SPL REPAIR REPLACEMENT OF ASBESTOS SHEETS WITH CGI SHEETS AND ALLIED WORKS UNDER AOR OF GE N MAMUN

Amount

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws including dismantling of existing asbestos cement (corrugated, semi- corrugated, etc) sheets as in roof coverings pattern complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, etc with self tapping screws or J hooks including dismantling of existing AC/ CGI/ translucent (corrugated, semicorrugated, etc) sheets as in roof covering complete all as specified and directed.

M&L for Non asbestos fibre cement building boards 6mm thick in ceiling fixed with screw on MS frame work with drilling screws fixed using T grid/cross-T/Wall angle/level clip and suspenders including three coats of white wash and including dismantling of existing wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

Dismantling timber scantling in fillet, rails, post, rafters, purlins etc under 40 sqcm in section complete all as specified and directed.

M&L for rolled mild steel in angle/Tees for false ceiling, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, rivets etc conforming to Fe- 410W (Gde E-250) quality - A complete all as specified and directed.

M&L for cutting holes in brick walls in cement mortar for inserting/removing angle iron/Tee and making good dismantled portion in cement mortar 1:3 or cement concerte 1:2:4 type B-1 as required in not exc 150 Sqcm complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe -290 Gde E-165, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm, complete all as specified and direcetd.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm, complete all as specified and direcetd.

Material & labour for pressed steel frames 105mmx60mm for doors/windows, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer on exposed surface complete all as specified and directed.

Material & labour for pressed steel frames 125mmx60mm for doors/windows, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) to back of chowkhats, and including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply & fixing 35mm thick factory made 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I) (larger size to be provided), kiln seasoned and chemically pressure treated, fitted to chowkats including two coats of synthetic enamel painting over a coat of pink primer complete all as specified.

S&F 35mm thick 2nd class hardwood factory made glazed and skelton shutters open rebated and prepare to receive glass, guage, etc. (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of member etc; size members of shutters as specified in SSR part I Section-8 clauses 8.24(a); (Larger size to be provided) supplied and fitted to chowkhat including two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Factory made solid PVC Moulded door shutter 28 to 30 mm thick (Stiles) with PVC board core with 2, 4 or 6 raised panel design with 2 mm thick moulded Prelam PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and as directed by Engr-in-Charge.

Supply & fixing of Solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet, edges will be painted to match with prelam sheet, reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.

Supply and fixing box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shuters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts, 150mm long for each leaf and 10mm square bar grills at spacing as shown on Drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks( 1:2:4 Type B-1 using 12.5mm graded crushed stone aggregates) etc all as shown on Drg No CEPZ-TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a shop coat of red oxide primer complete all as specified and directed.

Material & labour for sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with wooden beads/glazing pins in squares not exc. 0.5 Sqm in each pane, complete all as specified.

Supply & fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

Supply and fixing of Butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified.

Supply and fixing of aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

M&L brick work with old size, sub class 'B' brick straight or curved on plan exc 6m mean radius build in cement mortar 1:6 including demolition of existing brick work/stone boulder masonary built in cement mortar including all quoins, arches, pillars, complete all as specified & directed

Supply and fixing of 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

Supply and fixing of 250mm long aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) ISI marked and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Material & labour for reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate for beams, cantilevers, bressummers, lintel over 1.5m span including demolition of existing reinforced cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Material & labour for use & waste of form work to edges of concrete flats, treads, break in floors, window cills, concrete railings openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified & directed.

M&L for TMT bars 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer in Charge.

Material & labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L rendering 10 mm thick on fair faces of brick work, concrete surface in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15 mm thick in CM 1:4 in two layer on brick work surfaces and finishing even and fair (without using extra cement) complete all as specified and directed.

M & L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint mixed with silicon based water repellent compound over a coat of primer by roller/brush, complete all as specified and directed.

