CWE/GGN/GT-38/2021-22 REPAIR REPLACEMENT TO JOINERY OF WOODEN, MILD STEEL AND ALUMINIUM, FLOORING, TILLING, PLUMBING, SANITARY FITMENTS, PERIODICAL SERVICES, CERTAIN INTERNAL BR WORKS AND EM WORKS ETC AT AF STN DHANSA UNDER GE AF GURGAON

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete 1:4:8 type D-2 using (40mm graded stone aggregate) as in foundation or sub base and mass concrete etc complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class 'B' brick, straight or curved on plan to any radius in half brick works, built in cement mortar 1:4 etc complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete 1:2:4 type, B1 using (20 mm graded stone aggregate) as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick rendering on fair faces of brick or concrete surface including finishing the surfaces even and smooth without using extra cement in cement mortar 1:4 with using Water proofing compound @ 3% by wt of cement etc complete all as specified and as directed by Engr-in-charge. Nots : WPC shall be measured and paid seperately

Supply only integeral water proofing compound complete all as specified and as directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge.

M&L for 75mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed by Engr-in-charge.

M&L for 25mm thick PCC 1:2:4 type B-1 using (20mm graded stone aggregate) as in sub base of floor tiles complete all as specified and as directed by Engr-in-charge.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for bedding of tiles complete all as specified and as directed by Engr-in-charge.

M&L for 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles complete all as specified and as directed by Engr-in-charge.

M&L for joint free Non- skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 but n.exc 0.18 Sqm, in floors/shirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-charge.

M&L for joint free Glazed ceramic coloured/ printed tiles in vertical surface of size 350x 250 x 6-7mm/450x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on walls as in dado/ skirting etc complete all as specified and as directed by Engr-in-charge.

M&L for Machine pressed precast concrete design interlocking paver block any shape and size confriming to IS 15658-2006 of 60mm thickness , M-35 grade with Grey Cement and no pigment complete all as specified and as directed by Engr-in-charge. (Sand cushion will be measured and paid seprately).

All as per item 16.0 herein before but except paver block.

M&L for sand cushioning including watering and consolidations etc complete all as specified and as directed by Engr-in-charge.

M&L for chequered cement concrete coloured tiles 30 cm x 30 cm x 25 mm, set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and as directed by Engr-in-charge.

Dismantling of granite tiles/ wall clading tiles including cement motrar bedding cement mortar bedding (but not backing ) removing serviceable stone to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge.

M&L for 15mm thick in cement mortar 1:4 as backing coat coat of wall cladding etc complete all as specified and as directed by Engr-in-charge.

M&L for granite (of any type) stone slab 18 to 20 mm thick machine cut and machine polised, as in Dado , skirting, etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall complete all as specified and as directed by Engr-in-charge.

Demolition of mud phuska from roof including taking down the earth from roof down from building including plastering/ roof paddings if any complete all as specified and as directed by Engr-in-charge.

M&L for 3mm thick APP modified prefabricated membrane in five layers & weight not less than 3.6 Kg/Sqm water proof membrane reinforced with non-wooven polyster without aluminium paint over top surface of water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over and inluding a tack coat of bitumen primer @ 0.30 Kg per Sqm as per manufacturer's instructions of APP modified membrane sheet complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick rendering in CM 1:4 on roof top of concrete surface including finishing the surfaces even and smooth without using extra cement with water proofing compound as per manufacture instruction etc. complete all as specified and as directed by Engr-in-charge. Note: WPC shall be measured and paid seperately.

M&L for cement concrete type 1:2:4 , B-1, (using 12.50 mm graded stone aggregates) avg. 50 mm thick as in roof padding finishing surface even and rough complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:2:4 tpye B-1 using 20mm graded stone aggregate as in copping, benching, gola and the similar items complete all as specified and as directed by Engr-in-charge.

Taking down plaster of any description on brick or stone walls etc. including raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces including rendering on fins , fascias, chajjas, parapets etc. and finishing the surfaces even and fair without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for guniting work to RCC work in coloumn, beam, slab, chajja etc by removing loose concrete cover etc. cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mess fabric or wire not less than 95x95x3mm adhesive, plaster grade for concrete admixture. 1 part of Ordinary Portland cement 53 grade, sand and 2 part of course sand with average thickness 40mm applied with the pressure of 2 - 2.5 Kg / Sqm by guniting machine including rendering, 20mm average thick in cement motar 1:4 on fair faces of guniting work including making proper geometrical shape and finishing the surfaces even and smooth with out using extra cement and necessary scafolding complete all as specified and as directed by Engr-in-charge. Note: where reinforcement is required shall be measured and paid for separately.

M&L for 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing the surfaces even and fair without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new plastered surfaces and applying two coats of Apex Paint (Camouflage paint) as approved pattern over a coat of primer (Manufactured by Asian Paints or weather shield Manufactured by M/S Dulux) complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plastered or unplastered surfaces of walls/ ceiling and applying two coat of cement base paint over a coat of primer over a layer of wall care purtty complete all as specified and as directed by Engr-in-charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of paris etc and thereafter applying two coat of Cement base paint complete all as specified and as directed by Engr-in-charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper over a coat of primer over a layer of wall care putty for smooth finish complete all as specified and as directed.

All as per item 36.0 herein before but on surfaces of ceiling.

M&L for Complete removal of existing treatment from external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary filling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying two coats of Apex Paint (Camouflage pattern) over a coat of primer (Manufactured by Asian Paints or weather shield Manufactured by M/S Dulux) complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

Removing excavated material (soils) exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and as directed by Engr-in-charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-charge.

S&F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410-W (Gde E- 250) quality A complete all as specified and as directed by Engr-in-charge.

S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240 complete all as specified and as directed by Engr-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws complete all as specified and as directed by Engr-in-charge.

S&F Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge.

S&F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing,Fe 410 -W (Gde E- 250) quality A complete all as specified and as directed by Engr-in-charge.

Dismanting of rolling shutter, laths of curtain, hood cover etc complete all as specified and as directed by Engr-in-charge.

S&F 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed by Engr-in-charge.

S&F Safety lever locks mild steel with 4 levers for rolling shutters incl ball bearing complete all as specified and as directed by Engr-in-charge.

Dismantling of fencing posts or struts (wood, steel RCC) any section, posts embeded in cocrete, brick work, masonry etc, including taking out embeded portion and making good distrubed ground complete all as specified and as directed by Engr-in-charge.

Dismantling of concerntina coil of any size any description fixed in post or angle of any kind of complete all as specified and as directed by Engr-in-charge.

S&F Mild steel work as in posts and struts in fencing as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-charge.

S&F re-inforced punched concertina coil of 900 mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/ clips for tying at crossing etc complete all as specified and as directed by Engr-in-charge.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete type B-2 1:2:4 (40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters buttreses columns, pillars, boundry pillars and posts and like for fixing of angle iron on top of boundry wall , including form work complete all as specified and as directed by Engr-in-charge.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any (weight not exceeding 4 kg/ sqm) complete all as specified and as directed by Engr-in-charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed by Engr-in-charge.

Supply only MS galvinised chain link fencing any size and any type wieght of 4.0 Kg per Sqm complete all as specified and as directed by Engr-in-charge.

S&F Mild steel 5 to 10 mm dia screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-charge.

Dismantling of old PVC (SWR) pipe upto to 110mm dia bore, laid in trenches and wall etc complete all as specified and as directed by Engr-in-charge.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed by Engr-in-charge.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed by Engr-in-charge.

S&F 110 mm dia bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed by Engr-in-charge.

S&F 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and as directed by Engr-in-charge.

S&F 75 mm dia PVC (SWR) bends any radius with rubber rings joints complete all as specified and as directed by Engr-in-charge.

S&F 75 mm dia PVC (SWR) vent cowl complete all as specified and as directed by Engr-in-charge.

S&F 110 mm dia PVC (SWR) vent cow complete all as specified and as directed by Engr-in-charge.

M&L for 125/110 mm PVC (SWR) gully trap, setting and jointing with solvent cement as required complete all as specified and as directed by Engr-in-charge.

S&F in repair 75mm dia CI floor /nahani trap with grating CP including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engr-in-charge.

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and as directed by Engr-in-charge.

S&F as in repair vitreous china wash down water closet pan (Pedestal Pattern) EWC white (excluding flushing cistern & flush pipe) incl connection to out going pipe and flushing pipe complete all as specified and as directed by Engr-in-charge.

S&F as in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge.

Taking down 15 mm bore mild steel tubing and connections incl cleaning for refixing or removal from site complete all as specified and as directed by Engr-in-charge.

All as per item 76.0 herein before but for 20 mm bore.

S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling , concealed in walls or laid in floors complete all as specified and as directed by Engr-in-charge.

All as per item 78.00 herein before but 20 mm bore.

S&F in repair 15 mm bore bib tap chromium plated with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and as directed by Engr-in-charge.

S&F in repair 15 mm bore bib tap chromium plated, fancy type, long shunk screwed down for iron pipes or for brass ferrule complete complete all as specified and as directed by Engr-in-charge.

S&F as in repair 15 mm bore pillar taps cast copper alloy capaston head chromium plated, fancy type screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed as in repair complete all as specified and as directed by Engr-in-charge.

S&F in repair 15 mm bore stop valve/angle valve cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed by Engr-in-charge.

S&F in repair 15 mm bore Twin one angle valve/ bib tap cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed by Engr-in-charge.

S&F 15mm size PVC connection pipe with PTMT nuts length 600 mm complete all as specified and as directed by Engr-in-charge.

S&F in repair 20mm PVC ball valves high pressure with epoxy coated aluminum rod & high density plastic ball screwed for iron or for union complete all as specified and as directed by Engr-in-charge.

S&F in repair 15mm PVC ball valves high pressure with epoxy coated aluminum rod & high density plastic ball screwed for iron or for union complete all as specified and as directed by Engr-in-charge.

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed by Engr-in-charge.

All as per item 88.0 herein before but 20 mm bore.

Disconnecting existing tanks, exceeding 500 and not exceeding 1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed by Engr-in-charge.

S&F rotational moulded polythene water storage tank of capacity 500 Ltr (rectangular/square with closed top cover), hoisted and fixed in position all specified in SSR part –I ( 1991) and including dismantling of old tank, complete all as specified and as directed by Engr-in-charge. Note : The cost of accessories like inlet and out let pipe ball valve to air vent pipe shall be measured and paid separately under concerned item No thing extra admissible on this account.

Taking down carefully old copper/aluminium point, wiring (light, fan, socket or power) complete, including fitting such as switches, ceiling roses, pendants, regulator socket tube light fitting of any type, Bulk head fitting etc segregation serviceable fitting/fixture and keep them safe custody for reuse and removing materials from the site and making good disturbed surface of walls&floors etc as per existing specification complete all as specified and as directed by Engr-in-charge.

Taking down old unserviceable main switch, DB's/RCBOs/MCCB/Sheet Metal Enclosures including MCBs & wooden/GI/MS sheet board etc and removing materials from the site of work complete all as specified and as directed by Engr-in-charge.

Taking down old unserviceable sub main wiring any size/ core/ type of copper/ alluminium conductor. including making good the disturbed surfaces and removing materials from the site of work complete all as specified and as directed by Engr-in-charge.

M&L for point wiring complete with stranded copper conductor 1.5 Sq. mm size (Nominal area) PVC insulated unsheathed cable 650 volts grade conforming to IS drawn in and including medium duty concealed in PVC conduit conforming to IS and ISI marked not less than 20 mm dia with 1.6mm thick concealed pressed steel terminal boxes with plate and framecover for rquired module including single core stranded copper conductor 1.5 sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for :-

(a) One light point/bell point/one fan/exhanust fan controlled by one,one way switch.

(b) For one 5 pin, socket outlet 5/6 amp on independent board with other switches

(c) For one 3 pin socket outlet 5/6 amp on same board

M&L for point wiring complete with stranded copper conductor 4 sqmm single core (nominal area ) PVC insulated and unsheathed cable 650 volts grade drawn in and including medium duty concealed in PVC concealed conduit conforming to IS and ISI marked not less than 19 mm dia with 1.6mm thick concealed pressed steel terminal boxes with plate and framecover for rquired module including single core stranded copper conductor 4.0 sqmm PVC insulated unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as specified for one 6 pin socket outlet two in one 16/6 amps on an independent board.

S&F switch modular type single pole one way 6 amps complete all as specified and as directed by Engr - in - charge.

S&F Bell push modular type 5 Amp complete all as specified and as directed by Engr - in - charge.

S&F switch socket combination 2 in 1, 6 Amp modular Type 5 pin multipurpose suitable for independent board complete all as specified and as directed by Engr - in - charge.

S&F socket outlet 2 in 1 3/5 pin 6 Amp modular type multipurpose suitable for same board complete all as specified and as directed by Engr - in - charge.

S&F switch socket combination 2 in 1, 5 pin multipurpose 16 A , modular type complete all as specified and as directed by Engr - in - charge.

S&F of ceiling rose surface bakelite two to three terminals.

S&F in replacement of MCB distribution board single pole and neutral 8 way factory made sheet steel, phosphates, powder painted with 200 Amps rated busbar, 240 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified and directed by Engr in Charge.

S&F in replacement of MCB distribution board single pole and neutral 4 way factory made sheet steel, phosphates, powder painted with 200 Amps rated busbar, 240 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified and directed by Engr in Charge.

M&L for submain wiring alongwith earth wire single core multi stranded copper conductor FRLS unsheathed PVC insualted 1100 V grade cable drawn into and including PVC casing capping sleeves and caps of adequate width and length with accessoris and fittings like bend, crosses wall crossing etc 2x 4.0 sqmm + 1x 4.0 sqmm wire complete all as specified and as directed by Engr - in - charge.

M&L for submain wiring alongwith earth wire single core multi stranded copper conductor FRLS unsheathed PVC insualted 1100 V grade cable drawn into and including PVC casing capping sleeves and caps of adequate width and length with accessoris and fittings like bend, crosses wall crossing etc 2x 10.0 sqmm + 1x 10.0 sqmm wire complete all as specified and as directed by Engr - in - charge.

S&F PVC/Wooden blocks as suitable to site condition for fixing tube light fitting on wall/ceiling complete all as specified and as directed by Engr - in - charge.

S&F in replacement of tube light fitting 1X20 Watt, LED Batten wall mounted with alumunium housing and integrated electronic driver complete all as specified and as directed by Engr - in - charge. Make havells cat part no LUMLINEPLUSBS20WLED865SPCSS or equivalent in approved makes given in Tender Documents.

S&F in replacement of tube light fitting 1X10 Watt, LED Batten wall mounted with alumunium housing and integrated electronic driver complete all as specified and as directed by Engr - in - charge. Make havells cat part no LUMLINEPLUSBS10WLED865SPCSS or equivalent in approved makes given in Tender Documents.

S&F sheet metal enclosures for DB-12 way, SPN, 200 Amps Bus bar 240 Volts DOUBLE door complete all as specified and as directed by Engr - in - charge.

S&F MCB SP 240 volt, 5 to 32 Amps, C series, 10 KA complete all as specified and as directed by Engr - in - charge.

S&F MCB SPN 240 volt, 5 to 32 Amps, C series, 10 KA complete all as specified and as directed by Engr - in - charge.

S&F electronic type modular , 120 watt, 2 modul fan regulator complete all as specified and as directed by Engr - in - charge.

S&F Bell Multi Music type complete all as specified and as directed by Engr - in - charge.

S& F in replacement of decorative wall light fitting made up of high grade engineering plastic material suitable for LED Lamp15/20 w complete all as specified and as directed by Engr - in - charge. Make Havells cat part no LHFDGBE1TZ1W035 or equivalent in approved makes given in Tender Documents.

Net Contract Sum will be after deducting Sch of Credit of Rs 85,084.00

M/S RK Builders

M/s Nikhil Kumar Builders

MRITUNJYA ASSOCIATES

Goyal Enterprises