Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹17.9 L+₹90,449.50 (5.32%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Bharatpur
Kanjoli line Bharatpur
Provn of Certain sanction work Part -VI at Sewar Fort Under GE Bharatpur
2022_MES_553155_1
8194/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE Bharatpur
as per tender document
6 documents required · 6 mandatory
₹500
GE Bharatpur
₹38,000
Yes
23 Nov 2022
20 Sept 2022
19 Oct 2022
20 Sept 2022
17 Oct 2022
4 Oct 2022
21 Sept 2022 - 30 Sept 2022
Amount
Development of bore wells indulding flushingout tree roots, silt, fine sand by air compressor of suitable capacity not less than 450 CFM at 150 PSI & over pumping (25% extra capacity pump) to make water free from trublidity till clear water is obtained from bore well complete all as specified and directed
Yield test of borewell after completion of development of bore well by V notch method or any method of compresser or by pumping as required (24 hrs) complete all as per IS and as directed.Note: Necesssary equipment such as collection V notch water collection Tank motor pump set for testing for yield test are arrange by the contractor. The cost of the same is deemed to be included with unit rate of item.
Supplying and lowering in the bore hole, the plain assembly MS casing pipe Fe 410 and Fe 450 grade steel as per IS-4270 and nominal bore of pipe 200 mm and wall thickness of 5.4 mm including welding flange with nuts bolts washer as suitable at site of pipe at site with two coats of approved anti-corrosive paint on outer faces of the pipe and specials including supply of all labour, equipments and materials complete as per specifications and instructions of ENGR-IN-CHARGE.
Supplying and lowering in the bore hole 200 mm, 5.4mm thick MS casing slotted pipe with all necessary fittings and painting of pipe with two coats of anti corrosive approved paint on outside surface of pipe before lowering including supplying all labour, equipments and materials complete as per IS, specifications and instructions of ENGR-IN-CHARGE. Note : “ Cutting of slots of width is approx. 1.63 to 2 mm with sides perpendicular to the surface of the pipe and of length varying from 62mm to 80mm. The open area of slots shall not be less than 12% to 15% of the total surface area of the strainer pipe.”
Supply fixing and lowering MS bail plug and well cap suitable for 200 mm bore plain pipe thickness 5.4 mm complete with welding and painting of pipes all as specified
Supply and erection of housing clamp fabricated out of MS flat iron bent to shape 50 mm x 8 mm thick including nuts, bolts and washers as per IS-2800.
Supply of pea gravel size ranging from 5mm to 12mm. All gravel shall consist of hard well rounded particles reasonably uniform with uniformity coefficient of less than 2 including packing in the annular space between casing pipe & drilled bore as per the direction of ENGR-IN-CHARGE.& as specified, complete.
Carry out resistivity survey for find out ground water aquifier by the team of Central ground water board/State ground water dept, define of water aquifier at 3 locations in Kanjoli line area incluiding to submit test report complete all as spicified and directed
Supply, erection, testing and commissioning of Submersible pump and motor as per IS-9283 (latest) for a pumping capacity/dischrge of pump 600-80 lpm for head of 40M -160M, suitable for 50 mm dia colume pipe and complete.Make Kirloskar model No. 150HHF-1510 or equivalent in CRI/CG/KSB
S&F submersible cable weather proof with multi-stranded copper conductor 3 core of size 6 sqmm 1100 volts grade heavy duty including all accessories for connection pump from panel board, testing and commissioning complete make: - Havells/Polycab/ plaza.
Supply and laying of GI pipe 3 mtr large in flange joint after 3 mtr complete with rubber gasket, nuts, bolts, washer for column pipe to bore well of size 50 mm dia including necessary arrangements for coupling arrangement on top and bottom ofv GI pipe with pump and delivery pipe complete all as specified and directed.
S&F sluice valve 50 mm bore class PN-1.6 with flanged and iron wheel head, shut and open directed cast on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.
Supply and fixing of non return valve of size 50 mm dia, class PN-1.6, cast iron body, single door, both ends flanged type including all necessary fittings ie rubber gasket, nut & bolts, washers complete all as specified and directed.
Supply and lay LT UG cable 1100 Volts grade XLPE insulated, armoured heavy duty electric cable with aluminium conductor including aluminium lugs and cable glands of size 25 Sq mm 4 Core make: Polycab/Plaza/Havell's
Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M deep for foundation/ cable trench, not exceeding 10 Sq mm on plan and getting out in soft/loose soil.
Returning filling including spreading, leveling and well ramming in layers not exceeding 25 Cm thick in soil complete all as specified
Removal of surplus soil to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified.
Supplying, spreading and punning sand for cushoining to cables in treches complete all as specified Note : Punned thickness will only be measured
M&L for brick protection with sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as directed.
Supply and fixing of pressure guage, 100 mm size fitted on delivery side of pump set(0 to 10.6 kg/sqcm) complete with needle valve etc all as speified and directed.
