Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.4 LAccepted-Finance | L1 | Accepted-Finance As per BOQ | |
| 2 | L2₹32.1 L+₹1.7 L (5.55%)Accepted-Finance | L2 | Accepted-Finance As per BOQ | |
| 3 | L3₹33.1 L+₹2.7 L (9.03%)Accepted-Finance | L3 | Accepted-Finance As per BOQ | |
| 4 | L4₹34.0 L+₹3.6 L (11.8%)Accepted-Finance | L4 | Accepted-Finance As per BOQ |
Tender Value
₹31.0 L
EMD Value
₹62,070
Closing Date
12 Dec 2023, 11:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SO-1 (Wks)
HQ 9 Sect AR, Keithelmanbi
Additional/Alteration to existing Bldg No P/80/467 (Guest rooms) and P/T-V/01 (Type V qtr) of HQ 9 Sect AR
2023_ARMHA_782020_1
9 Sect/Engr/Addl/2023-24/13
Open Tender
Civil Works
Works
270 days
HQ 9 Sector Assam Rifles, Keithelmanbi
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
DIG Assam Rifles
₹62,070
16 Jan 2024
21 Nov 2023
13 Dec 2023
21 Nov 2023
12 Dec 2023
21 Nov 2023
21 Nov 2023 - 12 Dec 2023
Amount
SCHEDULE `A' PART-I (ADDN/ALTRN TO GUEST HOUSE BLDG NO. P/80/467)
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : of sectional area below 40 square centimetres
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq. metres and below
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls,flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.
Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Kiln seasoned and chemically treated hollock wood.
Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm thick Cement fiber board as per IS: 14862
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m²
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m²
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs ordash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on bothfaces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202(Part I) On one side only Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :Kiln seasoned and chemically treated hollock wood
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987,Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal levelsuspended on interlockingmetal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 4x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. (Make: Asian Paint/ Nerolac/ Dulux/ Berger Paint or equivalent quality approved by Engr-in -Charge).
Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. (Make: Asian Paint/ Nerolac/ Dulux/ Berger Paint or equivalent quality approved by Engr-in -Charge).
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.One or more coats on old work. (Make: Asian Paint/ Nerolac/ Dulux/ Berger Paint or equivalent quality approved by Engr-in -Charge).
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats on new work. (Make: Asian Paint/ Nerolac/ Dulux/ Berger Paint or equivalent quality approved by Engr-in -Charge).
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. (Make: Asian Paint/ Nerolac/ Dulux/ Berger Paint or equivalent quality approved by Engr-in -Charge).
Wirig for light point/ fan point/exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulted copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box amd earhing the point with 1.5 sq.mm FRLS PVC insulted copper conductor single core cable etc. as required. Group C. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge). .
Wiring for light/ power p;ig wh 4x4 sq.mm FRLS PVC insulted copper conductor single core cable in surface/ recessed mediu,m class PVVC conduit alongwith 2 Nos. 4 sq.mm FRLS PVC inslulted copper conductor ingle core cable in surface/ recessed medium class PVC conduit as required. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplying and fixing of the modular switch box of size 100mx 100mmx 60mm deep of medium class PVC conduit along with accessories in surface orin recesswith suitable size of phenolic laminated sheet cover in front including painting etc. as required . (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplying and fixing of the modular switch box of size 150mx 150mmx 60mm deep of medium class PVC conduit along with accessories in surface orin recesswith suitable size of phenolic laminated sheet cover in front including painting etc. as required . (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplying and fixing of the modular switch box of size 75mx 75mmx 60mm deep of medium class PVC conduit along with accessories in surface orin recesswith suitable size of phenolic laminated sheet cover in front including painting etc. as required . (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplyng and fixing 5/6 aamp modular Switch on the exsting modular pate & switch box including connections but excluding modular plate etc. as required. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplyng and fixing 15/16 aamp modular Switch on the exsting modular pate & switch box including connections but excluding modular plate etc. as required. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Installation, testing and commissioning of pre-wired, flourecent fitting/compact fluorescent fitting of all typs, compete with all accessories and tube/ lamp etc., including supplying and fixing ball and socke arrangement, 2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm lenth, painting and wiring the down rods and conections with 1.5 sqmm FRLS PVC insulted, copper conductor, single core cable and arthing etc. as required. (LED fittings shall be supply by the Dept free of cost)
SCHEDULE `A' PART-II (ADDN/ ALTN TO GUEST ROOM TO TYPE-V QTR BLDG NO P/T- V/01)
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge in all kinds of soil
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Charge in all kind of soil
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Form work: Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers.
