Spl Repair to Bldg No NB 06, 07 and 10 of AMC C AND C under GE (East) Lucknow.

Amount

Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering in cement mortar (1:6), 10mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @ 3 % by weight of cement on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed (WPC measured and paid separately)

M&L 5 mm thick rendering in CM (1:3 ) on ceiling surfaces finished fair and even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed.

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed

M&L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed.

M&L for Non skid matte finished ceramic coloured floor tiles shade as approved size ( 300 x 300mm) x 7-8mm thick set on 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to match complete all as specified and directed

M&L for matte finished glazed ceramic colour tiles of size 600x300mm x 7-8mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over 10mm thick rendering in cm 1:4 all as specified and directed.

M&L for coloured disigner vitrified ceramic tile flooring of size 600x600x7-8mm thick as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item No-11 above but as in vertical surfaces as in dado/skirting with and incl 10 mm thick rendering in CM 1:4 complete all as specified and direceted.

Taking down steel tubing and connection 15m bore incl cleaning for refixing or removing from site all as specified.

Ditto all as in item 13 above here in before but 20 mm dia pipe complete all as specified and directed.

M&L GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and floor all as specified.

Ditto all as in item 15 above here in before but 20 mm dia pipe complete all as specified and directed.

Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, complete all as specified and directed.

Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, complete all as specified and directed.

Labour for cutting and chaseing in brick wall for concealed GI tubing and making good n.exc 10 cm in girth complete all as specified and directed.

M&l for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down 100mm / 75mm dia AC rain water pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall with & including existing / new PVC clamps complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall with & including existing / new PVC clamps complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints, laid, laid in trenches and floors complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints, laid in floors or trenches complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F in repair vitreous China, table top, wash hand basin of size 600 mm x 435 mm x 180 mm, fancy type including 32 mm dia waste coupling and waste pipe complete all as specified and directed.

S & F in repair vitreous china pedestal pan EWC (Couple Closet Bowl) of size 370 x 640 x 760 mm including UF seat cover, hinges, S trap-220 mm, accessories set etc and vitreous china ware flushing cistern of

S & F in repairs CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed.

S & F in repairs CP brass telephonic type wall mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed.

S&F CP brass 15mm fancy type telephonic shower rose suitable for connecting with wall mixture with necessary hook fixed as in repair

S&F long body bib cock fancy type 15mm dia chromium plated with crutch buterfly handle,serewed down,screwed for MS pipe or for brass ferrule

S&F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe

S&F in repair 75 mm dia CP OH shower rose fancy type with adjustable arrangementfixed as in repair

S&F CP brass soap dish fancy type all as specified fixed as in repair

S&F health facuat for EWC CP hand hold with flexiable pipe,bracket etc complete set of superior quality

S&F CP brass toilet paper holder all as specified fixed as in repair

S&F Towel rack 20mm dia with brass chromium plated 600mm long fixed as in repair

S&F in repair towel ring 200 mm dia and made out of 8-10 mm dia hollow tubes superior quality complete all as specified and directed.

S&F in repair Glass shelves fancy type 8 to 10 mm thick glass 550 mm long complete all as specified and directed.

S&F in repair glass corner shelves fancy type 6 mm thick 225x225 mm size complete all as specified and directed.

S&F in repair 15mm bore PVC connection 600mm long with brass/PVC coupling and washer as directed.

Dismantling / taking down existing unserviceable RCC/PVC water tank and S&F 500 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position complete all as specified and directed.

S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed.

S&F in repair 20mm bore Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area n. exc 1.5 Sqm each complete with hold fasts etc complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed.

S&F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. incl filling cement concrete type C-1 (1:3:6) filling and compaction in frame complete, all as specified.

S&F 125x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast(40x3mm) etc.bincl filling cement concrete type B-1 (1:3:6) filling and compaction in frame complete all as specified and directed.

M&L for 30 mm thick flush shutters, solid core construction, with block board 3 core and plywood face panels, both faces are covered with decorative face veneer lamination with lipping/frame as approved to match complete all as specified.

S & F PVC door frames (single rebated) of size 60mm x 30 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer intergral skin with suitable metal CSK screw complete all as specified and directed. (Note : Door Frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly fora long life).

S & F factory made solid PVC profile panel door shutter 28mm thick (style) with internal skin as frame and 3 mm thick presuure compact laminate on both sides of approved color as infill with C channel type GI or 40x20x19 mm of MS pipe as stiffener and fixing in frame complete all as specified and directed.

S&F fancy type 300 mm long Aluminum alloy, anodised sliding door bolts ISI marked, plate type, ,and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed.

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section ISI marked complete all as specified

S&F 150mm long alluminium handles ISI marked, cast type, anodized and fixed complete all as specified and directed.

S& F 100 mm size butt hinges, medium weight, stainless steel, and fixed with ss screws complete all as specified and directed.

S&F in repair 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S & F stainless steel handle, 150mm size with smooth finish matching the requirment of relevant is code as approved by engr-in-charge complete all as specified and directed.

S & F stainless steel auto closing hinges fixed with screw to timber/pvc frame work complete all as specified and directed by Engineer-in-Charge.

