Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER. | |
| 2 | L2₹35.1 L+₹3.2 L (10.1%)Rejected-Finance SHOP NO 18 1ST FLOOR NORTH LAND BUILDING SECTOR NO 1 BACK SIDE OF BANK OF MAHARASHTRA INDRAYANI NAGAR BHOSARI PUNE 411039 | PUNE | MAHARASHTRA | 411039 | L2 | Rejected-Finance NOT THE LOWEST TENDERER. | |
| 3 | L3₹36.8 L+₹4.9 L (15.4%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER. | |
| 4 | L4₹37.1 L+₹5.2 L (16.2%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER. | |
| 5 | L5₹37.3 L+₹5.4 L (17.1%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER. |
| Sl No | Description | Qty | Unit | M/S JAYCONSTRUCTION CO L1 | Sunrise Traders L7 | M/S SUGAM CONSTRUCTION L3 | SAMBHAJI D JARANDE L4 | ShreHari Civil Enginneering and Contractors L2 | BHARDWAJ ENTERPRISES L9 | S V CONSTRUCTION L5 | A B S ENTERPRISES L8 | M/S SANDEEP CONSTRUCTION COMPANY L6 | BHABA CONSTRUCTION L10 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. | 137 | Sqm | 20 ₹2,740 Lowest | 90 ₹12,330 | 50 ₹6,850 | 51 ₹6,987 | 50 ₹6,850 | 200 ₹27,400 | 50 ₹6,850 | 200 ₹27,400 | 100 ₹13,700 | 100 ₹13,700 |
| 2.00 | Material & Labour for Earthwork in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5mtr in width or 10sqm on plan) in all kinds of soil including dressing of sides and ramming of bottoms, lift upto 1.5mtr, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50mtr complete all as specified and directed. | 48.5 | Cum | 650 ₹31,525 | 1,200 ₹58,200 | 650 ₹31,525 | 651 ₹31,573.5 | 350 ₹16,975 Lowest | 800 ₹38,800 | 2,000 ₹97,000 | 400 ₹19,400 | 1,800 ₹87,300 | 1,000 ₹48,500 |
| 3.00 | Material & Labour for earthwork in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan) in hard rock including dressing of sides and ramming of bottoms, lift upto 1.5 mtr, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mtr complete all as specified and directed by Engineer-in-charge.
(Note : Hard Rock (other than 'MANJRA' Rock) obtained from excavation shall be handed over to the contractor as contractor's properties and an amount of Rs 1100.00 per Cum shall be recovered from him as shedule of credit) | 20 | Cum | 2,600 ₹52,000 | 2,200 ₹44,000 | 2,600 ₹52,000 | 2,601 ₹52,020 | 2,600 ₹52,000 | 2,000 ₹40,000 | 2,500 ₹50,000 | 500 ₹10,000 Lowest | 1,800 ₹36,000 | 3,000 ₹60,000 |
| 4.00 | Material & Labour for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed. | 7.65 | Cum | 2,500 ₹19,125 | 4,500 ₹34,425 | 4,000 ₹30,600 | 4,001 ₹30,607.65 | 4,000 ₹30,600 | 3,500 ₹26,775 | 6,000 ₹45,900 | 450 ₹3,442.5 Lowest | 5,000 ₹38,250 | 3,000 ₹22,950 |
| 5.00 | Material & Labour for RCC M-25 (design mix concrete) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. | 7.6 | Cum | 8,000 ₹60,800 | 9,000 ₹68,400 | 9,000 ₹68,400 | 9,001 ₹68,407.6 | 8,500 ₹64,600 | 8,000 ₹60,800 | 7,000 ₹53,200 | 450 ₹3,420 Lowest | 8,000 ₹60,800 | 7,000 ₹53,200 |
| 6.00 | Material & Labour for RCC M-25 (design mix concrete) as in Columns, pillars, piers, posts and struts complete all as specified and directed. | 6 | Cum | 9,000 ₹54,000 | 9,000 ₹54,000 | 9,500 ₹57,000 | 9,501 ₹57,006 | 9,000 ₹54,000 | 8,000 ₹48,000 | 7,200 ₹43,200 | 620 ₹3,720 Lowest | 10,000 ₹60,000 | 7,500 ₹45,000 |
| 7.00 | Material & Labour for RCC M25 (design mix concrete) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. | 10 | Cum | 9,500 ₹95,000 | 9,500 ₹95,000 | 9,000 ₹90,000 | 9,001 ₹90,010 | 9,000 ₹90,000 | 8,000 ₹80,000 | 7,500 ₹75,000 | 650 ₹6,500 Lowest | 10,000 ₹1,00,000 | 9,000 ₹90,000 |
| 8.00 | Material & Labour for RCC M-25 (design mix concrete) as in beams, cantilevers, bressummers, lintels over 1.5mtr span complete all as specified and directed. | 6.3 | Cum | 9,500 ₹59,850 | 9,800 ₹61,740 | 10,000 ₹63,000 | 10,002 ₹63,012.6 | 9,000 ₹56,700 | 8,000 ₹50,400 | 7,500 ₹47,250 | 650 ₹4,095 Lowest | 8,000 ₹50,400 | 9,500 ₹59,850 |
| 9.00 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. | 38 | Sqm | 450 ₹17,100 | 450 ₹17,100 | 500 ₹19,000 | 501 ₹19,038 | 500 ₹19,000 | 500 ₹19,000 | 320 ₹12,160 Lowest | 700 ₹26,600 | 1,000 ₹38,000 | 460 ₹17,480 |
| 10.00 | Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed. | 82 | Sqm | 450 ₹36,900 | 500 ₹41,000 | 500 ₹41,000 | 501 ₹41,082 | 500 ₹41,000 | 500 ₹41,000 | 400 ₹32,800 | 120 ₹9,840 Lowest | 1,000 ₹82,000 | 460 ₹37,720 |
Tender Value
Refer Docs
EMD Value
₹64,960
Closing Date
9 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MH AND RH KHADKI
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Khadki, Pune 411003
PROVN OF ONE GUARD ROOM ALONGWITH ATTACHED TOILET AND BATHROOM AT KLP OF WADGAON SHERI, PROVN OF LADIES TOILET AT KLP HQ 41 ARTY DIV AT WADGAON SHERI, PROVN OF MOSQUITO PROOFING TO THE DOORS AND WINDOWS OF ALL OFFICES AND CONTROL ROOM OF 41 ARTY DIV
2025_MES_731429_1
8729/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH AND RH KHADKI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH AND RH KHADKI
₹64,960
4 Dec 2025
18 Sept 2025
11 Oct 2025
18 Sept 2025
9 Oct 2025
2 Oct 2025
18 Sept 2025 - 9 Oct 2025
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.
Material & Labour for Earthwork in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5mtr in width or 10sqm on plan) in all kinds of soil including dressing of sides and ramming of bottoms, lift upto 1.5mtr, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50mtr complete all as specified and directed.
Material & Labour for earthwork in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan) in hard rock including dressing of sides and ramming of bottoms, lift upto 1.5 mtr, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mtr complete all as specified and directed by Engineer-in-charge. (Note : Hard Rock (other than 'MANJRA' Rock) obtained from excavation shall be handed over to the contractor as contractor's properties and an amount of Rs 1100.00 per Cum shall be recovered from him as shedule of credit)
Material & Labour for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.
Material & Labour for RCC M-25 (design mix concrete) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Material & Labour for RCC M-25 (design mix concrete) as in Columns, pillars, piers, posts and struts complete all as specified and directed.
Material & Labour for RCC M25 (design mix concrete) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material & Labour for RCC M-25 (design mix concrete) as in beams, cantilevers, bressummers, lintels over 1.5mtr span complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, lintels etc for fair finished, flat surfaces of concrete complete all as specified and directed
Formwork to the soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces complete all as specified and directed.
Material & Labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material & Labour for TMT bars 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in roof slab complete all as specified and directed.
Material & Labour for TMT bars 8mm dia as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.
Removing excavated soil exceeding 250mtr but not exceeding 500mtr and depositing where directed at a level not exceeding 1.5mtr complete all as specified and directed.
Removing excavated rock (manjara) exceeding 250mtr but not exceeding 500mtr and depositing where directed at a level not exceeding 1.5mtr complete all as specified and directed.
Material & Labour for brickwork with fly ash bricks, old size, straight or curved on plan exceeding 6mtr mean radius, built in CM 1:6 complete all as specified and directed.
Material & Labour for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, as in half brick thick walls built in CM 1:4 complete all as specified and directed.
Material & Labour for rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound and finished even and smooth complete all as specified and directed. (Note : WPC shall be measured & paid seprately)
Material & Labour for 10mm thick plastering on fair faces of brickwork or concrete surface in CM 1:6 with finishing the surface even and smooth without using extra cement complete all as specified and directed.
Material & Labour for rendering 5mm thick in cement mortar 1:4 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement complete all as specified and directed.
Material & Labour for preperation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint (apex Ultima or equivalent) with approved colour and pattern over a coat of primer as on walls of Bldgs of upto 10 mtr height including necessary scaffolding and safety measures and procedure complete all as specified and directed.
Material & Labour for preparation of newly plastered surfaces of wall applying two coats of Acrylic washable distember (Make : Asian Brand 'Tractor UNO' or equivalent) over one coat of trucare internal wall primer over one coat of acrylic wall care putty of 1mm thickness complete all as specified and as directed.
Material & Labour for applying three coats of white wash to newly plastered wall surface including preparation of surfaces complete all as specified and directed.
Material & Labour for applying three coats of white wash to newly plastered ceiling surface including preparation of surfaces complete all as specified and directed.
Supply only Integrated water proofing compound complete all as specified and directed
Supply & Fix Galvanised steel water tubing medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls/ceilings or laid in floors etc complete all as specified and directed for following bore of pipes:-
(a) 15mm dia bore
(b) 20mm dia bore
Supply & Fix rotational moulded polyethylene water storage tanks triplle layer of capacity 500 Ltrs ( cylindrical vertical with closed top) hoistsed and ficed in position complete all as specified and directed.
Supply & Fix 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed ( Minimum weight 15 mm - 142 grams/20 mm - 210 grams. 25 mm - 455 grams) complete all as specified and directed.
Supply & Fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc complete all as specified and directed.
Supply & Fix PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe etc and connected to water closet as per manufacturers instructioncomplete all as specified and directed.
Supply & Fix stop valves cast copper alloy CP screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15 mm dia complete all as specified and directed.
Supply & Fix PVC connections 15mm size with brass nut on both end washers of length 600mm complete all as specified and directed.
Supply & Fix wash hand basin vitreous china white flat back of size 550mm x 400 mm including PVC flexible waste pipe 32 mm bore 600mm long PVC connection pipe, chromium plated brass waste fittings 32 mm including 15 mm bore chromium plated pillar taps complete all as specified and directed.
Supply & Fix in repairs 32mm dia waste coupling of PTMT (half or full threaded) Minimum weight 32mm to 45gms/40mm to 60 gms) complete all as specified and directed.
Supply & Fix soap dish, vitreous China white, approximate size 160mm x 160mm x 90mm complete all as specified and directed.
Supply & Fix 15mm dia pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.
Supply & Fix chromium plated shower rose of size75mm with swivel joints including shower arm 15mm size, 195mm long with bend of 45 degree with flange for fixing with 15mm dia pipe complete all as specified and directed
Supply & Fix 15mm dia bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply & Fix Vitreous China bowl urinal flat back, size of 465mm x 355mm x 265 mm white (minimum), with grating and union for discharge pipe (including, flush pipe and waste pipe) complete all as specified and directed.
Supply & Fix towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified and directed.
Supply & Fix 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 including making thread for fixing with waste coupling complete all as specified and directed.
Supply & Fix PVC ( SWR) floor trap,75mm outlet dia plain with grating including joining with solvent cement complete all as specified and directed.
Supply & Fix PVC (SWR) pipes 110 mm dia single sockets, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.
Supply & Fix PVC (SWR) pipes 75 mm dia single sockets, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.
Supply and Fix in repairs PVC (SWR) bend any radius with access door suitable for 110mm dia pipes complete all as specified and directed.
Supply and Fix in repairs PVC (SWR) bend any radius with access door suitable for 75mm dia pipes complete all as specified and directed.
Supply and Fix in repairs PVC (SWR) vent cowl suitable for 110mm dia vent pipe complete all as specified and directed.
Material & Labour for machine cut kota stone slab flooring 20 to 25mm thick in flooring but one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing moulding complete, over and including 15 mm thick screed bed or bedding in CM 1:4 for laying floor finishes complete all as specified and directed.
Material & Labour for Coloured ceramic tiles in vertical surface 300mmx450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
Material & Labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry to match the work using colour tiles over and including 15mm thick bedding layer in cm 1:6 complete all as specified and directed
Material & Labour for PCC 1:4:8 Type D2 using 40mm graded stone aggregates as in sub base of the floor of 75mm thick complete all as specified and directed.
Material & Labour for 75 mm thick PCC 1:3:6, type C1 as in Plinth Protection surfaces finished even and smooth without using extra cement incl necessarey form work complete all as specified and directed.
Material & Labour for forming Contraction (Dummy) joints 50mm deep x 10mm wide, filled with sealing compound Grade 'B' complete all as specified and directed.
Material & Labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
Supply & Fix Pressed steel frame for doors of size 125x 60mm made out of 1.25mm steel sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one shop coat of red oxide primer complete, as specified, supplied and fixed complete all as specified and directed.
Material & Labour for cement concrete 1:3:6 type C-0 using 20mm graded aggregate for filling in pressed steel door frames complete all as specified and directed.
Supply & Fix 35mm thick Plain, framed, factory made panelled shutters of 2nd class hard wood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.
Supply & Fix 35mm thick factory made 2nd class hard wood glazed and skelton door shutters ( two pannel) open rebated and prepared to receive glass/wire gauze etc, (without sash bars) edges of raming plain chamfered or rounded fitted with cut and mitred beads for receving glass etc sizes of members ofshutters as specified in SSR Part -Isection 8, clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed
Supply & Fix butt hinges, 100mm size medium weight cold rolled mild steel complete all as specified and directed.
Supply & Fix butt hinges, 75mm size medium weight cold rolled mild steel complete all as specified and directed.
Supply & Fix aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.
Supply & Fix aluminium handles cast type anodised 125 mm size complete all as specified and directed.
Supply & Fix aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
Supply & Fix steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
Supply & Fix Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.
Supply & Fix stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply & Fix sheet glass 4mm thick plain ordinary quality and glazing with oil putty/wooden beads as directed in squares n.exc 0.50 sqm each pane complete all as specified and directed.
Supply & Fix 4mm tick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50Sqm in each pane complete all as specified and directed.
Material & Labour for applying two coats of synthetic enamel paint for wooden surfaces over a coat of pink primer including necessary preparation of new wooden surfaces of any description exc10cm width or girth complete all as specified and directed.
Material & Labour for applying two coats of synthetic enamel paint on steel/iron surfaces over a coat of red oxide primer including preparation of surfaces of any description over 10cm width or girth complete all as specified and directed.
Material & Labour for applying two coats of synthetic enamel paint on steel/iron surfaces including preparation of old surfaces of any description over 10cm width or girth complete all as specified and directed.
Supply & Fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening complete all as specified and directed.
Supply & Fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed.
Material & Labour for rendering 20 mm thick in cement mortar 1:3 mixed with integrated water proofing compound as per manufacturer instruction as in base course to APP membrane complete all as specified and directed. (Note : WPC Compound paid separately).
Material & Labour for water proofing treatment with polymeric standard water proofing membrane 3mm thick and weighing not less than 3.0 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen - based prefabricated layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87 to 0.89 kg/litre and viscosity 70 to160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary preparation of surface complete as per manufacturers instructions.finally painted with a coat of bituminous aluminium paint @ 100gms/sqm over bituminous coat complete all as specified and directed.
Material & Labour for concrete bed PCC 1:4:8, type D2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm dia NP2 pipes complete all as specified and directed.
Material & Labour for RCC pipes, 150mm dia, class NP2, laid in trenches and jointed in cement mortar 1:2 with collars complete all as specified and directed.
Material & Labour for PCC 1:3:6, type C1 (using 20mm graded stone aggregate) as in coping including necessary formwork complete all as specified and directed.
Material & Labour for rendering 15mm thick in two layers in CM 1:4 on brick wall or concrete surfaces finished even and smooth without using extra cement with 3% of WPC of weight of cement complete all as specified and directed. (Note - WPC shall be measured and paid separately)
Material & Labour for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
Material & Labour for precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in precast cover slabs set and jointed in CM 1:4 complete all as specified and direected.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred / stopped end etc complete all a specified and directed.
Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. Converting window into door openings, etc or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish removal not exc. 50mtr in cement mortar or cement lime mortar complete all as specified and directed
Forming jambs, etc to openings (to forgoing item, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cement mortar 1:4 or cement lime mortar 1:2:9 complete all as specified and directed
Making good under cills or over arches, lintels and bressumers including under pinning when necessary in cement mortar 1:4 or cement lime mortar 1:2:9 complete all as specified and directed
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed
Supply and fixing factory made UPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (whitepowder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP)Wire mesh door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete all as specified by the manufacturer and as per directions of Engineer- in-charge.
Excavation over areas n.exc 1.50 mtr depth for foundation,etc getting out in hard/dense soil including taking down interlocking/cement concrete tiles complete all as specified and directed.
Removing excavated material/soils to a distance exc. 50 mtrs and not exc. 250 mtrs, depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and as directed.
Material & labourfor broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.
Material & Labour for providing cement concrete 1:4:8 type C2, (40 mm graded stone aggregate)100 mm thick as in sub base finished even and fair to receive top layer complete all as specified and directed.
Material & Labour for 80mm thick coloured Pre-Polished machine pressed interlocking rubburised and glossy finish paver block any shape and size conforming to IS 15658-2006 of M-40 Grade laid complete all as specified and directed by Engineer-in Charge.
Excavation by means (Hydraulic excavtor) over area incl getting out & disposal of excavated material n.exc 1.5mtr deep and getting out in hard / desnse soil & disposal of excavated earth upto a lead of 50 mtr and lift of 1.5 mtr complete all as specified and directed.
Material & labour for plain cement concrete type 1:4:8 D-2 using 40 mm graded stone aggregate as in foundations complete all as specified and directed.
Material & labour for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed
Material & labour for providing plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in plinth courses, string courses, lacing courses, copings, kneelers, apex stones, bed plates, and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed.
Material & labour for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheated FRLS cable 1100 Volts drawn in to and including concealed PVC conduit of suitable dia minimum 20mm dia includings sunken to wall including its accessories such as tee, bend ,elbow, socket and chisselling on wall complete and also making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire and modular box including cover plate of suitable size for housing modular switch, socket, regulators etc complete all as specified and directed by Engineer in charge for the following:-
(a) One light point controlled by one switch
(b) One Fan point controlled by one switch
(b) One Exhaust fan point controlled by one switch
(c) One 3 pin 5 Amps socket outlet on independent board.
(d) One 5 Amp socket outlet on same board with other switches
All as per item No 103 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor FRLS 1100 v grade but sheathed single core multi stranded pvc insulated unsheathed copper conductor cable 1100 volts grade for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire complete all as specified and directed
All as per item No 103 here-in-before but wiring with 4.0 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated but unsheheted single core multi stranded PVC insulated unsheathed copper conductor FRLS cable 1100 volts grade for 16 Amps power point on independent board and 4.0 sqmm cable as earth wire complete all as specified and directed
Supply & fix Modular Switch 1 one way 6 amp 1 module complete ISI mark complete all as specified and directed by Engineer in charge.
Supply & fix Modular Switch 16 Amps Modular one Way , 1 module complete all as directed by Engineer in charge.
Supply & fix Modular socket 6A 2/3 pin combined 2 module, complete all as directed by Engineer in charge.
Supply & fix Modular socket 16A 2/3 pin combined 2 module, complete all as directed by Engineer in charge.
Supply & fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer in charge.
Supply & fix PVC ceiling rose surface type three terminals type complete all as specified and directed by Engineer in charge.
Supply and fixing LED lights fitting 1x20W , 220V AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer in charge.
Supply and fixing LED security light fitting 35 watt 230 V AC outdoor type with high, pressure die cast alluminium hosing and heat resistant complete with driver, lamp, GI bend braket 1 meter length suitable for fitting cavati for mounting on buildings with all acessaries with impact and corresion resistant including thermal management in multiple optics complete wtih IP 65/66 protection complete all as directed by Engineer in charge
Supply & fix sheet metal enclosure MCB SPN DB 8 Way with 200 Amps rated copper bus bar 240 volts 50 Hz AC Supply Double door with magnetic locking system complete all as specified and as directed.
Supply & fix MCB SPN 6 to 32 Amps C curve 10 kA 240 Volts AC Supply complete all as specified and directed
Supply & fix MCB SP 6 to 32 amps, C curve 10 kA 240 Volts AC Supply complete all as specified and directed
Supply & fix Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed by Engineer in charge.
Supply & fix ceiling fan, complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed
Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300 m sweep with, blades, and frame and louvers complete ISI mark complete all as specified and directed by Engineer in charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and directed
Excavation in trenches for taking out/laying of cable and pipe line not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide in soft/loose and hard dense soil complete and all as specified the following.
a) soft and loose soil
b) Hard dense soil
Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed
Material & labour for sand cusoning of under ground cable laying in trenches complete all as specified and directed
Material & labour for old size brick Class 'B' protection for Under ground cable complete all as specified and directed
Supply and laying GI tubing light grade 50mm bore, ISI marked, for cable protection complete all as specified and directed
Material & labour for road cutting and boring of road without damaging surface and inserts GI pipe and cable without any damage complete all as directed by Engineer in charge.
Supply and fixing Electric Storage water heater, storage type steel body with copper inner tank and heating element up to 2KV of capacity 25 Ltrs of Five star rating, AC 230 Volts complete with all necessary standard accessories such as safety valve , thermostat, NRV , flexi connection pipes of 450 mm size, glass line tank and four numbers nut bolts duly groutted on walls complete all as specified and directed by Engineer in charge.
Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete all as specified and directed.
Supply & fix sheet metal enclosure MCB SPN DB 4 Way with 200 Amps rated copper bus bar 240 volts 50 Hz AC Supply Double door with magnetic locking system complete all as specified and as directed.
Material & labour for sub main wiring with two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into and including PVC conduit of size 25 mm dia including 4 sqmm PVC multi standard copper conductor FRLS cable in green colour for contineous earthing complete all as directed by Engineer in charge. Note: Two core cable and earth wire and conduit shall be measured as one length.
Supply & fix in repairs wall mounted LED light fitting inverter type extruded Polycarbonate/ aluminium housing high quality indoor batten LED tube light 20 watt colour temperature 4000 K (4' long) lumen 1700 to 2000, PF> 0.90, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement complete all as directed by Engineer in charge. Note:- Indoor LED batten inverter tubelight 4' long will be fixed on and including two PVC square boxes properly.
Material and labour riddle earth cushning for underground cable in trenches including spreading, levelling and well ramming complete all as specified and directed.
Supply and laying un-rinforced precast concrete cable cover ,class LV,Type 1,flat of size 250 mm x150 mm x40 mm all as specified and directed.
Supply & lay pipes galvanised "Medium class" size 25 mm (1") bore supplied and laid complete including fitting complete all as specified and directed
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed
Supply and Fixing Gun- Metal, Globe or Gate Valves with iron wheel head, screwed both ends for iron pipe 25 mm bore as per requirement of the site complete all as specified and directed.
Cutting, Drilling and tapping existing PPR/ DI pipe of 63 to 150 mm dia for insertion of elbow, bend, socket, tees, reducers, branch connection bore in pipes of 25 mm as per requirement of the site complete all as specified and directed.
ShreHari Civil Enginneering and Contractors (BID ID -3446216)
M/S SUGAM CONSTRUCTION (BID ID -3446716)
SAMBHAJI D JARANDE (BID ID -3446659)
S V CONSTRUCTION (BID ID -3446285)
M/S SANDEEP CONSTRUCTION COMPANY (BID ID -3446398)
Sunrise Traders (BID ID -3446347)
A B S ENTERPRISES (BID ID -3446849)
BHARDWAJ ENTERPRISES (BID ID -3446243)
BHABA CONSTRUCTION (BID ID -3446528)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .