IMPROVEMENT AND REPLACEMENT OF PETTY REPAIR SERVICES AT SAINIK ARAMGRAH AND SUNJUWAN UNDER GE JAMMU

Amount

Hacking out old broken glass of any thickness, size, quality or description from the wooden / steel frames glazing with putty or fixed with wooden beads complete all as specified and as directed.

Supply and fixing 3 mm thick ordinary glass sheet quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach upto 4 storey building complete all as specified and as directed.

Description all as per Ser item No 2.00 here-in-before but frosted glass complete all as specified and as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 15mm complete all as specified and as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm complete all as specified and as directed.

Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified and as directed.

Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20mm complete all as specified and as directed.

Refixing only 15mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.

Refixing only 20mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.

Material and labour for repairs to steel windows / doors by using welding machine where necessary thickness of each welding spot exceeding 6mm but not exceeding 9mm complete all as specified and as directed at site.

Supply and fixing in repair PVC low level flushing cistern valve less, syphonic action type of 10 litres capacity white with inlet, ball valve, float and handle including cast iron brackets, PVC flush pipe 32mm dia, PVC connection (15 x 450 mm) long complete all as specified and as directed.

Supply and fixing in repair vitreous china squatting pan 'Orissa' pattern size 580x440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe, etc. complete making good to floor as existing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs stainless steel sink with drainage board, made of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets, connecting union to pipe, overall size 915mmx460mm, bowl size (410x330x160mm) complete all as specified and as directed.

Supply and fixing in repair kitchen sink made out of 1mm thick stainless steel sheet with plug washer, waste coupling, waste pipe including bedding in cement mortar, connection to union and drain pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash hand basin white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs brass chromium plated wall mixer with L bend provision over head shower arrangement with connecting legs, wall flanges and wall bracket for hand shower fixing with GI pipes 15mm dia complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated mixer of bore dia of pipe 15mm for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Dismantling PVC water tank / demolition of RCC water storage tanks of capacity upto 1000 litres and removing from site complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified in SSR Part - I and as directed.

Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified in SSR Part - I and as directed.

Supply and fixing in repairs 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram), screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and as directed by Engineer-in-Charge. Note: - Plaster work may be in patches upto triple storey.

Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and as directed.

Material and labour for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick surface finished even and smooth without using extra cement etc. complete all as specified and as directed. (Including all necessary scaffolding, lifting arrangement for external surfaces).

Material and labour for applying two coats of oil bound distemper to newly plastered surfaces including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for applying two coats of cement based paint including preparation of new plastered surface complete all as specified and as directed.

Material and labour for applying three coats of white wash on ceiling including preparation of newly plastered surface complete all as specified and as directed.

Material and labour for preparation of plastered or unplastered surfaces of wall including cornices, pillasters by brooming down or steel wire smoke, root moulds, moss and efflorescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and as directed.

Material and labour for preparation of plastered or unplastered surfaces of wall including cornices, pillasters by brooming down or steel wire smoke, root moulds, moss and efflorescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of white wash on ceiling complete all as specified and as directed.

Material and labour for preparation of plastered or unplastered surfaces of wall including cornices, pillasters by brooming down or steel wire smoke, root moulds, moss and efflorescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of oil bound distemper on old prepared surfaces of walls complete all as specified and as directed.

Material and labour for preparation of plastered or unplastered surfaces of wall including cornices, pillasters by brooming down or steel wire smoke, root moulds, moss and efflorescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of cement based paint on old prepared surfaces of walls complete all as specified and as directed.

Material and labour for preparation of old surfaces and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed.

Material and labour for preparing of old painted surfaces of wood of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of aluminium paint complete all as specified and as directed.

Material and labour for preparation of old concrete surfaces and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) but except brick i.e. using serviceable bricks obtained from Srl item No. 40.00 here-in-before complete all as specified and as directed.

Dismantling floors, hearth or wall tilling including cement mortar bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Description all as per Ser item No 44.00 here-in-before but as in skirting including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for vitrified tiles dark shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 15mm thick in cement mortar (1:4) complete all as specified and as directed.

Material and labour for vitrified tiles dark shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as on vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10 mm thick screed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles 300x450x7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including taking down old plaster and 10 mm thick screed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for granite 20mm thick (Pure black) (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar (1:4) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.

Description all as per Ser item No 50.00 here-in-before above but except stone complete all as specified and as directed.

Supply and fixing 16 to 18 mm thick Dholpur stone for cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 Sqm area fixed with and including one number stainless steel clamps (grade - 202) of flat - 30mm X 2mm, 150mm long made to shape in each slab, making 'V' groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing and including silicon treatment complete all as specified and as directed.

Description all as per Ser item No 52.00 here-in-before but except stone complete all as specified and as directed.