S&F PVC Cupboard with frame and shutter in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick pvc sheet & all required brackets 5.5screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finishincl all necessary fitting as per site requitment as per make and specification mentioned as per drawing and all are specified and directed by Engineer-in-charge on site.

S & F powder coated aluminum Window sliding type three track with glazed and gauzed shutter (incl stainless steel wire cloth 0.36 mm nominal dia and 1.40 mm apreture and 3.8 mm thick plain glass) on wheel consisting frame of size 100 x 44 (sliding shutter consist of suitable size of section as specified and directed) with locking arrangement as approved fixed with rubber gas ket and aluminum beading etc including necessary cutting hole in wall fixed complete all as directed.(Note-glazed shutters glass thickness not less than 3.8 MM and wiremess shutter with SS wiremesh as approved by GE is also included. No payment will be made separately)

S&F in repair aluminum Anodised grills of aperature 75 mm and fixed in frame of window and ventilator including necessary fixing arrangement etc complete all as directed

Providing and fixing anodised aluminium fully glazed sliding door shutters using 1.5mm thick standard door aluminium section having size of styles,top rail 83x44mm ,where as bottem rail will be made of 110x44mm make Jindal/Hindalco incl necessary jointing cleats,glazing clip,rubber packing,aluminium snap beeding,screw etc anodised aluminium fittings such as 150mm long 3 No aluminium butt hinges B-21 type and 1 No aluminium tower bolt 200mm long (vertical type ) and glazing will be done by 4mm thick plain glass of any approved shade all as specified and directed.

Providing and fixing anodised aluminium frame of section 100x44x1.60mm to 1.50mm thick fixed with rawal plugs and screw or wire expansion hold fasteners make as approved by GE.

S&F in repair 20 mm dia heavy duty stainless steel hanging rod with end brackets and fixed with screw complete all as specified and as directed

S&F in repair 25 mm dia stainless steel curtain rod including SS brackets, SS fancy type end knob and SS wall to wall knob complete all as specified and directed.

S&F rubber beading 50 mm wide and fixed to door. Completed all as directed/specified

Hacking out old borken glass any thickness size, quality or description for wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F in repair 4mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in squire not exc 0.5 sqm each panes as directed.

S&F in Repair Stainless steelwire cloth 0.56mm minimal dia of wire and average width of aperture 1.18mm fixed with stanless steel staples to windows.

S&F in repair 300mm MS ordinary rat tail pattern spring including roller & roller plate complete as directed.

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral water proofing Chemical PIDI PROOF-LW mixed in proportion 200ml /50 Kg cement of DR Fixit of of pidilite industries Ltd or STP No.1 (liquid) of STP Ltd in proportion 200ml/50 Kg cement as in padding on roof surface for correcting/ making proper slope on roof, surface finished fair and even without using extra cement complete all as specified and directed.

M&L for Brushing neat cement slurry @ 3 Kg per Sqm mixed with super Latex (Dr. Fixit of pidilite Industries Ltd) or SBR Latex of STP Ltd. In ratio 1:4.7 (as per manufacture's instructions) for bond between old and new concrete under the anti seepage work complete all as specified and as directed.

Taking down existing treatment any type/any thickness on roof including taking down/removing the backing bed concrete if any and dispose off at a distance exc 100m as directed etc complete all as specified and directed

M&L for brushing neat cement slurry with 3.0 Kg./Sqm over roof slab complete all as specified and directed

M&L PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof padding/ roof kerbs / benching / coved fillets etc rounded or chamfered on edges, smooth surfaces complete, all as specified and directed.

M&L for treatment of foyer roof with reinforced elastomeric liquid waterproofing membrane of 400 - micron thickness in four layer (100 micron each layer ) having SRI of 1 30, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371, respectively). The coating should have water absorption less than 1% as per IS- 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 00 as per IS (P-7/Sec-3) 1990 having VOC less than f g /ltr as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 2.5 bars of pressure of 7 days. It should also be resistant to Ammnonia solution, Sodium nitrate, Sodium hydroxide, along with water an soap solution as per IS : 101 (P-7/Sec-2) 1990.

The waterproofing membrane will be laminated with 25-40 mircron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS : 101 (P-8/Sec 6) 1993 and also should pass impact test as per IS : 101 (P-5/Sec-2 ) 1988 along with having dust and water repellent & anti graffiti property passing scratch hardness test of 500g as per IS : 101 (P-5/Sec -2 ) 1988. The polymeric coating should have a self cleaning and easy to clean property with excellent weather stability and DPR (Dirt pickup ratio ), surface preparation includes pressure wash cleaning to remove all dust, fungus, etc. The work will be done under the supervision of the Engineer -in-Charge by Graco airless machine. The coating thickness and the methodology of appplication shall strictly be carried out by the authorised vender/ manufacturers with all specifications and as approved by the Engineer -in-Charge. The Manufacturer shall give a guarantee for the performance & durability for 10 years.

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples all as specified and directed.

Demolition of cement concrete (reinforced) Concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20mm graded stone agg in RCC lintel, shelves,hold faste etc. with necessary form work complete all as specified.

M&L for RCC (1:2:4) type B1, using 20mm graded stone aggregates as in precast RCC manhole cover and set in CM (1:4) all as specified and as directed by Engineer-in-Charge.

M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) rough finished surfaces of concrete flat all as specified.

M&L 8mm dia TMT bar cut to length bend to shape as required,incl cranking, hooking and binding with steel wire complete all as specified and directed.

M&L for 16 to 18mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edge of stone slabs one edge complete all as specified and directed.

Demolion of brick work built in cement mortar including finishes complete all as specified and directed.

M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridge complete all as specified and directed.

S&F Pre - painted galvalume aluminum zink coating GI based corrugated steel sheeting 0.50 mm thick of an color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified

M&L 75mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate ) as in floors / pavings complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality laid over and including 50mm thick sand cushioning vibrated with mechanical vibrator complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer over Birla white wall putty of average thickness 1mm after complete removal of existing treatment on old/ newly plastered surface including necessary preparation complete all as specified and directed.

M&L preparation of old plastered of wall surfaces and applying two coat of white wash complete all as specified and directed.

M&L preparation of newly plastered wall surfces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered ceiling surface and applying two coats of white wash complete all as specified and directed.

M&L preparation of old wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete as directed.

M&L preparation of Old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M&L for preparation of new steel and iron surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.

M&L for waterproof cement based putty @ 1 Kg (undiluted ) per Sqm of average thickness 1 mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI complete all as specified and directed.

M&L for one coat of acrylic water based exterior grade primer @ 0.9 Ltr (undiluted )/10 Sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram / litre as per the LEEDS specifications, anti fungal properties in two coats @ 1.79 Ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Note for item No 107 to 109 above (a) The work pertaining to periodical services & water proofing shall be executed from authorised applicator through manufacturer of which the materials i.e Paint, Distemper, Cement base paint, putty etc is proposed to be used by the contractor and approved by Garrison Engineer.

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 50mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.

M & L for writing letter or figured (Block, Roman, Italic or Indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed.

M & L for dismantling loose / disintegrated portion of RCC chajjas, bend shelves beams balconies and similar work at any position or any height and dubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm garded stone aggregate to make up and finished required shape including applying anti corrosive paint on expoased surface and provision of neccessary supporting form work snd including 10mmm thick plastering in CM 1:4, finished fair and even complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per serial item No 113 here-in-before but one bell point controlled by one bell push, 06 Amp.

All as per serial item No 113 here-in-before but one, two way light point controlled by two, two way switches, 06 Amp.

All as per serial item No 113 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 113 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Serial Item No 113 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

S&F in replacement Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed

S&F in replacement Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed

S&F in replacement Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed

S&F in replacement Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed

S&F in replacement Modular White cover plate with frame,8 module complete all as specified and as directed

S&F in replacement Modular White cover plate with frame,4 module complete all as specified and as directed

S&F in replacement Modular White cover plate with frame,3 module complete all as specified and as directed

S&F in replacement Modular White cover plate with frame,2 module complete all as specified and as directed

S&F in replacement Modular Metal flush box 8 module complete all as specified and as directed

S&F in replacement Modular Metal flush box 4 module complete all as specified and as directed

S&F in replacement Modular Metal flush box 3 module complete all as specified and as directed

S&F in replacement Modular Metal flush box 2 module complete all as specified and as directed

S&F in replacement Calling bell , AC, 230 Volts, single phase complete all as specified and as directed

S&F in replacement bell push , AC, 230 Volts, 2 module complete all as specified and as directed

S&F in replacement telephone socket 1 module complete all as specified and as directed

Supply and fix in replacement of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9/10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed.

Supply and fix in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed.

Supply and fix LED tube light fittings 1200 mm,20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminum housing enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix LED tube light fittings 600 mm, 10 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminum housing enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Supply and fix in replacement of AC modular box with modular 20 Amp MCB SPN suitable for Geyser and AC complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos.

Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fix in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

Taking down carefully ceiling fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody of AGE E/M Yard-II for BER procedure complete all as specified & directed.

Supply and fixing of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, working pressure min 0.8 Mpa with ,multi function safety valve and PUF insulation including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, water connection complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote oprated all as specified and directed by Engr-in-Charge

S&F exhaust fans, plastic body, ac, single phase, 230/240 v of size 200 mm sweep with louver and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed

Supply and fixing in replacement LED Bldg security light fitting LED 45 watt with SPD, PF not less or equal 0.9,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & IP 66 incl with bracket, clamps, nuts, bolts protection complete all as specified and directed and directed.

Cutting walls any type, making holes for fixing of exhaust fan of any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed.

Excavation in trenches soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as directed & specified

M & L Returning filling in including spreading leveling watering and well ramming in layers each not exceeding 25 cm thickness complete all as specified and as directed

M & L Removal of surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. i.e 18 cm punned down thick shall be considerd for mesurement)

M & L Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified

suniltraders (BID ID -3280099)

QUALITY CONSTRUCTIONS CO (BID ID -3281952)

jayanti associates (BID ID -3289088)

rajan construction (BID ID -3285111)