Renovation of toilet blocks of the Design department in Academic Complex

Amount

Part-A: Civil Works

Dismantling tile work in floors/ walls and roofs laid in cement mortar including stacking material within the campus as directed by Engineer in Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (a) In cement mortar

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within the campus as per direction of Engineer - in- charge.

Water proofing treatment for sunken slab in toilets

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying in position cement concrete of specified grade Excluding the cost of centering and shuttering

1:5:10 (1 cement : 5 coarse sand (zone-ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade Excluding the cost of centering and shuttering

1:2:4 (1 cement : 2 coarse sand (zone-ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and applying Tilegrout of approved brand for grouting of the tile joints, as per manufacturers specification, including cost of materials, labour, consumables, tools and tackles etc., complete.

Water proofing for Toilet walls

Providing and laying water proofing treatment in walls by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Step-4 15 mm thick plastering with cement mortar 1:4 (1 cement: 4 fine aggregate) over the water proofing treatment area admixed with Acrylic Polymer@ 10% by weight of cement.

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

(a) Suspended floors, roofs, landings, balconies and access platform

(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers

(c) Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement for all height

(a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (a) Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Providing 12 mm thick cement plaster in proportion 1: 4 (1 Cement: 4 Coarse sand)

Providing 15 mm thick cement plaster in proportion 1: 4 (1 Cement: 4 Coarse sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

(a) Granite work

Providing and laying matt finish Ceramic glazed floor tiles of size 600x600 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Frame size 50 x 125 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

30 mm thick

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)r dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :

(a) 100X60X1.90 mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :

(a) Two or more coats on new work

Applying priming coat with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Part-B - Sanitary & Water supply

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type Single Piece W.C.) with Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting and Fixing Accessories complete including cutting and making good the walls and floors wherever required :(Make : Model SLS-WHT-6851P180PP of Jaquar or equivalent)

Providing and fixing white vitreous china wash basin ( oval shape counter top) of size: 605x430x200 mm, including making all connections but excluding the cost of fittings: (Make: Model CNS-WHT-705 of Jaquar or equivalent )

Providing and fixing glazed vitreous china flat back urinals approx. size 385X325X635 mm with fixing accessories all complete including cutting and making good the walls and floors complete wherever required. (Make: Model URS-WHT-132530 of Jaquar or equivalent )

Providing and fixing CP brass urinal valve auto closing system-pressmatic wall flange of approved quality with wall flanges complete.-15mmNB,98mm long weighing not less than 75gm.

Providing and fixing urinal partition with frosted safety glass of 8mm thick of size 900mm(height) x 450 mm(width) corner chamfered fixed in brick wall with stainless steel clips of grade 304 all complete.(Model 1810-US or 1810-UC of Jaquar or equivalant)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing & fixing C.P. brass push type pillar tap complete including cutting and making good the walls where required. (Make:Model : FLR-5015 of Jaquar or equivalent)

Providing and fixing towel ring square shape 210 mm long, 159 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of all complete (Make: Model AKP-35721P of Jaquar or Equivalent).

C.P. BRASS FITTINGS

Providing and fixing C.P. Brass Bottle trap including fisher union for wash basin and sink (Make: Model- ALD-769L250X190 of Jaquar or Equivalent) (a) 32mm dia

Providing and fixing C.P. brass short body bib cock 2-way with flange ((Make:Model :FLR-5041N of Jaquar or equivalent)) 15mm nominal bore

Providing and fixing C.P. brass angle valve 15mm dia. for basin mixer and geyser points (Make:Model : FLR-5053N of Jaquar or equivalent)

Providing & fixing stainless steel soap tray / Shower basket of approved make and design with necessary screws for toilets (Make : Model AKP 35731P of Jaquar Continental)

Poviding &fixing CP brass Health faucet with 8mm dia 1.2 metre long Flexible Tube with wall hook.Allied range of Jaquar or Equivalent

Providing and fixing UPVC floor trap with 100mm inlet and 100mm outlet with PVC grating with frame. Providing and fixing UPVC floor trap with 100mm inlet and 100mm outlet with PVC grating with frame.

WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (a) 15 mm nominal outer dia Pipes

(b) 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

(a) 32 mm nominal outer dia Pipes

Providing and fixing brass full way spherical valve with lever wheel IS marked (Zoloto make) 25 mm nominal bore

Providing and fixing on wall face un-plasticised-Rigid PVC sewer pipes conforming to IS:13592 (6kg/sqcm) including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion single socketed pipes with all accessories as clamps, bend, door, horn bend,shoe, cowl etc. complete as directed : (a) 110 mm dia

Part C - Electrical Works

Suplly and drawing following sizes of FR PVC insulated copper conductor,single core cable in the existing surface/recess/pVC conduit as required make Havells/Finolex/RR Kabel or equvalent

i) 2 x 2.5 sqmm + 1x 2.5sqmm earth wire

ii) 2 x 4 sqmm + 1x 4sqmm earth wire

Switch/Socket

Supplying and fixing following modular type switch/socket on the existing swith box/cover including connection etc.as required make legrand or equivalent

(a) 15 Amp Switch

(b) 15 Amp socket

(c) 5 amps switch

(d) 5 amps socket

Supplying and , fixing of following modules GI boxes along with modular base & cover plate for modular switch in recess etc as required make havels crabtree

Iii) 6 module

Installation testing and commissioing of prewired LED recess type light fittings of all accessories including connection with 1.5sqmm FRLS PVC insulated copper conductor single core cable earthing as required.

Installation of exhaust fan in the existing opening including making good the damage connection testing and comissioning etc as required

i) upto 450 mm Sweep

Supplying of Hand drier make Hygieia or equivalent

Supply of Five star rated Exhaust fan 300mm Heavy duty Make-Hacells/ Cropton Graves)

Supply of 20W LED light TMC set ( make Philips/Havells/CG/Bajaj)

SUNIL MAHAJAN (BID ID -3260053)