SPECIAL REPAIR TO BLDG NO. P-298 (SINGLE ACCN) OF AD MSL REGT AND OTHER SANCTIONED WORKS UNDER GE (WEST) JALANDHAR CANTT

Amount

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.

M&L Painting the roof surface with a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/sq M over a coat of primer @ 0.3 litre per Sqm all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3.5 Kg/sqm and minimum 3mm thick rainforced with five layer polyster non wove fabric ( wt. Not less than 150 gms/sqm) land on bitumen coted surface by forced application complete all as specified

M & L for 10 mm thick rendering on concrete surfaces finished even and smooth without using extra cemet in cement mortar 1:4 for roof fineshed and using WPC 3% by wt of cement. Note : WPC shall be measured and paid separately under respective item.

M & L brushing neat cement slurry with 3kg of cement per sqm including cleaning and washing complete all as specified

M & L PCC Padding with cement concrete type B-I (1:2:4) 20mm graded aggregate to bring top surface of slab in slop complete all as specified

M&L for PCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in cills, PCC blocks, coping, benching, water troughs, seismic and other similar bands, plinth bend roof kerbs, mud stops, coved fillets of radius 75 mm provided at junction of parapet walls etc edges of concrete rounded or chamfered complete all as specified and directed .

M & L 40mm th. Brick tiles laid on bedding layer of CM 1;3 15mm thick and joints grouted flush in cement mortar 1:3mixed with 5% of crude oil by weight ofcement over APP membrane

Ditto as per description of item No 9 but except tiles

M & L flush pointing in CM 1:3 to brick tiles laid flat in roof or paving incuding raking out joints complete all as specified and directed.

Taking down cement plaster of any description any thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water all as specified.

M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified

--ditto- but in CM (1:4) complete all as specified and directed.

M&L Plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified

M&L for preparing surfaces new plastered surfaces of walls by applying two coats of oil bound distemper with 1mm thick Birla wall care putt on plastered surface preparatory to distempering complete all as specified.

Preparation of new plastered surfaces and applying three coat of white wash on ceiling surface all as specified and directed by Engr-in-Charge.

Preparation of old plastered surfaces or unplastered surfaces of walls and applying two coat of white wash all as specified and directed by Engr-in-Charge.

-ditto- as above item No 18 herein before but on ceiling surfaces

M&L for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatments on wall surfaces and applied two coat of cement base paint over one coat of primer all as specified and directed by Engr -in-charge.

M&L for complete removal of existing treatments on wall surfaces and applied two coats of oil bound distemper with 1mm thick Birla wall care putty on plastered surface preparatory to distempering complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified

Demolition of cement concrete in ground floor and paving/as in ( below or above ground level) all as specified

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) to receive the top layer of tiles

M&L for non-skid ceramic joint free coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 15mm thick bedding layer CM 1:6 complete all as specified.

Ditto as per description of above but in skirting and 10mm thick rendering as backing coat of CM 1:4

M&L for non skid ceramic coloured tiles of size 300 x 300mm & 7 to 8 mm thick in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with & including screed bed or beading layer of morter 15mm thick in cement morter (1:6) for laying floor finishes , complete all as specified and directed.

M&L for coloured glazed tiles of size 450x350x 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4

M&L for 50mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified

Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles all as specified.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius with old size brick thick walls built in cement mortar 1:6 all as specified.

M&L for half brick thick wall using with sub class 'B' old size bricks straight or curved on plan to any radius with old size brick thick walls built in cement mortar 1:4 all as specified.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

-ditto- but area exc 1.5 Sqm and not exc 4 Sqm each.

Mild steel conforming to Fe 290, Gde E-165 framed work as in door frames, chowkhats including necessary cutting, welding, bending, drilling etc., complete all as specified and directed.

S&F 35 mm thick plain, framed, panelled shutters factory made of second class hard wood (Hollock/Bonsum/Champlas) door shutters with two panels having lock rail and panels of 9mm BWP commercial ply, the size of rail and style as per IS 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 18-19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified.

S&F glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a).

Mild steel Helical door spring 150 mm long including roller plate, complete all as specified and directed.

Material and labour for Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two openable leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. (Four Nos for each window) including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100mm long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD-06/07. (Note: Wire gauge shall be measured and paid for separately).

ditto above item no 41 but as in glazed windows.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified

S/F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

S&F 40mm dia cup board knobs fixed with nut , screw and washer of brass polished

M&L Hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified

S&F floor door stopper aluminum alloy body anodized with hard drawn steel spring overall length 150mm complete all as specified and dierected.

Supply and fixing magic eye of brass body for doors complete all as specified and directed.

Preparation of new wood and wood based surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks.

M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane.

S&F 300mm long Aluminum alloy, anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminum alloy and fixed.

Supply & Fixing 100mm size butt hinges extruded aluminum alloy with galvanised mild steel hinge plate

S&F Aluminum anodized barrel tower bolt of extruded section of size 150mm

S&F extruded Aluminum alloy handle fabricated of size 150mm

Taking up of or down steel tubing and connections 15mm bore/20 mm bore and connections, including cleaning for refixing or removing to store yard complete all as specified and directed,

S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

ditto as per description of item No 59 but for 20mm bore tube

Cutting and chases to brick work, pinning in making good for concealed water tubing area n exc 10 cm girth

S&F in repair 15mm angular stop valves, fancy type chromium plated, with long shank and cup(concealed) screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed .

S&F in repair 15mm stop valves/Angle cock , fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed .

S&F in repair Bib tap fancy type cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete fixed in repairs .

S&F PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe 10 Ltr capacity complete all as specified. Fixed in repairs.

PVC connection fiber, reinforced 450 mm long with brass check nut and PVC washers at both ends complete

S&F Hot and cold wall mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to walls complete all as specified

S&F in repair Vitreous china wash hand basin, white flat, size 550 x400 mm incl brackets 32 mm waste coupling and waste pipe all as specified and directed by Engineer - in - Charge.

S&F Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified.

Disconnecting existing water tanks of any capacity and removing complete all as specified and directed.

S&F 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.

S&F 20mm for ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed

S&F 20mm Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed.

S&F brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union.

S & F Acrylic corner self set of three all as direcred and specified

Supply and fixing grating chromium plated 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified.

Chromium plated towel rail 600 mm long of approved make complete all as specified and directed . Make Onida/Varuna/Jay (Chd)

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white including bolts, flushpipe of polyethylene of low or high density or PVC 32mmdia anti syphonage pipe etc complete

Supply and fixing plastic water closet seat cover black closed patern with flat bottom and cover and mild steel chromium plated or aluminised hinging devices

S & F brass chromium plated jet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

Supply and fixing in repair mild steel pipe curtain rods (superior quality) 25mm dia PVC coated with two side brackets and finials fancy type including taking down old pelment box and making good the surface complete all as specified and as directed

Dismantling of CI pipe 100 mm dia pipe, jointed in cement morter or lead joint and taking off in treanch

Dismantling of CI pipe 75 mm dia pipe, jointed in cement morter or lead jont and taking off in treanch

S&F 100 mm dia Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors/walls

S&F 75vmm dia Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors/walls

S&F Bends of 100mm dimnishing pieces or tapers ( larger bore measured)

S&F Bends of 75mm dimnishing pieces or tapers ( larger bore measured)

S&F Cast Iron Tee 75 mm Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

S&F Cast Iron Tee 100 mm Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

M&L Cast iron trap 75mm dia with grating including jointing to waste pipe fixed in cement contrete type B-1 (1:2:4)

S&F stack clamps out of 25mmx 3mm flat iron and 8mm dia round iron stays , including bolts and nuts and securing ends of stays to wall and roof all as specified

S & F 110 mm bore PVC (SWR) pipe of pressure rating 6kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.

110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

M&L for cement concrete type D-2 type 1:4:8 (40mm graded aggregate) as in foundation/mass concrete filling complete all as specified and directed.

M&L for 60 mm thick precast cement concrete (M-35) factory made, machine pressed interlocking paver blocks, with grey cement and pigment any shape and size as approved by GE, laid over sand cushion complete all as specified and directed by Engr-in-Charge.