Material & labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

Dismantling of rolled mild steel section as in tubular purlins, rafters etc and refixing of purlins, rafters or trusses including necessary cleats and angle including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of rolled mild steel section as in tubular purlins, rafters, angles or trusses including necessary cleats and angles etc complete all as specified and directed.

Supply and fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes incl cleats, angle and plates conforming to IS.1161-1979 grade St.-240 complete all as specified & directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Material and labour for glazed coloured ceramic tiles joint free in vertical surfaces of wall of size 450 x300 x 7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over 10 mm thick rendering in CM 1:4 and finished rough including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified & directed.

Material & labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding. 0.06 sqm but n. exc. 0.11 sqm (300x300mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement over and including screed bed or bedding layers of mortars 20 mm thick in CM 1:6 for laying floor finishes, complete all as specified and directed.

S&F galvanized iron water tubing, ‘medium grade’ 15mm bore, ISI marked with all fittings/pieces such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors including taking up or down existing GI tubing(wall, ceiling, floor etc) with all connections and fittings of 15mm bore, complete all as specified and as directed by Engineer-in-Charge

Supply and fixing in repair 15 mm bore bib taps, fancy type, ISI marked, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing of rotational moulded polyethylene water storage tanks of 1000 litres capacty. (cylindrical, vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I and making connections complete and including dismantling of existing unserviceable water tanks and removing to store of capacity 500 litres to 1000 litres complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed including making connections complete all as as specified and directed.

S&F in repair Vitreous China, wash basin, white, flat back, of size 550mmx400mm including brackets of any size, including pedestal cutting for and pinning in ends of brackets of erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass complete all as specified and as directed by Engineer-in-charge

Supply and fixing in repair 15 mm bore Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

Supply and fixing in repair PTMT Grating of size 100mm dia of (Minimum weight 25gms) complete all as specified and directed

Supply and fixing in repair vitreous Chinaware squatting pan, "Orissa pattern" size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet including provision of lean concrete bedding, making connections to drain out pipe and to flush pipe and anti syphonage pipe etc. complet including making good to floors, complete all as specified.

Supply and fixing in repair PVC valveless, syphonic action type flushing cistern, 10 litres capacity, low level, white with inlet, ball valve, float and handle, including brackets, 32 mm dia PVC long bend flush pipe 90cm long, including necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

Supply and fixing in repair stop valves/Angle cock bore dia 15mm, cast copper alloy, chromium plated, fancy type, ISI marked, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F Urinal spreader of PTMT of any colour for fixing with 15mm dia pipe (minimum weight 60gm) complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia for wash hand basin and urinal complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts or length 450mm complete all as specified and directed.

S&F in repair stainless steel towel rail chromium plated 600mm long complete all as specified and directed.

Supply and fixing in repair over head shower 125mm size for 15mm bore pipe, cast copper alloy chromium plated complete all as specified and directed

Supply and fixing of 100 mm dia bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears with cement joints fixed to walls with all fittings including taking down old existing unserviceable pipe with fitting complete all as specified and directed.

Supply and fixing of 75mm dia bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears with cement joints fixed to walls with all fittings including taking down old existing unserviceable pipe with fitting complete all as specified and directed.

S&F in repairs, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, bore of pipe 100mm, complete all as specified and directed.

S&F in repairs, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, bore of pipe 75mm, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches, ceiling rose , pendents, regulators, socket, lamp holders brackets, bulk head fitting, etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good disturbed surfaces of wall, floors etc all as specified and directed by Engr in Charge

Material & labour for Point wiring using 3x1.5 sqmm FRLS PVC insulated sheathed multistranded copper conductor cable 1100 volts grade (phase, neutral and earthwire) with proper colour coding drawn through and including concealed PVC rigid concealed conduit medium grade (ISI marked) of appropriate size not less than 20 mm dia and 1.5 mm thick and connected to earth dolly with 1.2mm thick GI/MS pressed steel sunken boxes of adequate size and 3mm thick plastic laminated sheet cover fixed with brass screws of suitable size, including cutting chases grooves in walls for concealed wiring for light/fan/bell point controlled by one switch and making good to disturbed surface complete all as specified and directed . Note: 1) Conduit shall be fixed on surface/ ceiling with necessary saddles where concealing of conduit is not feasible. 2) Rate of supplying and fixing GI/MS pressed sunken boxes and 3mm thick plastic laminated sheet cover deemed to be included in quoted rates.

