SPL REPAIRS TO ROAD FROM ASHOKA CIRCLE , VIJAY AUDITORIUM, ACADEMIC BLOCK, PE AND FC STORE,SMC- RAJYAVARDHAN STADIUM AND P-32 OLD PT STORE AT OTA GAYA

Amount

M&L for scarifying or picking gravelled exc. 50mm but n.exc. 50mm but n. exc. 100mm deep, macadam or bituminous macadam surfaces in area exc. 400 Sqm complete all as directed.

M&L for 75 mm thick (Compacted thickness) WBM with course aggregate of granite trap or basalt of gading 2 (63 to 40 mm size) or grading 3 (50 to 20mm size) spread rolled and consolidated with 8-10 tonne power rolled to gradient materials and camber required complete all as directed.

M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all dirt and loose material applying evenly a tack coat with paving bitumen VG-10 @ 10kg/ 10Sqm of road surface, laying Semi dense bituminous premix asphaltic concrete 40mm thick consolidted thickness with 5.5% binder content of bitumen VG-30 by weight of total mix laid using mechanical paver, and rolled to a uniform smooth surface with 8 to 10 ton power road roller to required camber and gradient, complete all as directed.

M&L for applying a tack coat of paving bitumen VG-10@ 5Kg / 10 Sqm of road surface complete all as directed.

M&L Premix bituminous macadam laid, rolled and compacted to required gradient and camber (consolidated thickness 50 mm or less) with paving bitumen VG-30 complete all as directed.

M&L for preparing old existing black top surfaces by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all dirt and loose material applying evenly a tack coat with paving bitumen VG-10 @ 5Kg / 10 Sqm of road surface, laying semi dense bituinous premix asphaltic concrete 30 mmm thick consolidated thickness with 5.5% binder content of bitumen VG-30 by weight of total mix laid using mechanical paver, and roller to a uniform smooth surface with 8 to 10 ton power road roller to required camber and gradient, complete all as directed.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as directed

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as directed

Material & Labour for preparing bituminous surfaces of road and marking 1.0 mm thick centre line /stop lines /dashes, arrows etc. and the like n exc 10cm width on road pavements with hot thermoplastic road marking paint of approved colour conforming to BS-3262-1989 with special applicator machine all as per manufactures instruction complete all as directed

Dismantiling of machine pressed precast concrete interlocking paver block of any shape, any size and laid dry or laid dry and pointed in any mortar complete all as directed

Laying of machine pressed precast interlocking paver block of any shape, any size (except tiles) with sand cushioning at same or other location with proper slope complete all as directed. (Note :- Old sand to be used after screening & cleaning).

M&L for one coat of glazed lacquer resin and hardener paint (polyurethane) (Make : Granotone) including prepration of old painted surfaces on brick, stone concrete, asbestos cement or plaster surface of any discription over10cm girth not otherwise described. complete all as directed

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). complete all as directed

M & L for 75mm thick cement concrete tyepe D-2, 1:4:8 using 40mm graded stone aggregate as in subbase complete all as directed

M & L for sand filling under floor or in foundations including watering and consolidation complete all as directed

M & L for machine pressed precast concrete interlocking paver block coloured rubber moulded, lacuered finish any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as directed.

M& L for cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in copings, kerbs and like including weathering, slightly rounded or chamfered angles and throating complete all as directed

M&L for preparing old existing black top surfaces by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all dirt and loose material and applying evenly a tack coat with paving bitumen VG-10 @ 5Kg / 10 Sqm of road surface, laying semi dense bituinous premix asphaltic concrete 30 mmm thick consolidated thickness with 5.5% binder content of bitumen VG-30 by weight of total mix laid using mechanical paver road roller to a uniform smooth surface with 8 to 10 ton power road roller to required camber and gradient, complete all as directed

M & L Premix bituminous macadam wirh 4% binder content by wt of total mix laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as directed

Material & Labour for preparing bituminous surfaces of road and marking 2.5mm thick centre line /stop lines /dashes, arrows etc. and the like n exc 10cm width on road pavements with hot thermoplastic road marking paint of approved colour conforming to BS-3262-1989 with special applicator machine all as per manufactures instruction complete all as directed

M & L for Precast factory made cement concrete solid blocks for road edging exc 10 cm in width and setting in CM 1:6 type B1 1:2:4 continous on both sides of road complete including necessary excavation embedding blocks in the ground to required depth, tamping around and removing surplus spoil and deposited to a distance not exceeding 50m complete all as directed

M/s Vinay Kumar (BID ID -3268649)

M/S ABHAY KUMAR AND BROTHERS (BID ID -3264120)