M&L sand cushion under for laying interlocking paver all as specified

Demolition and breaking up drain pipes any dia of bore (SGSW, AC or reinforced concrete) pipe set in cement mortar complete all as specified

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cespits, manholes, pier holes etc n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Ditto as per description of item No 2 above but for depth exc 1.5m and not exc 3m beyond the first 1.5m depth

Returning filling in layers including leveling watering and well ramming in layers n.exc 25 cm thick compelte all as specified.

Removing surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point.

Supplying, laying, jointing and testing Reinforced concrete pipes, class NP-2, 150 mm dia laid in trenches and jointed complete with collers

Supplying, laying, jointing and testing Reinforced concrete pipes, class NP-2, 200 mm dia laid in trenches and jointed complete with collers

M&L cement concrete type D2 1:4:8 (40 mm grade aggregate)as in concrete bed to drain pipes 150mm internal dia including forming cradles in all as specified.

M&L cement concrete type D2 1:4:8 (40 mm grade aggregate)as in concrete bed to drain pipes 200mm internal dia including forming cradles in all as specified.

M&L cement concrete type D2 1:4:8 (40 mm grade aggregate)as in concrete bed to drain pipes 200mm internal dia including packing under and completely surrounding pipes with concrete after thery are laid and tested in all as specified

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM 1:4 all as specified and directed by Engr-in-charge.

M&L brickwork with subclass `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 but except bricks

Brick work with sub class 'B' bricks laid on edge in floors, bedded & jointed with cement mortar (1:6) and pointed in CM(1:3) all as specified

M&L for 15 mm thick cement plaster in cement mortar 1:4 with water proofing compound as per manufacturer's instructions to brick or concrete surface finished even and smooth without using extra cement and using waterproofing compound all as specified (WPC shall be measured and paid separately)

Supply only integral water proofing compound

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc

Material and Labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed by the Engineer in Charge.

Demolition of cement concrete (reinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level complete all as specified and as directed.

M&L for precast reinforced cement concrete type B-1 1:2:4 (20mm graded aggregate) and set in Cement Mortar (1:4) as in landings, manholes cover slabs, chajjas, shelves and similar articles including necessary form work all as specified and directed.

M&L for MS TMT bars 10 mm and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for clos hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

Cleaning of maholes in use by taking out complete sludge water, solids brick bats polythene silt etc complete by mechanically by HCV mounted suction is charge machine removing/depositing the entire retirieved material outside peripherey defence land including taking off maholes cover an re-fixing the same after cleaning for the following for conecting the sewer lines to newly constructed manholes :- Exceeding 1 m depth but not exceeding 2 m depth of any size

Cleaning of maholes in use by taking out complete sludge water, solids brick bats polythene silt etc complete by mechanically by HCV mounted suction is charge machine removing/depositing the entire retirieved material outside peripherey defence land including taking off maholes cover an re-fixing the same after cleaning for the following for conecting the sewer lines to newly constructed manholes :- Exceeding 2 m depth but not exceeding 3 m depth of any size

S&F 150mm dia SGSW gully trap setting and jointing with cement joint complete all as specified and as directed.

Cleaning of chocked/blocked sewage lines of any bore by collecting loose sedimented sand, frill, ash, sludge water, rags, fibers or vegetation in nearest manholes for disposal from the following depth of sewage line:150 mm bore of pipe

Cleaning of chocked/blocked sewage lines of any bore by collecting loose sedimented sand, frill, ash, sludge water, rags, fibers or vegetation in nearest manholes for disposal from the following depth of sewage line:Exc 150 mm but not exc 300 mm dia of bore

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore including dismentling of old PVC pipe.

S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door.

Taking out liquid/solid mud, soil from drain of any depth including removing and removing out of defence land complete all as per specified and directed.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc. complete and making good disturbed surfaces of walls ceiling etc. all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Taking down sub main wiring of two single core PVC cable PVC insulated 6/4 sqmm size cable including conduit or wooden batten and removing the material from site and making good the surfaces of walls, ceiling etc. all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Taking out unserviceable main switch/DB's complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), drawn in and including PVC concealed conduit medium grade (ISI marked) with accessories like bends, tee junction boxes fixed on wall, ceiling etc. with sunk mild steel pressed terminal box 1.6mm thick sheet duly painted with two coats of black bituminous paint over a coat of red oxide primer and providing 3mm thick laminated bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one light / call bell / fan point controlled by one, one way switch complete all as specified and as directed.

All as per Ser item No. above but 3 pin socket out let 5 Amps on same board with other switches all as specified and directed.

All as per Ser item No. above but 3 pin socket out let 5 Amps on the independent board switches all as specified and directed.

All as per ser item No. above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing switch piano flush type, 15 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

S&F socket out let multipurpose 5 pin 5 Amps, flush type, 230/250 volts, AC with ISI marked

S&F socket 6 pin, 15 Amps, flush type, multipurpose, 230/250 volts, AC with ISI marked

S&F bell push,flush type, 5 amps, SP, one way, 230 volts AC complete all as specified and directed.

Supply and fixing lamp holder PVC, insulated body with back plate suitable for batten fittings including LED lamp 7 watt complete all as specified and directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm having 3 terminals, PVC polycarbonate and isolated body complete all as specified and as directed.

Supply and fixing stepped socketed type electronic fan regulator flush type and connecting up complete 230/250 volts as diredcted by Engr-in-Charge

M&L for sub main wiring with two single core PVC insulated and unsheathed cable 6 Sqmm with multi standard copper conductor, FRLS type cable drawn through and including PVC concealed conduit not less than 20mm in size complete with all accessories alongwith provn of 6 Sqmm PVC insulated and unsheathed, multi standered copper conductor, FRLS type cable as earth wire

Supply and fixing Sheet metal enclosure for DBs when MCBs to be used, SPN 8 ways 240 V, with 200 Amps rated bus bar, double door, epoxy coated inside and outside complete all as specified.

Material and labour for sheet metal encloser for single Door ,DB's when MCCB to be used TPN 8 way with 200 amps rated bus bar double door type complete with incoming/outgoing connection through proper size of lugs complete all as specified and directed.

M&L for MCCB 63A complete all as specified and directed

S&F MCB SPN32 to 63 amps 240 volts

S&F MCB SP 6-32 amps 240 volts

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burned directly in gound (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal gound level connected to GI earth wire will be protected by 15 mm dia GI pipe light grade watering pipe 20mm dia GI light grade GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation and earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and directed Note: Result should be less than 3Ohm

Supply and fixing bell electric (ding dong) 230 volt, SP complete all as specified and directed.

Supply and fixing Exhaust fan AC, 230/240 volts of size 300mm sweep, heavy duty, metal body with louvers/ shutter and connecting with 3 core 1.5sqmm copper conductor PVC insulated wire from fan to ceiling rose

Taking down XLPE insulated, armoured heavy duty electric cable with aluminum conductor, 1100 volts grade, cross sectional area 4 core 50 Sqmm on floor/wall including lugs & fitting

Supplying, Laying, jointing and testing LT underground XLPE insulated armoured heavy duty electric cable PVC sheathed with stranded aluminium conductor, 1100 volts grade of size 50 Sqmm 4 core, laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and directed.

S&F LED tube light fitting Battern 1 x20W (Double side) including LED lamp with 2100 lumen output with internal surge protection device of 4KVwith voltage band of 140-280V cRI-6500K (White light) fixtures box type with retrofit LED rod 20 w and connection electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.

S&F in replacement LED street light fitting 60W Endura Pearl Plus including LED pressure dia cast aluminum iP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 corecomplete all as specified and directed.

Excavation in trenches in soft/ loose soil n. exc. 1.50 mtr wide and n. exc. 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25 cm thick each layer complete all as specified and directed.

Material and labour sand for cushioning with 8cm thick layer before laying of cable and 15cm thick layer after laying of cable in trenches complete all as specified and directed.

Removal of surplus spoil to a distance n. exc. 50 mtr and depositing where directed at a level n. exc. 1.5 mtr above the starting point complete all as specified and directed.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/ abutting each other complete all as specified and directed.

NIRMAL SINGH

M/s Sanjiv Kumar

R.S.ENTERPRISES

Manjeet Singh Contractor

M/s Bansi Lal

B.L. Chaudhri and Co.

S S BUILDERS