Supply fabrication and painting of miscellaneous material and equipment for Common Facility Building Hall 9 10 11 at North Site BARC Trombay Mumbai 400085

Amount

Supply, fabrication and installation of MS structural steel in form of Angle, Channel, I beam, sheet, rod, chequred plate, pipe etc. as per site requirement used for various services as per TSS No. 01 of technical specification.

Supply and providing SS 304 net over well of 6 mt dia. with GI structural arrangement as per TSS no. 02 of technical Specification.

Supply, fabrication and installation of prepainted corrugated roofing sheet of minimum 1.0 mm thick as per TSS no. 03 of technical Specification.

Supply and installation of Saddle type PUF pipe support (half square) from bottom and top side block of 100 kg/ mt2 (+- 5%) of following size in existing insulated pipe line as per site requirement and as per TSS no. 04 of technical Specification.

Pipe size: 50 mm NB

Pipe size: 65 mm NB

Pipe size: 80 mm NB

Pipe size: 100 mm NB

Pipe size: 125 mm NB

Pipe size: 150 mm NB

Supply and installation of SS nut, bolt, studs, washer etc. as per requirement, as per TSS No. 5.0. of technical specification.

Supply and applying Painting over Pipes, MS structure, equipment etc. as per as per TSS no. 6.0. of technical Specification and as directed by the E-I-C.

Supply and applying two coats of synthetic enamel paint of reputed make over existing insulated piping to give an even shade as per specifications and as directed by the E-I-C.

Supply and applying of two coat of red oxide primer of reputed make over existing steel surface i.e. uninsulated MS/ GI pipe and MS structural material to give an even shade as per specifications and as directed by the E-I-C.

Supply and applying of two coats of synthetic enamel paint of approved brand over existing uninsulated MS pipe & MS structural material and to give an even shade as per specifications and as directed by the E-I-C.

Providing and Painting with Epoxy PU paint using 2 coats of (120 Micron dry film thickness) Epoxy PU high build coating as finishing coat over a priming coat of EPILUX-13 High Build primer of 50 micron thickness over steel surfaces as per specifications and as directed by the E-I-C.

Removal and shifting of scrape materials e.g. PVC fills, PVC drift eliminator etc. from CFB site to outside BARC. Please refer TSS No. 7.0. of technical specification for detailed scope of work.

Supply and repair of damaged sand cement plaster over existing thermocole insulated pipe and even finish to existing pipeline. Please refer TSS No. 8.0. of technical specification for detailed scope of work.

PCC pedestal using 1:2:4 PCC for AHU base and other places, wherever required as instructed by EIC. Please refer TSS No. 9.0. of technical specification for detailed scope of work.

Fabrication, supply & installation of 0.6 mm thick aluminium sheet cladding over 38 mm thick closed cell rubber insulated chilled water piping. Please refer TSS no. 10.0. of tender specifications for detailed scope of work.

Fabrication, supply & installation of tubular transparent level Indicators equipped with glass tubes with SS metallic frame of approx. 2 mt length along with isolation valves with suitable supporting arrangement for fixing it in a FRP tank. Please refer TSS no. 11.0. of tender specifications for detailed scope of work.