Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹18.5 L+₹2.8 L (17.6%)Rejected-Finance 306 SHIV BARI MARG PANCHVATI NAGAR BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹20.0 L+₹4.3 L (27.0%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹25.3 L+₹9.6 L (60.8%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
14 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHISIANA
GE (AF) BHISIANA PIN-151201
As Per BOQ/Price Schedule
2022_MES_562963_1
GE/BHI/T-23(a)/2022-23
Open Tender
Civil Works
Item Rate
273 days
GE (AF) BHISIANA
As per NIT/Tender Documents
6 documents required · 6 mandatory
₹500
GE (AF) BHISIANA
₹60,000
23 Jan 2023
14 Nov 2022
16 Dec 2022
14 Nov 2022
14 Dec 2022
29 Nov 2022
14 Nov 2022 - 22 Nov 2022
Amount
Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete wall surfaces and finishing the surface even and fair and Preparation of new plastered wall surface and applying two coat of cement base paint over one coat of primer complete all as specified and as directed.
M&L for 12mm thick cement plaster in CM (1:6) on fair faces of brick or concrete wall surfaces and finishing the surface even and fair and Preparation of new plastered wall surface and applying two coat of oil bound distemper over one coat of primer complete all as specified and directed.
M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete wall surfaces and finishing the surface even and fair and Preparation of new plastered wall surface and applying three coat of white wash complete all as specified and directed.
M&L for 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces in ceiling and finishing the surface even and smooth (without using extra cement) etc including applying three coats of white wash and after preparation of plastered surfaces complete all as specified and directed.
M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.
Dismantling Stone slabs and tiles of any description or thickness laid bedded & pointed in any mortar in floors/walls, aprons incl removing from site complete all as specified.
M&L for 20-25 mm thick kota stone floor tiles machine cut (square/recatangular) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed n CM (1:6) as in screed bed or bedding and demolition of existing floor finishes complete as all specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified.
M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. including 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match copmplete. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7 mm / 450x300x7mm thick including 10mm thick cement plaster in CM 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match complete. NOTE : Cost of Rendering shall deem to be include in the Quoted Unit Rate.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:3 to receive vertical tiles complete all as specified. NOTE : Cost of Rendering shall deem to be include in the Quoted Unit Rate.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:3 to receive vertical tiles complete all as specified. NOTE : Cost of Rendering shall deem to be include in the Quoted Unit Rate.
M&L for 12-15mm thick green marble slab flooring including 15mm thick screed bed in Cement Mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab one side bullnosed including dismentling existing slab/stone etc complete. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L for 12-15mm thick green marble including 10mm thick cement plaster in Cement Moratr 1:3 in riser of steps, skirting , dado and pillar with one side bullnosed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including dismantling of existing stone etc complete. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L for Cement Concrete 1:3:6, type C-1 (20mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide upto total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and as directed.
M&L for Cement Concrete 1:4:8, type D-2 (40mm graded stone aggregate) 75mm thick as in Fillings, Sub-base to Floors, etc. complete all as specified and as directed.
M&L for Coloured Chequred cement concrete tiles 20cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block glossy finish any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement with pigment complete all as specified and directed.
M&L Sand Filling under Floors or in Foundations of 25mm thick for laying interlocking tiles including Watering and Consolidation, complete all as specified and as directed.
Taking down Old Unserviceable PVC Frame & Chowkhat (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.
M&l for kota stone floor tiles 20-25 mm thick, machine cut (square/recatangular) as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick cement plaster in CM (1:4)for receiving tile to wall complete as all specified and directed by Engr-in-Charge.
M&L for fixing of granite 18-20mm thick of any type ( table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like in cement mortar 1:4 incl pointing in white cement complete all as specified and directed.
Taking down Shutter of any description exc 1.00 Square Metre and not exc. 2.00 Square Metre Each and Refixing in the Same Opening, after resecuring or easing and adjusting, etc., complete all as specified and as directed.
M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor topping of hard standing/floor finished even and smooth without using extra cement (PCC shall be laid in alternate bays in panels of size complete all as specified and ditected.
Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed.
S&F for Rolled mild steel in Rolled sections as in main and cross beams, hip and jack rafters: purlins where connected to common rafters and running rails and guides for sliding doors: fixed with angle cleats or other connecting plate complete all as specified and directed.
S&F Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.
S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain Colour (Ivory Shade) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails of Mild Steel Frame shall be covered with Heat Moulded Wood Grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width Stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood Grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles & Rails with suitable 5.0mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mmx10mm (90°) and jointed together with Solvent Cement and fixing in the Frame at Site, complete all as specified and as directed.
S&F Stainless Steel Butt Hinge 100mm long (weight not less than 90 Gram) and fixed, complete all as specified and as directed.
S&F Stainless Steel Handle 100mm long (weight not less than 60 Gram), Cast type, anodised, complete all as specified and as directed.
S&F Stainless Steel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed.
Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.
Fixing old Steel Tubing 15mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 36 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required/ordered at Sites), complete all as specified and as directed.
Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.
Fixing ony old Steel Tubing 20mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 39 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required/ordered at Sites), complete all as specified and as directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified.
Dismantling water tanks exc 250 ltr and not exc 500 ltr and removing to store/ Schedule of Credit complete all as specified and directed.
M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule , complete all as specified and as directed.
Dismantling water tanks exc 500 ltr and not exc 1000 ltr and removing to store/ Schedule of Credit complete all as specified and directed.
M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule, complete all as specified and as directed.
S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe , complete all as specified and as directed.
S&F in repair Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe, complete all as specified and as directed.
S&F in repair Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe , complete all as specified and as directed.
Dismantling wall & ceiling board any type along with Snap grid , any thickness including cover fillets complete all as specified & directed.
M&L for Non asbestos fibre cement boards 600x600x4mm thick fixed in ceiling Aluminium frame work with screws complete all as specfied.
S&F Anodised aluminium snap grid frame work of grid 605x605mm for false ceiling all as specified
S&F in repairs Cast Iron (Sand Cast) 75mm bore (dia) Soil, Waste and Ventilating Pipe, in any length with Cement Joints, with or without Ears, Fixed to Walls/ Floors , complete all as specified and as directed.
S&F in repairs Cast Iron (Sand Cast) 110mm bore (dia) Soil, Waste and Ventilating Pipe, in any length with Cement Joints, with or without Ears, Fixed to Walls/ Floors , complete all as specified and as directed.
S&F in repairs 75 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door, complete all as specified and as directed.
S&F in repairs100mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door , complete all as specified and as directed.
S&F in repairs 75 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door , complete all as specified and as directed.
S&F in repairs 100 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door , complete all as specified and as directed.
S&F in repairs 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.
Dismantling Plain or Corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete.
S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc
S&F for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F in repairs PVC 100 mm bore Traps 'P' or 'S' any radius etc. jointing with Solvent Cement , complete all as specified and as directed.
S&F in repairs Vitreous China White Squatting Pan of size 580x440mm, 'Orissa' Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces, complete all as specified and as directed.
S&F in repair Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces , complete all as specified and as directed.
S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia and make a proper connection with water closet and low level cistern with leak proof and fixed in repair, complete all as specified and as directed.
S&F in repairs PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.
S&F in repairs Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back) with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3
S&F in repairs Pillar Tap 15mm bore (dia), Cast Copper Alloy with Capstan Heads, Chromium Plated, screwed down high pressure, with Long screwed Shanks and Fly-nuts, screwed for Iron Pipe , complete all as specified and as directed.
S&F in repairs 15 mm bore Stop Valve fancy type chromium plated with long shank and cup (concealed type),cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and as directed.
M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
S&F in repairs PVC Connection Pipe 15mm size and 45 Cm in length with Adopter Nuts of PVC, complete all as specified and as directed.
S&F in repairs Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (one Pair) , complete all as specified and as directed.
S&F in repair Bib Tap 15mm bore (dia), Cast Copper alloy, Fancy type Chromium Plated with Crutch or Butterfly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Chromium Plated Wall Flange, complete all as specified and as directed.
S&F in repair Chromium Plated Shower Rose with Shower Arm 100mm, Swival Joint including fixing to Steel Pipe , complete all as specified and as directed.
S&F in repairs Mild Steel curtain rod 20mm dia PVC coated with fixing brackets and ends cap (latoo) complete all as specified and directed.
M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in 1:4 cement mortar complete.
S&F in repairs Sink with Drainage Board made of Stainless Steel l.0mm thick Kitchen or Laboratory Overall size 495x420mm having Bowl size 410x330x160mm with Plugs, Washers and Wastes, etc. including bedding in Cement Mortar to dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe , complete all as specified and as directed.
Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.
M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls , complete all as specified and as directed.
S&F in repair PVC (SWR) Bend 110mm bore (dia), any radius etc. jointing with Solvent Cement , complete all as specified and as directed.
S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls, complete all as specified and as directed.
S&F in repair PVC (SWR) Bend 75mm bore (dia), any radius etc. jointing with Solvent Cement , complete all as specified and as directed.
M/s Luxmi Constructions
SIDHU CONSTRUCTIONS
REYANSH GARG AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .