Execution of Contract towards Extension of supply works For capital, DCW and improvement works in Surandai sub-division in Tenkasi Division

Normal ground Excavation of pole pit (1.25m * 0.5m*1.5m) 7.32m, 7.5m, 8m, 8.23m Poles

Normal Ground Erection of 7.32m, 7.5m, 8m, 8.23m Poles

Rocky ground Excavation of pole pit (1.25m * 0.5m*1.5m) 7.32m, 7.5m, 8m, 8.23m Poles

Rocky ground Erection of 7.32m, 7.5m, 8m, 8.23m Poles

Normal Ground Excavation of pole pit (1.25m * 0.6m*1.83m) 9m, 9.14m Poles

Normal Ground Erection of 9m, 9.14m Poles

Rocky Ground of Excavation of pole pit (1.25m * 0.6m*1.83m) 9m, 9.14m Poles

Rocky Ground of Erection of 9m, 9.14m Poles

Normal Ground of Excavation of pole pits (1.25m*0.6m*1.83m) for RSJ pole 36"

Normal Ground of erection of 36" RSJ pole

Rocky Ground of Excavation of pole pits (1.25m*0.6m*1.83m) for RSJ pole 36"

Rocky Ground of erection of 36" RSJ pole

Transporting of poles from road side to pole pit -7.32m, 7.5m, 8m, 8.23m Poles

Transporting of poles from road side to pole pit -9m,9.14m RCC/PSC pole

Transporting of poles from road side to pole pit -36" RSJ pole

Loading and Unloading of Poles-7.32m, 7.5m, 8m, 8.23m Poles

Loading and Unloading of Poles-9m,9.14m RCC/PSC pole

Loading Unloading of poles-36" RSJ pole

Loading Unloading of line materials

Concreting of pole as per Board Standards (2'*2'*5'). The material such as sand, jelly, etc., have to be supplied by the contractor. Cement supplied by contractor (Cement concrete mix 1:4:8 using 40mm hard broken stone including cost of labour charges.for placing Transporting of sant,jally,from box and water curing for 14 days etc,.compleat.

Coping of pole (0.6m*0.6m*0.35m)

Concreting of stay (0.3m * 0.3m * 1.5m) including materials except cement.

Coil earthing per pole & pole earthing

Normal Ground-Excavation of stay pit (1.00m * 0.5m*1.5m) with transporting of materials to site (for Stay Set)

Normal Ground -Erection of Stay Set

Rocky Ground-Excavation of stay pit (1.00m * 0.5m*1.5m) with transporting of materials to site (For Stay Set)

Rocky Ground -Erection of Stay Set

Fixing of V & Channel Cross Arm 3.5' including transporting of materials from road side to site

Fixing of V & Channel Cross Arm 4.5' including transporting of materials from road side to site

Fixing of 3 phase Cross Arm including transporting of materials from road side to site

Fixing of 1 phase Cross Arm including transporting of materials from road side to site

Fixing of HT LT TI Fitting including transporting of materials from road side to site

Erection of HT side arm with stud including transporting of materials from road side to site

Erection of LT side arm with stud including transporting of materials from road side to site

Fixing of insulator (per location) including transporting of materials from road side to site

Fixing of Tapping/Gaurding Channel X Arm

Fixing of 11kV Strain Disc

HT lines Stringing , Sagging, binding including transporting of materials from road side to site for-7/2.59 ACSR (1 Span/wire)

HT lines Stringing , Sagging, binding including transporting of materials from road side to site for-7/3.35ACSR (1 Span/wire)

HT lines Stringing , Sagging, binding including transporting of materials from road side to site for-7/4.09 ACSR (1 Span/wire)

For HT line clear works for 7/2.59 ACSR (1 Span/wire)

For HT line clear works for 7/3.35 ACSR (1 Span/wire)

For HT line clear works for 7/4.09ACSR (1 Span/wire)

LT lines Stringing , Sagging, binding including transporting of materials from road side to site for-7/2.59 ACSR (1 Span/wire)

LT lines Stringing , Sagging, binding including transporting of materials from road side to site for-7/3.35ACSR (1 Span/wire)

For LT line clear works for 7/2.59 ACSR (1 Span/wire)

For LT line clear works for 7/3.35 ACSR (1 Span/wire)

Spilt Neutral Guarding

Flat Guarding

Erection of Transformer /Dismantling of 40kVA/Any sectionaliser

Erection of Transformer/Dismantling of 63kVA, 100kVA

Erection of Transformer/Dismantling of 250 KVA

Erection of feeder cable with open type fuse unit per feeder

Erection of feeder cable with open type fuse unit per feeder and for each addl feeder

Erection of feeder cable Bus bar arrangement with open type

Erection of DT metering

Loading of Distribution transformer below 100kVA

Unloading of Distribution transformer below 100kVA

Loading of Distribution transformer 250KVA

Unloading of Distribution transformer 250KVA

Erection of centre Support ( incl. Concrete)

Plinth Work For DTs upto 250 KVA (1.2mx1.2mx.3m) + (1.2mx1.2mx2m)

Dismantling of Center support

Alteration of clamps

Drilling less than 23 mm holes per hole/slatted hole

Cutting of channel

Cutting of Flat

Cutting of Angle

RSJ Pole Cutting

LT-Changing of pin point to cut point

HT-Changing of pin point to cut point

Erection of service connection materials -Single phase

Erection of service connection materials -Three Phase

Erection of 1*40W tube light complete

Erection street light switching box arrangements

Dismantling of deteriorated poles with concrete in damaged condition including grill separation etc.,

Dismantling of poles without concrete in damaged condition including grill separation etc.,

Dismantling of RSJ poles

Providing jumpering at cut point

Tree clearance in HT or LT location For ordy. Tree clearance and Throng bushes & trees Each Labour /Head/Day

Tree clearance in HT or LT location For coconut Trees and palmrah tree each Labour /Head/Day

Set right of leaning of HT pole including X arms, TI fittings

Set right of leaning of LT pole including X arms, TI fittings

Resagging of Conductor 7/2.59mm

Resagging of Conductor 7/2.59mm with LC

Resagging of Conductor 7/3.35mm

Resagging of Conductor 7/3.35mm with LC

Resagging of Conductor 7/4.09mm

Resagging of Conductor 7/4.09mm

Erection of Tapping Structure ( Double pole) complete as per TNEB standard including painting

Erection of Distribution Transformer double pole Structure complete as per TNEB standard including painting feeders arrangement colour washing of RCC poles etc fixing of poles type to be unit HT/LT LAS and jumbering 3 nos earth pits with earth trough except erection of distribution Transformer

Erection of of 11 KV Single pole Structure including erection of DT complete as per TNEB TNEB standard including painting feeders arrangement colour washing of RCC poles etc fixing of poles type to be unit HT/LT LAS and jumbering 3 nos earth pits with earth trough except erection of distribution Transformer

Dismantling of Stay Set complete including stay rod

Dismantling of Stay set complete Without Stay rod

Dismantling of conductor of 7/2.59 including transporting the conductors to the nearset road side and stocking in coils

Dismantling of conductor of 7/2.59 including transporting the conductors to the nearset road side and stocking in coils with LC

Dismantling of conductor of 7/3.35 including transporting the conductors to the nearset road side and stocking in coils

Dismantling of conductor of 7/3.35 including transporting the conductors to the nearset road side and stocking in coils with LC

Dismantling of conductor of 7/4.09 including transporting the conductors to the nearset road side and stocking in coils

Dismantling of conductor of 7/4.09 including transporting the conductors to the nearset road side and stocking in coils with LC

Dismantling of Transformer structure materials complete set and transporting the same from the location to the road side

Dismantling of V Cross arm

Dismantling of 3 Phase X Cross Arm

Dismantling of Single phase X Cross

Dismantling of HT/LT TI Fitting

Dismantling of HT /LT pin insulators

Dismantling of strain Disc

Painting of Distribution Transformer only

Dismantling of Tapping/Guarding channel X Arm

Providing PA Jumper

Hiring of JCB Upto 2Hours

Hiring of crane Upto 2Hours

Exceeding 1 hour for every Hour

Transporting of charges of DT/line materials using private vehicle upto 20 KM(up and Down)

Beyond 20 KM for every KM

Please Enable Macros to View BoQ information