Supply and fixing 20 to 25 mm thick Dholpur stone for cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 Sqm area fixed with and including one number stainless steel clamps (grade - 202) of flat - 30mm X 2mm, 150mm long made to shape in each slab, making 'V' groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing and including silicon treatment complete all as specified and as directed.

Description all as per Ser item No 54.00 here-in-before but except stone complete all as specified and as directed.

Cleaning of old concrete / tiles / granite surfaces, floor / wall surfaces by picking, sweeping clean and washing down with water to remove dust, etc of any height or any description complete all as specified and as directed by Engineer-in-Charge.

Material and labour including preparation of joint for filling in Dholpur / Granite stone flooring in cement mortar (1:3) with pigment of matching colour to existing flooring including removing waste material from site and cleaning of surface complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs chromium plated bib tap 15mm size with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing in repairs bib tap of bore 15mm standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (minimum weight 15mm - 90 gram).

Supply and fixing in repairs chromium plated health faucet with 1 metre long chromium plated flexible pipe complete all as specified and as directed.

Supply and fixing in repairs angle / stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and as directed.

Supply and fixing in repairs towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190 Gram) complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated shower rose 125mm size any colour with or without swivel joints, arm 15mm size 195mm long including fixing to steel pipe or union complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nail complete all as specified and as directed.

Supply and fixing for frame work for ceiling with specification as under mentioned: - (i) GI section frame work (Powder coated) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mmX19mmX0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange 0.33mm thick powdered coated main tee 38mm (Web) X 24mm flange 0.33mm thick. Wall angle shall be screwed / fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm centre to centre to soffits. To from grid of 610X610mm cross Tee shall be provided @ 610mm centre to centre in both directions and all suitable provisions shall be made for fixing the recessed / surface mounting light fittings if any complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing for 4mm thick of size 605X605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 fixed/laid/inserted to GI framework at ceiling with screws complete all as specified and as directed.

Supply and fixing in repairs PVC connection 15mm, 450mm long with nuts and washers complete all as specified and as directed.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 600mm complete all as specified and as directed.

Supply and fixing in repair plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified and as directed.

Demolition of cement concrete in ground floor any thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three parts of sand (all by weight) complete all as specified and as directed.

Material and labour for double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs all as defined complete all as specified and as directed.

Repair to aluminium door including adjusting, necessary bedding, clip, rubber beader, repair to floor door closer complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and as directed.

Description all as per Ser item No 74.00 here-in-before but not exceeding 1.5 Sqm each complete all as specified and as directed.

Supply and fixing anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.

Supply and fixing anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 No in each door hinges, anodised aluminium snap beading screws etc complete all as specified and as directed.

Supply and fixing in repairs anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including anodised aluminium safety grill and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fixing in repairs 5.50 mm thick sheet glass fixing for aluminium doors and windows including 25 micron reflective type sun control film complete all as specified and as directed.

Supply and fixing in repairs aluminium (extruded section) body door closer hydraulically regulated designation No 2, universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 and 60 kg and fixed complete all as specified and as directed.

Supply and fixing in repairs waste coupling of PTMT (half or full threaded) of bore dia 32 mm discharge pipe complete all as specified and as directed.

Supply and fixing in repairs brass phase for chromium plated bib tap, pillar tap, angle valve for suitable 15mm dia full turn, half turn as per sample complete all as specified and as directed.

Supply and fixing in repairs grating doom 100mm dia without hole chromium plated complete all as specified and as directed.

Supply and fixing in repairs grating doom 100mm dia with hole, chromium plated complete all as specified and as directed.

Supply and fixing in repairs PVC waste pipe 32 mm dia and suitable length straight or flexible type for wash hand basin / sink complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated jet spray with complete assembly suitable for EWC pedestal pattern complete all as specified and as directed.

Supply and fixing in repairs floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate as 150mm complete all as specified and as directed.

Supply and fixing in repairs PVC tank cover for water stoarage tank for 500 litre capacity including locking arrangement complete all as specified and as directed.

Taking down eaves, gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed.

Supply and fixing 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.

Supply and fixing 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.

Supply and fixing PVC (SWR) bends of bore 110mm dia complete all as specified and as directed.

Supply and fixing PVC (SWR) bends of bore 75 mm dia complete all as specified and as directed.

M/S PRITHIVI RAJ AND SONS (BID ID -3172434)

M/S VED PAUL MAHAJAN (BID ID -3168518)

M/S RAVINDER SINGH (BID ID -3172533)

M/S Sukhmani Construction Co. (BID ID -3166915)

THAPA TRADERS (BID ID -3172355)

M/S TRIKUTA BUILDERS (BID ID -3171864)