REPAIRS TO HARDSTANDING COMPOUND WALL FENCING GATE DRAIN FOOTPATH AND MISC WKS AND CLEANING AND REPAIR OF SEWAGE LINE MANHOLES SEPTIC TANKS AND SOAKAGE WELLS OF INSP ORGN AT AUNDH AREA UNDER GE MH AND RH KHADKI

Amount

Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar complete all as specified

M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate ) masonary with solid blocks, exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

All as per item No 2 above but except block recovered from demolition complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 complete all as specified and as directed.

M&L for preparation of new undecorated surface of wall and applying two coats of cement base paint over a coat of primer.

Dismantling fencing, wire mesh any type complete all as specified and directed by Engr in Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed by Engr-in-Charge

S&F Mild steel for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

M&L for cement concrete in foundation PCC 1:3:6 type C2 using 40mm graded stone aggregate for fencing post etc.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

S&F in repairs galvanised 2 strand barbed wire 2.24mm dia of wire and 2mm dia of barbed at 75mm spacing and straining and fixing to any type of strandre nails straining bolts, including securing or tying at crossing with and provn of galvanised MS wire staples or steel pins etc as specified.

All as per item No. 14 here in before but restraining resecuring old fence including making good staples etc only all old wire fit for reuse as directed.

S&F in repair framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165

Dismantling structural steel work including doors, gates but excluding framed truss etc.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old Roof sheet CGI/ PGI Sheet as specified and directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old roof sheet CGI/ PGI Sheet complete all as specified and directed.

M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level)

M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75 mm thick sub base or similar items complete all as specified and directed.

M&L fo Sand filling under floors or in foundation including watering and consolidation

M&L for 80mm thick coloured rubburised, glossy finish machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-40 Grade incl complete all as specified and directed by Engineer-in Charge.

S&F Pre Polished Chequered cement concrete tiles glossy and rubburised finish 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in CM 1:6 under tiles incl complete all as specified and directed by Engineer-in Charge.

M&L for PCC 1:3:6 type C-1 , 75 mm thick as in plinth protection, Path, floor complete all as specified and directed.

Taking down PVC (SWR) pipes 75 mm dia single sockets and S&F in any length rubber ring joints, laid in trenches or in floor complete all as specified and directed.

M&L for Cement concrete type B2 (1:2:4) 40 mm graded aggregate as in surface channels and drains complete all as specified and directed.

Extra for fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc.

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc.

M&L Coloured Glazed ceramic tiles engraved textrure type or plain in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick plastering in cm 1:4 complete all as specified.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete fixed over and including backing coat of 10mm thickin CM 1:4 complete all as specified

Excavation in trenches n exc 1.50m wide and 1.50m depth for foundation, man hole etc and getting out in hard/dense soil.

Returing filling in including spreading leveling watering well ramming in layers n;exc 25cm thick with soil obtained from excavation

Removing excavated material exc. 250 m but n.exc. 500m and depositing where directed

Demolition of cement concrete (unreinforcement) in ground floor and paving n exc 15cm thickness (below and above ground level) of any description and in any position

Demolition of precast RCC as in cover slabs etc.

M&L for PCC 1:4:8 type D-2 (40 mm gde agg) as in concrete bed to drain pipes

All as item No. 8 as above but dia of pipe is 200mm

S&F of Reinforced concrete pipes of 150mm dia, class NP2, laid and jointed complete with collars complete all as specified.

S&F of Reinforced concrete pipes of 200mm dia, class NP2, laid and jointed complete with collars complete all as specified.

M&L for Cement concrete type C2 1:3:6 (40mm graded stone aggregate) in surface channels and drains complete all as specified

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor.

S & F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor.

S&F in repairs of Vitreous China Urinal, half stall type, white complete including CP waste coupling, CP spreader etc all as specified.

M&L in repairs PVC(SWR) gully trap 125/100 mm, setting and joined with solvent cement etc

S & F in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings i.e float valve, syphon, flushpipe,brackets all as specified and directed by Engr-in-Charge

Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories)

S&F of PVC (SWR) pipes of 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors/ wall all as specified

S&F of PVC (SWR) pipes of 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors/ wall all as specified

S&F of PVC (SWR) bend of 75mm radius all as specified

S&F of PVC (SWR) bend of 110mm radius all as specified

S&F of 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal

S&F of 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified

M & L for PCC 1:3:6 type C1 (uisng 20mm graded aggregate) 75 mm thick as in Plinth, Path, floor with fair finish surface with out using extra cement all as specified.

M&L for PCC 1:4:8 Type D-2 (40mm graded agg) as in foundation, filling complete all as specified .

M&L for PCC 1:3:6 type C-1 (20mm gde aggregated) as in coping including necessary formwork complete all as specified & directed by Engineer in charge.

M & L for Pre-cast RCC 1:2:4 mix, type B1 using (20mm graded aggregad) as in cover slabs including necessary formwork set in CM 1:4 complete all as specified and directed. Note :Reinforcement shall be measured and paid separately .

M&L TMT 10mm and over bars cut to length, bent to shape required including cranking, bending, hooking ends, and binding with mild steel wire not less than 0.9 mm dia confirming to Fe 410-0 or Fe 410-S

M&L for Cleaning of all blockage of any type of trap, water closet, soil waste/ vent pipe, gully traps upto first manhole by removing all chockage and removing the same to a distance exceeding 100m and not exceeding 200m and making good the distrurbed surfaces as per existing where required all per directed by Engr-in-Charge

Cleaning of existing manholes of any size and depth and removing all semi solid or solid material of any description and cleaning the manholes from inside complete with water etc complete all as directed by Engr-in-Charge

Cleanng of existing 150mm dia sewage line upto 1.00 m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid/semi solid /solid sludge etc coming in the next manhole is removed and then the line is cleaned with water complete for effectve functioning complete all as directed by Engr-in-Charge

All as per Item No 64 above but 150 mm dia bore but depth exc. 1.0m below ground level complete.

All as per Item No 64 above but 200 mm dia bore but depth upto 1.50m below ground level complete.

Cleaning of storm water drain with necessary measures and removing obtain material from drain exc. 250 m but n.exc. 500m and depositing where directed

Mechanically pumping out sewage water from sump well where required and as directed with taking precautionary measures including tools and plants as required and removing to a distances exc 50m but not exceeding 100m from the site (working in foul condition) complete all as specified and directed

Cleaning and de-sludging of existing septic tank/ deep manholes upto 3mtr deep including taking out sludge in any form alongwith all other foreign materials by mechanical equipment or manually or by way of any other suitable means including removal of sludge and other foreign materials out side the MD land by any means complete (working in foul condition) complete all as specified & directed.

SAMBHAJI D JARANDE (BID ID -3091084)

Sunrise Traders (BID ID -3091035)

A B S ENTERPRISES (BID ID -3096188)

Shri Sant Cosntruction (BID ID -3091222)

shree ram enterprises (BID ID -3094888)

L.K.R.TIWARI CONSTRUCTION (BID ID -3091048)

M/S K.D.MATE (BID ID -3091169)

S.R.M.K Enterprises (BID ID -3086818)