WORKS CONTRACT FOREXECUTION OF WORKS UNDER RDS SCHEME IN VARAGUR SECTION IN VARAGUR FEEDER

EXCAVATION OF POLE PITS / Stay Set:

Excavation of pole pit upto 27' (8.0 m) Pole by using JCB or manual

Excavation of pole pit above 8.0 Mtr pole PSC/RCC/RSJ pole by using JCB or manual

Stay pit 4.5' to 5' depth by using JCB or manual

ERECTION OF POLES AND ACCESSORIES

PSC/ RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

PSC/ RCC poles/Metal poles above 8.00m by using JCB ormaual

Erection of stay set complete

Fixing of Line Materials

HT "V" cross arms (all types) / Channel cross arms/ Guarding Cross arms

Tapping Channel Cross arm

LT 3 phase cross arms

LT Single phase cross arms

HT/LT TI Fittings

Fixing of Aluminium Knob

Fixing of HT pin Insulators 22 KV

Fixing of HT 22 KV strain disc.

Fixing of LT pin Insulator

Fixing of LT shackle

Re-sagging of HT/LT lines

Re-sagging ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor

Re-sagging ACSR 7/2.59 mm / AAAC 2.50 mm Weasel and ACSR 7/2.11 mm conductor

CONCRETING WORKS:

Sleeve concreting including materials (Cement + River Sand/ Msand and Blue metals and watering)

Stay Concreting including cost of materials and labour 375mmx375mmx50mm

EARTHING:

Earthing of pole with coil earthing including burying looping and binding.

LOADING AND UNLOADING CHARGES:

Loading of poles upto 8.0 M/ 27'

Loading of poles above 8.0 M

Loading of metal poles (All sizes)

UnLoading of poles upto 8.0 M/ 27'

UnLoading of poles above 8.0 M

Loading of metal poles (All sizes)

Loading of materials

Unloading of materials

Loading or unloading of Transformer upto 100 KVA

Erection of New Transformer all capacities (with jumpering)

Guarding Arrangement

Flat guarding including fixing of 2 Nos. cross arms.

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)

Below 8 Kms (Plains)

Above 8 Kms. For additional Km (Irrespective of weight in tonnage)

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m

Dismantling Charges

Dismantling of PSC/RCC & above 8.00mm

Dismantling of stay set complete

Dismantling of 1ph xarm

Dismantling of 3ph xarm

Dismantling of Tapping X arm/V cross arm

Dismantling of HT/LT TI fitting

Dismantling of 22kV Pin insulator

Dismantling of 22 kV strain disc

Dismantling of LT Pin insulator

Dismantling of LT shackle

Dismantling of Aluminium knob

Dismantling of conductor of size ACSR 7/2.59 /AAAC 7/2.50

Dismantling of conductor of size ACSR 7/3.35 /AAAC 7/3.15

PAINTING:

Painting of metal poles including cross arms (excluding cost of paint)

Numbering of pole with paint and with base painting.

DT/ DP erection

Erection of Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pits with collar including painting of metal parts, structure poles, fixing of top channel, seating channel, belting angle including concreting (Except erection of Transformer) (Annexure II)

Erection of Single Pole Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel, transformer bed structure including concreting (Except erection of Transformer)(Annexure III)

Erection of D.P.Structure with AB Switch, top channel, cross bracing, earthing, painting, providing stay including concreting

Paving of HT/LT Lines

ACSR 7/3.35mm / AAAC 3.15mm Rabbit conductor in KM

ACSR 7/2.59mm / AAAC 2.50mm Weasel and ACSR 7/2.11mm conductor in KM

MISCELLANEOUS WORKS

Releasing of HTs wire from PSC Pole

JAYA CONTRACTOR