M&L Earthing complete as per electrical plate No 3 of MES SSR Part I with galvanised steel plate earth electrode 60 cm x 60 cm x 6.0mm, burried directly vertically in ground in a pit of depth not less than 2.25 metres below ground level with the top edge of earth plate at a depth not less than 1.5m below normal ground level connected to and including galvanised iron or steel earth strip lead 25X4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel earthing lead protected by galvanised iron or steel pipe 20mm bore medium grade and connected to continuous earth wire on pole/ test point. Watering pipe shall be 15mm bore GI medium grade including excavation and earth work in any type of soil, PCC pit and RCC cover complete all as specified and tested complete.
S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 100 mm bore including scaffolding upto 25 meter stageing for pipe line erection for Over Head Reserivor and saddling for pipe line with necessary arrangements complete all as specified and directed.
S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 80 mm bore including scaffolding upto 25 meter stageing for pipe line erection for Over Head Reserivor and saddling for pipe line with necessary arrangements complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in coping of existing/new poles / foundation for poles, struts, posts , trust blocks for pipes etc including necessary form work, finished the exposed surfaces fair and even without using extra cement complete all as specified and directed.
S&F of Nylon rope in submersible bore wells from motor to top edge of the bore well of size 6 mm dia for holding of submersible pump motor set all as directed by Engineer-in-Charge.
Supply, install, testing & commissioning of Microprocessor based single phase tamper proof electronic static pre paid cum postpaid energy meter rating 240 Volts, 50 HZ, of range 10-60 Amps, complying to IS 15884 & IS 16444 incl meter box of accrylic sheet of appropiriate size with LED display and parameters like Voltage, Current, Frequency, Power, Power factor, KWh/KVA, default /in built dual source, inbuilt long range (LORAWAN) Communication suitable for outdoor LoRa data accumulator and also compatible for Prepaid and Postpaid online energy monitoring billing system, with disconnection /reconnection through remote software / data export to ERP complete all as specified and as directed by Engr-in-Charge. Note for S.No 1:- Quoted rate shall have deemed to be inclusive of following parameters: - (a) Meter reading record shall be submitted before and after replacement duly signed by the contractor rep and MES rep. (b) Old meters should be handed over to MES store. (c) Any rejoining of wires /cables shall be done using suitable ferrule /cable connectors after removal of meter. (d) The cost of making good disturbed surfaces & matching to the existing surface is deemed to be included in the unit quoted rates.Make: ELMEASURE PE5121 or equally in SIEMENS/Secure/Schenider (e) The cost of taking down old unsv electric meter and depositing to the same to MES store yard/E&M office is deemed to be included in the unit quoted rates.
Supply, installation, testing and commissioning of Outdoor LoRa accumulator for long range communication up to 800M suitable for communicating with Prepaid come postpaid meter with LoRa communication protocol and the data transfer to the Software complete all as specified and as directed by Engr-in-Charge. Note for S.No 2 : The cost of pole /fixing /mounting arrangement on which the accumulator to be installed and SMPS power supply is deemed to be included in theunit quoted rates.Make: ELMEASURE LORAGW or Techno commercially equivalent
Supply and Configuration of the Web based Software with following modules :- (i) Meter data management Modules : The meter data management module would be responsible forcollecting the data from the concentrator and make the data available to thec blling system . The billing system wold support offline meter data entry. the meter data management sysytem would capture anf provide the following data. (a) 30 min instantaneouse data from all the meters for seven parameters - cumulative neergy , Power, Current , Voltage, Power factor and frequency. (b) Monthly and quarterly billing survey data for cumulative energy and max demand. (ii) Billing Module : The billing module would collect the dat from the meter data management module , calculate billing determinant and make energy data / billing data available to admin and end user. (iii) Occupation and Vacation module : The system woud support occupation?vaction based on the unit categories The system would support automatic data capture on occupation and vacation events. (iv) Coustomer Module : The system would include a coustomer portal for the resident/occupants to logt in and view their own energy/billing data. (v) Energy Accounting module : The system weould include features of energy accounting , the system would to able to account for total energy block wise, facility wise and would also allow calculations of the unaccounted energy in case total energy meter is also available. (iv) Commumnication Module : The system would provide communication of energy data and bills via print, email and sms methods. (vii) Meter Master Data : The system would support meter dayav repository. The system would suppot meter replacement process. (viii) Excle Export : the system would support export of metering and illing data in excle format. Make : Elmeasure, Model : ELNET or Techno commercially equivalent (ix) Meter Data Maintenance at Cloud for 2 Years
M&L for Hosting, GPRS charges for 2 years warranty period Make: Airtel/JIO/Vodafone
M&L submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor four runs and one run of 6 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit with all PVC accessories fixed on wall, floor/ceiling etc.
M/s Ranaji Construction Co
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .