Construction of Double Storey 6 roomed school building at High School Kuchalna

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead :

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of :

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead :

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge:

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundationsetc.in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing stone soling, hand packed, incl. carriage

Providing and Laying of stone soling hand-packed on level in foundation; complete job including the cost of carriage for an average lead of 10 km from the source.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls

P/L and placing high strength deformed steel including cost of binding wireThermo-MechanicallyTreated bars of grade Fe 500D or more

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Brick with FPS bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing wood work in frames of doors,windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or withdash fasteners shall be paid for separately): 1st class Deodar wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 1st class kail wood 35mm

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 1st class kail wood 35mm

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.First Class kail wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 9.28.5 1st class kail wood 35mm

15mm cement plaster on rough side of single or half brick wall in1:6(1 cement : 6 fine sand mortar)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

12 mm Cement plaster of mix: 13.6.1 1 : 6 ( 1 cement : 6 coarse sand)

Providing and applying white cement based wall putty of avg.2mm of approved brand and manifuture

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Applying priming coat: 13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 8.2.1 Raj Nagar plain white marble/Udaipur green marble/zebra

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shapewherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micronsusing self drilling/ self tapping screws complete : 12.24.1 Ridges plain (500 - 600mm)

Providing and fixing plained eaves boarding. 12.69.1 2nd class Deodar wood 12.69.1.1 250x32 mm (nominal size)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.1 M.S. tube

Applying priming coat:With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat)

Providing and fixing bright finished brass handles with screws etc. complete :125 mm Handle

Providing and fixing bright finished brass handles with screws etc. complete 200 mm Handle

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :100x10mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :250x10mm

Stay hooks

L-Dop 18" with inbuilt Locking system

L-Dop 10" with inbuilt Locking system

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper

Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone

12mm Cement plaster finished with a floating coat of neat cement of mix: Septic

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the 25mm OD(SDR-7.4)

40mm OD(SDR-7.4) Roof to Down

50 mm OD(SDR-7.4) Ground to roof tanks

PPR Union 25mm

PPR Union 40mm

PPR Adapter 40mm

PPR Adapter 25mm

Providing and fixing ball valve PPR of approved quality complete 25mm dia OD

Providing and fixing ball valve PPR of approved quality complete 25mm dia OD 40 mm dia

Providing and fixing ball valve PPR of approved quality complete 25mm dia OD 50 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer incharge.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.25mm nominal bore, 152mm long, weighing not less than 440gms.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing water closet squntting pan (Indian type, W.C. pan) with JOO mm san_d cast Iron P or Strap, 10 liter low level white P.V.C flushing cistern, including flush pipe (of npproved make) with mnnual(y · controlled device (handle lever) conforming to IS: 7231, with all fittings and fixture, complete, including cutting nnd making good the walls and floors wherever required. White vitreous china Orissa pattern W .C. pan of size 580x440 UNIT mm wilh integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : Wash basin 550x400mm with a pair of a5mm CP brass taps

P/F white vitreous china pedestal for wash basin complete rested at back for the reception of pipe and fittings

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Flexible pipe 32 mm dia

P/F 8mm dia C.P/S.S jet with flexible tube up to 1mter long with S.S triangular plate to European type W.C of approved quality and make.

P/F 600x450mm bevelled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground glass to wooden cleats with C.P brass screws and washers complete.

P/F 600x120x5mm glass shelf with edges off. Supported on anodised angle frame with CP brass brackets and guard rail complete fixed with 40mm screws, rawl plugs etc.

P/F toilet paper holder (CP)

P/F in position PVC P or S traps

P/F in position PVC floor traps a) 100mm dia

P/F in position PVC floor traps b) 75mm

P/F soil, waste and vent pipes 1mm thick PVC S&S pipe (150mm dia)

P/F soil, waste and vent pipes 1mm thick PVC S&S pipe (100mm dia)

P/F soil, waste and vent pipes 1mm thicke (75mm dia)

P/F soil, waste and vent pipes 1mm thickPVC S&S pipe (50mm dia)

PVC Cowell 50mm dia

P/F PVC stay and clamps for PVC pipes 100mm

P/F PVC stay and clamps for PVC pipes 75mm

P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes 100mm

P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes 75mm

P/F plain bends 100mm

P/F plain bends 75 mm

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 100mm

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 75 mm

P/F Tee-junction of required degree with access door, inserted rubber washer 3mm thick, bolts and nuts complete.100x100x100 PVC 1mm 100mm

P/F Tee-junction of required degree with access door, inserted rubber washer 3mm thick, bolts and nuts complete.100x100x100 PVC 1mm 75mm

P/F PVC Reducer 100-50mm dia

Providing and fixing liquid PTMT soap container 109mm wide 125mm high and of approved quality weighing not less than 105 grms

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 18.73.2 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

P/F CP gratting100mm dia

P/F PVC connections 15mm

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominalsize),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line-

P/F master trap

P/F 50Lit Gyser

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) 13.42.1 Flush/Ruled PointingPointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) 13.42.1 Flush/Ruled Pointing

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge Interlock Tiles

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand); Ordinary cement without any pigment. Tiles

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Stone agg. Below 40mm size Avg. 45 Km by MT & 200 mtr by HL

Sand Avg. 45 Km by MT & 200 mtr by HL

Bricks Avg. 240 Km by MT & 200 mtr by HL

Stones Avg. 30 Km by MT & 200 mtr by HL

Providing Structural and Architectural design including Sanitary and electrical drawing for the work of Constt of double storey 6-roomed School Building at HS Kuchalna, including conducting of soil test for bearing capacity including 3D view & design approved from competent authority i.e. (IIT/NIT/ Design Directorate DIQC /GCET Jammu). (Complete in all respect)

Please Enable Macros to View BoQ information