complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as directed.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) complete all as specified and as directed.

M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces and finishing the top surface even and fair without using extra cement complete all as specified and as directed.

S&F glass mosaic swimming pool tile (Blue colour) of size 247mm x122 mm 8mm thick fixed in vertical and horizantal surface over 15 mm thick bedding layer in CM 1:4 jointed in neat cement slurry and pointed in white cement mixed with pigment match to the shade of tile complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Make- Asian Apex Ultima,Berger Weather coat Long life flexo

M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in CM 1:6 all as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engr in Charge.

M&L for interconnection of nozzles, foam jets, valves, UPVC pipes, under water lights, LED drivers with proper design and including providing water proof tapes, supports etc., including testing and commissioning complete all as specified and as directed. Note : The items nozzles, foam jets, UPVC pipes, under water lights shall be measured and paid separately.

Supply only chromium plated brass diamond jet nozzle of size 1" dia complete all as specified and as directed.

Supply only chromium plated brass foam jet nozzle of size 1/2" dia complete all as specified and as directed.

Supply only RGB type LED under water light fittings stand type comprising of epoxy powder coated housing, enclosed with glass cover in frame with lumen output not less than 980 lumens having secondary optics min wattage 12 watt with ingress protection IP 68 THD less than 10%, CRI>80, PF>0.9, IK>08, SPD of capacity 10 KV complete all as specified and as directed.

Supply only RGB type LED under water light fittings suitable for fixing on foam jet type nozzle comprising of epoxy powder coated housing, enclosed with glass cover in frame with lumen output not less than 980 lumens having secondary optics min wattage 9 watt with ingress protection IP 68 THD less than 10%, CRI>80, PF>0.9, IK>08, SPD of capacity 10 KV complete all as specified and as directed.

Supply only LED driver suitable for under water lights, transformer type of min wattage 105W, 220V AC as incoming and 12V as outgoing, 50Hz with ingress protection IP 68 complete all as specified and as directed.

Supply only CPVC pipes outer diameter 20mm SDR 13.5 pipes & plain CPVC SDR 11 fittings complete all as specified and as directed.

Supply only CPVC pipes outer diameter 50mm SDR 13.5 pipes & plain CPVC SDR 11 fittings complete all as specified and as directed.

Supply only CPVC ball valve suitable for CPVC pipes outer diameter 50mm complete all as specified and as directed.

Supply only CPVC ball valve suitable for CPVC pipes outer diameter 20mm complete all as specified and as directed.

Supply only flat three core PVC insulated & PVC Sheathed copper conductor of size 4 sqmm for submersible pump motors 1100 volt complete all as specified and as directed

Supply only flat three core PVC insulated & PVC Sheathed copper conductor of size 1.5 sqmm for submersible pump motors/ lights, 1100 volt complete all as specified and as directed

Supply, install, testing and commissioning Pumping sets 15 HP, submersible, electric driven, 415 Volt complete all as specified and as directed.

Supply, install, testing and commissioning Pumping sets 3 HP, submersible, electric driven, 415 Volt complete all as specified and as directed.

S&F Digital timer with C&T manual time switch, contactor pre wired distribution board complete time lite 63A 3 pole 415V complete all as specified and as directed.

S&F Star Delta motor starter 15 HP comprising of steel body with powder coated paint, 415V, 11.2KW, 50Hz including circuit breaker suitable contactor overload relay with start and stop button for manual control including indicator lamp complete all as specified and as directed.

S&F DOL motor starter 3 HP comprising of steel body with powder coated paint, 415V, 2.4KW, 50Hz including circuit breaker suitable contactor overload relay with start and stop button for manual control including indicator lamp complete all as specified and as directed.

Please Enable Macros to View BoQ information