All as per Srl item No. 60 here-in-above but for 5 pin 5/6 Amp socket outlet point on same board controlled by one switch 5Amp one way, complete all as specified and directed.

All as per Srl item No. 60 above but for 5 pin 5/6 Amp socket outlet point on independent board controlled by one switch 5Amp one way, complete all as specified and directed.

All as per Srl item No. 60 above but for one 15/16 Amp socket outlet point concealed using 3x2.5 Sqmm FRLS PVC insulated multi-strand copper conductor wire and making good to disturbed surfaces of wall floor to match existing finishes complete all as specified and directed.

All as per Srl item No. 60 here-in-above but for one light point controlled by two way switch , complete all as specified and directed.

Material & labour for Point wiring using 3x1.5 sqmm FRLS PVC insulated sheathed multistranded copper conductor cable 1100 volts grade (phase, neutral and earthwire) with proper colour coding drawn through existing concealed conduit and connected to earth dolly with sunken boxes including 3mm thick plastic laminated sheet cover fixed with brass screws of suitable size for light/fan/bell point controlled by one switch and making good to disturbed surface complete all as specified and directed

All as per Srl item No. 65 here-in-above but for one light point controlled by two way switch, complete all as specified and directed.

All as per Srl item No. 65 here-in-above but for 5 pin 5/6 Amp socket outlet point on same board controlled by one switch 5Amp one way, complete all as specified and directed.

All as per Srl item No. 65 above but for 5 pin 5/6 Amp socket outlet point on independent board controlled by one switch 5Amp one way, complete all as specified and directed.

All as per Srl item No. 65 above but for one 15/16 Amp socket outlet point concealed using 3x2.5 Sqmm FRLS PVC insulated multi-strand copper conductor wire and making good to disturbed surfaces of wall floor to match existing finishes complete all as specified and directed.

Supply & fixing Switch piano flush type, single pole, 5/6 Amp, one way, AC 230 volts etc complete, all as specified and directed.

Supply & fixing Socket outlet, 2 in 1, 5 pin, 5/6 Amp, flush type, multipurpose, AC 240 volts etc complete all as specified and directed.

Supply & fixing Switch piano flush type, single pole, 15/16 Amp, one way, AC 240 volts etc complete, all as specified and directed.

Supply & fixing Socket outlet 2 in 1, 6 pin, 6 & 16 Amp, flush type, AC 240 volts etc complete, all as specified and directed.

Supply & fixing Switch piano flush type, single pole, 5/6 Amp, two way, AC 240 volts etc complete, all as specified and directed.

Supply & fixing Bell push, flush type, 5/6 Amp, two way, AC 230 volts etc complete, all as specified and directed.

Supply & fixing step type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed by Engineer-in-charge.

Supply & fixing step type electronic fan regulator for BLDC fan flush type on the existing phenolic laminated sheet etc complete all as specified and directed by Engineer-in-charge.

Supply & fixing ceiling rose, PVC/ polycarbonate, insulated body, surface type, bekalite 65mmx50mm, 3 terminals complete all as specified.

Supply & fixing Bell AC, 230 volts, single pole etc complete all as specified.

Supply & fixing lamp holder jumbo modular type, PVC/Polycarbonate type with back plate complete all as specified.

Supply & fixing LED lamp 15 watt suitable for fixing in lamp holder complete all as specified.

Supply & fixing PVC round junction box cover not less than 8cm dia, 0.3cm thick including fixing with suitable size of machine screw complete all as specified.

S&F sub main wiring with two run of 6 Sqmm (2x 6 Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping/ PVC conduit ISI marked with all accessories etc with one run of 6 Sqmm (1x 6 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down old existing submain wiring complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x 6 Sqmm), one run of 6 Sqmm (1x6 Sqmm) cable and one metre of PVC casing caping will be measured as one unit.

Disconnecting electrically, dismantling and taking out old existing light fittings of any size type and keeping in safe custody for resusing serviceable light fittings complete all as specified & directed.

Fixing only light fittings retreived from Srl Item no 84 here-in-above and making electric connections complete all as specified and directed.

Supply and fixing of 1x20W surface/wall mounted box type batten LED ligting having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ lumens/watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED light fitting complete all as specified and as directed.

Supply and fixing of 1x10W surface/wall mounted box type batten LED ligting 2 feet long having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ lumens/watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED light fitting complete all as specified and as directed.

Supply and fixing LED bulk head luminaries 10W integrated electronic driver with system luminous efficacy ≥ lumens/watt operating voltage 140V-240V, IP 65 protection complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED light fitting complete all as specified and as directed.

Supply and fixing LED 2'x2' slim panel 36W, 220V, AC recessed/surface type having white powder coated CRCA housing and high quality diffuser for glare free light with driver and mounting clips suitable for POP/gypsum ceiling and connecting up suitable size flexible copper conductor cable incl making good the disturbed POP surface complete all as specified.

Supply and fixing round/square shaped LED 12Watt recessed type panel, 220 volts AC with Polycarbobnate housing and high efficiency diffuse for glare free light complete with drivers, mounting clips suitable for roof ceiling including connecting up suitabel size flexible copper conductor cable complete all as specified and directed

Supply and fixing round/square shaped LED 18Watt recessed type panel, 220 volts AC with Polycarbobnate housing and high efficiency diffuse for glare free light complete with drivers, mounting clips suitable for roof ceiling including connecting up suitabel size flexible copper conductor cable complete all as specified and directed.

S & F distribution board iron clad, double door with IP-43, 1K-09, protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 c/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCC 3 pole 415 Volts 63 Amps rating with rupturing cap 16 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge.

M&L for SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match existing surface complete all as specified and directed

M&L for SPN MCB DB 4 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match existing surface complete all as specified and directed.

Supply and fixing MCB SP 240V, 50Hz of rating 6 to 32 Amp, 'B' curve using suitable size copper thimbles complete all as specified and as directed.

Supply and fixing MCB SPN 240V, 50Hz of rating 40-63 Amp, 'C' curve using suitable size copper thimbles complete all as specified and as directed.

M&L for GI/MS sunken box 1.2mm thick of suitable size 8"x10" incl cutting chases on wall, flush mounting sunken box and making good the disturbed surface complete all as specified and directed.

M&L for GI/MS sunken box 1.2mm thick of suitable size 7"x4" incl cutting chases on wall, flush mounting sunken box and making good the disturbed surface complete all as specified and directed.

M&L for GI/MS sunken box 1.2mm thick of suitable size 4"x4" incl cutting chases on wall, flush mounting sunken box and making good the disturbed surface complete all as specified and directed.

S&F LED wall security lights of 25 Watt having pressure die cast aluminium housing, IP65 protection, inbuilt electronic driver incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed.

GANDOTRA CONSTRUCTION CO (BID ID -3392405)

Abrol construction co (BID ID -3392472)

M/S SINGH AND ASSOCIATES (BID ID -3392765)

M/S NARESH KUMAR SHARMA (BID ID -3387886)

M/S CANTILEVER ENGINEERS (BID ID -3390994)

M/S SHRI RAM BUILDERS (BID ID -3392208)

D S INFRASTRUCTURE AND DEVELOPERS (BID ID -3392500)

M/S DUGGAL CONSTRUCTION CO (BID ID -3390836)

v k engineers and builders (BID ID -3392603)