Edges of slabs and breaks in floors and walls Lintels, beams, plinth beams, girders, ressumers and cantilevers with water proof ply 12 mm thick
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
15 mm cement plaster on the rough side of single or half brick wall of mix :15 mm cement plaster: 1:4 (1 cement: 4 fine sand)
Supplying, spreading and compacting stone aggregate of 40mm nominal size in uniform thickness, hand picking, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Providing and laying vitrified floor tiles of size 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Make: Kajaria/ Somany/ Orient Bell /Cera/ Johnson/ Vermora or equivalent quality approved by Engr-in -Charge).
Providing and laying Vitrified tiles of any sizes (thickness to bespecified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, dados, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints. (Make: Kajaria/ Somany/ Orient Bell /Cera/ Johnson/ Vermora or equivalent quality approved by Engr-in -Charge).
Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. (Make: Asian Paint/ Nerolac/ Dulux/ Berger Paint or equivalent quality approved by Engr-in -Charge).
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats on new work. (Make: Asian Paint/ Nerolac/ Dulux/ Berger Paint or equivalent quality approved by Engr-in -Charge).
Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubularsections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per rchitectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion, Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubularsections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per rchitectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately), Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.Pre-laminated particle board with decorative lamination on both sides
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the rchitectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm)
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter. (Make: Supreme/ Ashirvad/ Finolex/ Prince or equivalent quality approved by Engr-in -Charge).
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter. (Make: Supreme/ Ashirvad/ Finolex/ Prince or equivalent quality approved by Engr-in -Charge).
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing notless than 170 gms
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Exposed on walls PN - 16 Pipe, 20mm OD (SDR-7.4). (Make: Supreme/ Ashirvad/ Finolex/ Prince or equivalent quality approved by Engr-in -Charge).
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Exposed on walls PN - 16 Pipe, 25mm OD (SDR-7.4). (Make: Supreme/ Ashirvad/ Finolex/ Prince or equivalent quality approved by Engr-in -Charge).
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore. (Make: Cera/ jaguar/ Prayag/ Hindware/ Parryware or equivalent quality approved by Engr-in -Charge).
Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore
Wiring for light point/ fan point/ eshaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulted copper conductor single corre cabel in surface/ recessed steel conduit, with pioano type switch, phenolic laminated sheet, suitable size MS bos and earthing the point with 1.5 sq.mm FRLS PVC insulted copper conductor single core cable etc. as required. Group A. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Wiring for light/ power plug with 2x4 aq.mm FRLS PVC insulted copper conductor single coree cable in surface/ recessed stee; conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulted coper conductor single core cable for loo earthing as reuired (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplying and fixing of PVC switch box 150mmx75mmx60mm deep (normal size on surface or in recess with suitable size as required.
Supplying and fixing the 5/6 A switch modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplying and fixing the 15/16 A switch modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as requirred. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Supplying and fixing 3 pin, 5 A ceilling rose on the existing junction box/ wooden block including connections etc. as required. (Make: Anchor/ Havells/ Legrand/ L&T/ Polycab or equivalent quality approved by Engr-in -Charge).
Installation, testing and commisioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. including supplying and fixing ball and socket arrangement, 2 Nos.down roeds of 20 mm diaX 1.6 mm ythick steel condit up 30 cm lenth, painting and witing the soen rods and connections with 1.5 sq.mm FRLS PVC insulted, copper cnductor, single core cable and earthing etc. as required. (LED lights fitting shall be supply by Dept free of cost.)
MEGHALAYA CONSTRUCTION AND SUPPLY CO.
M/s TOVISHE ACHUMI
M/S PAREEK ENTERPRISES
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .