REPAIR/MAINT OF INTERNAL WIRING AND REPLACEMENT OF OLD LIGHTS WITH LED TUBE LIGHTS, CEILING LIGHTS AND CONNECTED REPAIRS IN A PARK, B PARK, OLD PARK AND MISC BUILDING OF CAFVD UNDER AGE E/M-II IN GE (CENTRAL) KHADKI.

Amount

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit including making good the disturbed wall and painting the same with matching to existing wall complete all as specified and as directed.

Material and labour for point wiring in casing & caping of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover all as specified and directed by Engineer in charge.for the following:-

Description all as per item No 2 above for point wiring for light/fan/exhaust fan point controlled by one switch.

Description all as per item No 2 above for point wiring for bell/buzzer point controlled by one bell push.

Description all as per item No 2 above for point wiring for 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.

Description all as per item No 2 above for point wiring for 5 pin switch socket outlet 5 Amps on same board controlled by one switch.

Material and labour for point wiring in PVC conduit of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover all as specified and directed by Engineer in charge. for the following :-

Description all as per item No 7 above for light / fan/exhaust fan point controlled by one switch.

Description all as per item No 7 above for 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.

Description all as per item No 7 above for 5 pin switch socket outlet 5 Amps on same board controlled by one switch.

Material and labour for point wiring in steel conduit with all steel enamelled fittings such as elbow bends, junction boxes, supporting clamps for proper hanging arragements made out from 20x1mm flat aluminium patti including nuts, bolts and bending to shape etc. of appropriate size but not less than 20mm on surface with two run of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 Sqmm nominal cross sectional area 1100 volts grade and including one run of 1.5 sqmm (green colour) PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire incl. suitable size sunken type Galvanised pressed sheet steel 1.6 mm thick terminal box of suitable size with 3 mm thick laminated hylum sheet for mounting switches, sockets etc. all as specified and directed. for the following :-

Description all as per item No 11 above for light/fan/exhaust fan point controlled by one switch.

Description all as per item No 11 above for 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.

Description all as per Srl item No 11 above for 5 pin switch socket outlet 5 Amps on same board controlled by one switch.

Material and labour for point wiring complete as specified with 1100 V grade 4 Sqmm single core PVC insulated unsheathed multistranded copper conductor cable FR grade, conforming to relevant IS drawn through and including PVC casing and caping with all accessories fixed on surfaces of wall, ceiling, incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover including 4 Sqmm single core PVC insulated and unsheathed copper conductor cable FR grade as earth continuity wire connected to common earth and earth dolly including testing complete all as specified and directed by Engr-in-Charge for one 6 pin switch socket outlet 15 Amps/AC Point on independent board controlled by one switch.

Description all as per item No 15 above but in steel conduit for one 6 pin switch socket outlet 15 Amps/AC Point on independent board controlled by one switch.

Description all as per item No 15 above but in PVC conduit for one 6 pin switch socket outlet 15 Amps/AC Point on independent board controlled by one switch.

Supply and fix switch piano flush type single pole, one way 5 Amp.

Supplying & fixing, 5 Amps, Bell push , flush type , 230 volts AC circuit complete all as specified and directed.

Supply and fix switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal.

Supply and fix switch socket combination 2 in 1, 3 pin, 5 & 15 Amp flush type universal.

Supply and fixing ceiling rose PVC/polycarbonate, isolated body, three terminals, complete all as specified and directed .

Supply and fixing in replacement stepped type electronic fan regulator flush type suitable for ceiling fans, prewired 230 volts AC 50Hz supply 100Watt complete all as specified and directed.

Supply and fix bell ding dong AC, 230 volts, single pole.

Dismantling and taking out old unserviceable copper/aluminium sub main wiring/Unarmoured cable (used as Sub main wiring) from any height of any Size and Core with all connecting accessories incld. conduit or casing caping and incld. making good to the disturbed wall and painting the same with matching paint as of existing wall including material all as specified and directed by Engineer in charge.

Material & Labour for Sub main wiring at any height with 2 single core PVC insulated, multi stranded copper conductor cable (FRLSH), unsheathed, 2.5 sqmm, 1100 volt grade conforming to IS drawn through and including New 20 mm PVC conduit and including one single core PVC insulated multi stranded unsheathed copper conductor cable, 2.5 sqmm,, FRLSH green in colour as continuous earth wire including all accessories and fixing arrengements, supporting clamps, bends, sockets and connecting items etc. all as specified and directed.

Description all as per Srl item No 26 above but drawn through and including casing & capping

Material and labour for sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type, 4.0 Sqmm, 1100 volts grade, drawn through and including New PVC conduit 20 mm dia including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 4.0 sqmm, 1100 Volts grade,,green in colour as earth contuinity wire all as specified and directed by Engineer in charge.

Description all as per Srl item No 28 above but drawn through and including casing & capping

Material and labour for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type, 6.0 Sqmm, 1100 volts grade, drawn through and including New PVC conduit 20 mm dia connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 6.0 sqmm, 1100 Volts grade, green in colour as earth contuinity wire all as specified and directed by Engineer in charge.

Description all as per item No 30 above but drawn through and including casing & capping

Material and labour for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type,10.0 Sqmm, 1100 volts grade, drawn through and including New PVC conduit 20 mm dia connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type,10.0 sqmm, 1100 Volts grade,,green in colour as earth contuinity wire all as specified and directed by Engineer in charge.

Description all as per item No 32 above but drawn through and including casing & capping Note for item No 26 to 33 :- Two runs of cable one run of earth wire and one run of conduit /cassing caping shall be measured as one unit /length

Dismantling and drawing out old unserviceable Sub Main Aluminium/copper wiring from Existing Steel/PVC Conduit of any size and any type from any height with all connecting accessaries (excluding conduit or casing caping) and making good the disturbed wall and painting the same with matching to existing wall including material all as specified and directed by Engineer in charge.

Material and labour sub main wiring at any height including using two single core PVC insulated copper conductor cable (FRLSH) of size 1.5 sqmm 1100 volt grade conforming to IS drawn through existing Steel/ PVC conduit including one single core 1.5 sqmm. PVC multi stranded copper conductor cable (FRLSH) green in colour for continuous earthing all as specified and directed.

Material and labour sub main wiring at any height including using two single core PVC insulated copper conductor cable (FRLSH) of size 2.5 sqmm 1100 volt grade conforming to IS drawn through existing Steel/ PVC conduit including one single core 2.5 sqmm. PVC multi stranded copper conductor cable (FRLSH) green in colour for continuous earthing all as specified and directed.

Material and labour for sub main wiring at any height with four single core PVC insulated copper conductor cable (FRLSH) of size 6 sqmm 1100 volt grade conforming to IS drawn through Existing Steel / PVC conduit including two single core 6.0 sqmm PVC multi stranded copper conductor cable (FRLSH) green in colour for continuous earthing all as specified and directed. (Note for item No 35 to 37) - (a). Two/Four runs of wiring cable and One/two runs of earth continuity wire shall be measured as one length/unit.

Disconnecting and taking down old distribution Box with MCB/fuse grip TPN/SPN DB 2 Way to 12 Way old type DB including taking out all cable connections of any description and in any position and making good the disturbed surface of walls, to match with the existing surfaces complete all as specified and directed by Engineer in charge.

Supply and fix connecting & testing of VTPN DB of 12 way suitable for MCCB up to 160A as a incomer & SP / TP MCB as a outgoings with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damage like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 36kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed. MAKE :- Legrand Cat.No. 5077 48 or equivalent in Schneider- Acti-9/ L&T-Exora. NOTE :- MCCB , MCB will be measured and paid separately under relevant item of this schedule.

Supply and fix connecting & testing of VTPN DB of 8 way suitable for MCCB up to 160A as a incomer & SP / TP MCB as a outgoings with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 36kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed. MAKE :- Legrand Cat.No. 5077 47 or equivalent in Schneider- Acti-9/ L&T-Exora. NOTE :- MCCB , MCB will be measured and paid separately under relevant item of this schedule.

Supply and fix connecting & testing of VTPN DB of 4 way suitable for MCCB up to 160A as a incomer & SP / TP MCB as a outgoings with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 36kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed. MAKE :- Legrand Cat.No. 5077 45 or equivalent in Schneider- Acti-9/ L&T-Exora. NOTE :- MCCB , MCB will be measured and paid separately under relevant item of this schedule.

Supply and fix connecting & testing SPN DBs of 8 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 10kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties complete all as specified and directed. MAKE :- Legrand Cat.No. 5076 11 orequivalent in Schneider/L&T.

Supply and fix connecting & testing SPN DBs of 12 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 10kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties complete all as specified and directed. MAKE :- Legrand Cat.No. 5076 12 or equivalent in Schneider/L&T.

Supply and fix connecting & testing SPN DBs of 4 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 10kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties complete all as specified & directed. MAKE :- Legrand Cat.No. 5076 11 equivalent in Schneider/L&T.

Supply and fix thermal magnetic adjustable MCCB 160 Amps 4 pole with breaking capacity 16 KA & shall be Ics=Icu 100%, complete all as specified and directed MAKE :- Legrand-DPX3 cat No 4200 17 / Schneider-NSX/L&T

Supply and fix thermal magnetic adjustable MCCB 100 Amps 4 pole with breaking capacity 16 KA & shall be Ics=Icu 100%, complete all as specified and directed. MAKE :- Legrand-DPX3 cat No 4200 15 / Schneider-NSX/L&T

Supply and fix thermal magnetic adjustable MCCB 63 Amps 4 pole with breaking capacity 16 KA & shall be Ics=Icu 100%, complete all as specified and directed. MAKE :- Legrand-DPX3 cat No 4200 13/ Schneider-NSX/L&T

Supplying and fixing MCB 40 to 63 Amps, TPN "C" curve 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed. MAKE :- Legrand/ABB/L&T/ Seimens.

Supplying & fixing MCB 40 to 63 Amps, TP "C" curve 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed. MAKE :- Legrand/ABB/L&T/ Seimens.

Supplying & fixing MCB 6 to 32 Amps, single pole and neutral, "C" curve 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed. MAKE :- Legrand/ABB/L&T/ Seimens.

Supplying and fixing MCB 6 to 32 Amps, single pole, 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, complete all as specified and directed. MAKE :- Legrand/ABB/L&T/ Seimens.

Supply, fixing, connecting and testing in replacement Industrial Earth Plug & socket with sheet metal enclosure of IP44 rating electric driven single phase including MCB 'C' series SP 20 Amps and supplied with neutral links complete all as specified and directed.

Supply, fixing, connecting and testing in replacement Industrial Earth Plug & socket with sheet metal enclosure of IP44 rating electric driven three phase including MCB 'C' series TP 20 Amps and supplied with neutral links complete all as specified and directed.

Dismantling and taking down unserviceable light fitting any type from any location/height after disconnecting of electrical connection complete including all connected accessories all as directed by Engr-in-Charge.

Supply & fixing, LED tube light fitting suitable for and including 1x20 W 4 feet long tube with polycarbonate diffuser complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable of suitable size & all accessories for fixing on steel trusses / false / normal ceiling complete all as specified and as directed. MAKE :- Crompton Cat part No-Bright Linea CCS-100-20-65-HL2-DP-NWH or technically and commercialy equivalent in Wipro/Havells

Supply & fixing, CRCA housing box LED Type luminiare suitable for and including 2x20 W 4 feet long complete including tube rod & connecting up to ceiling rose with twin core twisted flexible copper conductor cable of suitable size & all accessories for fixing on steel trusses / false / normal ceiling complete all as specified and as directed. MAKE :- Crompton cat part No IS 340 NWH or equivalent in Havells/Wipro

Supply & fixing, 36W 2X2 LED recessed mounting light fitting complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable of suitable size & all accessories for fixing on steel trusses / false / normal ceiling complete all as specified and as directed. MAKE :- Crompton Cat Part no-Polaris Nio-I LCTLRNE-36-FO-CDL or technically and commercialy equivalent in Wipro/Havells

Supply & fixing, 36W 2X2 LED Surface mounting light fitting complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling complete all as specified and as directed. MAKE :- Crompton Cat Part No-Polaris Nio-III LCTLSNE-36-FO-CDL or technically and commercialy equivalent in Wipro/Havells

Supply & fixing, 1X18W,4 Feet LED Ceiling suspended light fitting complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling complete all as specified & directed. MAKE :- Crompton Cat Part No - Vogue line CCP-121-18-WW/TL/CDL-SL-NWH or technically and commercialy equivalent in Wipro/Havells

Supply and fixing, 20W double End LED Tube rod including connecting up in existing normal/flameproof fitting & make batten functional complete with all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. MAKE :- Crompton Cat Part No- Ultron LT8-20-865(2) or or technically and commercialy equivalent in Wipro/Havells

Supply and fixing at 5 to 9 mtr height-100W Industrial LED Highbay luminaire with > 100 Lm/W, with complete all accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt complete all as specified and directed by Engineer-in-Charge. MAKE :- Surya Cat Part No SLE HB 100W COMET NEO-N or equivalent in Cromton Greaves NOTE :- The quoted rates are deemed to be included the cost of Nut-bolts washars or clamps required to be replaced if old one are found unserviceable.

Supply and fixing at 5 to 9 mtr height-150W Industrial LED Highbay luminaire with > 100 Lm/W, with complete all accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt complete all as specified and directed by Engineer-in-Charge. MAKE :- Surya Cat Part No SLE HB 150W COMET NEO-N or equivalent in Cromton Greaves NOTE :- The quoted rates are deemed to be included the cost of Nut-bolts washars or clamps required to be replaced if old one are found unserviceable.

Supply and fixing lamp holder, PVC/Polycarbonate type with black plate suitable for batten fittings etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and testing complete all as specified and directed by Engr-in-charge.

Supply and fixing LED 18W Bulb complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge. MAKE :- Philips or Equivalent in Bajaj/Havells.

Supply and fix modular switch one way 6 Amp 1 module. MAKE :- Anchor/Crabtree/Havells

Supply and fix modular white cover plate with frame ,3 module. MAKE :- Anchor/Crabtree/Havells

Supply and fix modular white cover plate with frame ,6 module. MAKE :- Anchor/Crabtree/Havells

Supply and fix modular white cover plate with frame ,8 module. MAKE :- Anchor/Crabtree/Havells

Supply and fix metal flush box 3 module. MAKE :- Anchor/Crabtree/Havells

Supply and fix metal flush box 6 module. MAKE :-:Anchor/Crabtree/Havells

Supply and fix metal flush box 8 module. MAKE :- Anchor/Crabtree/Havells

Supply and fix modular switch one way 16 Amp 1 module. MAKE :- Anchor/Crabtree/Havells

Supply and fix modular socket , 6 A -2/3 pin combined 2 module. MAKE :- Anchor/Crabtree/Havells

Supply and fix modular socket , 15 A -2/3 pin combined 2 module. MAKE :- Anchor/Crabtree/Havells

Supply and fix modular fan step regulator 120 W-2 module

Supply and fix sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with and including one single pole MCB 20 Amps, 240 Volts complete all as specified and directed.

Material and labour for earthing complete with hot dip galvanized steel pipe in pipe electrode, outer pipe 88mm dia medium grade and inner pipe 55 mm dia including testing, 3 mtr long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm holes for nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolits and connected to test point from earthing pit. The electrode pipes should be filled with 2x 25 kg bags of carbon based earthing compound. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between7-9. Connected to the earthing test point, Fiber reinforced plastic pit not less than 300x300 mm with pit cover, including necessary returning filling & removal of extra soil , to achieve earth resistance value less than 5 Oms including testing complete all as specified and directed. MAKE :- U-Protect or equivalent NOTE :- If the desired result not obtained after testing the contractor should do re-eathing without any extra cost.

T.H.ASSOCIATES (BID ID -3070927)

SKS Electricals (BID ID -3070409)

JP ENTERPRISES (BID ID -3070656)

M/S. Niksun Electro-Infra Private Limited (BID ID -3070213)

Om Construction (BID ID -3070369)