Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.2 LAccepted-AOC | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹29.6 L+₹1.6 L (5.82%)Rejected-Finance | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹31.0 L+₹3.0 L (10.8%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹32.8 L+₹4.9 L (17.5%)Rejected-Finance BHAGAT SINGH CHOWK SURATGARH 335804 DISTT SRIGANGANAGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L4 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
29 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalgarh Jattan
GE Lalgarh Jattan
SPL REPAIR TO BLDG NO P-02 AND P-05 AT LGJ MIL STN
2023_MES_616697_1
8934-36/GE/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Lalgarh Jattan
As per tender documents
8 documents required · 8 mandatory
₹500
GE Lalgarh Jattan
₹80,000
Yes
11 Jan 2024
1 Sept 2023
2 Oct 2023
1 Sept 2023
29 Sept 2023
15 Sept 2023
Amount
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc and laided, bedded and pointed in any mortar complete all as specified and directed.
M & L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bedding in cement mortar 1:6, all as specified and directed.
M & L for Machine cut kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from metal frame surrounds, glazed with putty or fixed with beads, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
S&F 3.0mm sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel drapery rods, standarad quality, not less than 28mm dia with heads, brackets and boths ends stainless steel caps , etc. all as specified and direced.
Taking down PVC SWR pipes including fittings and making good distrubed surface with PCC 1:2:4 or CM 1:3 complete all as spedified and directed by Engr-in -Charge.
S&F 110 mm dia bore SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed.
Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawin completed all as specified and directed by Engineer-in-Charge
S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified & directed by Engr-in-charge.
S&F 150mm long aluminium alloy handles, fabricated type, anodised complete all as specified & directed by Engr-in-charge.
S&F for 100 mm long butt hinge, medium weight, cold rolled mild steel all as specified and directed.
S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as directed.
S&F for 300mm long aluminium alloy, anodised, sliding door bolt type not less than 16mm dia fixed all as specified & directed by Engr-in- charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and as directed.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.36 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
M&L glazed ceramic coloured tiles 450 x 300 x 7 mm thick joint less tiles as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed
Dismantling of water tanks of capacity exc 500 and n.exc 1000 ltrs and removing from site all as specified and directed.
S&F 1000 litre capacity ISI marked rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.
S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore all as specified and directed by Engineer-in-Charge.
S&F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (minimum weight 15mm-142 gms/20mm-210 gms/25mm-455gms)
S&F in repair tubular towel rail stainless steel 20mm dia 'D' type 60cm long between flanges complete all as spd & dir by EIC.
S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule all as specified. Note : The minimum weight of tap shall be given in SSR in relevant IS.
S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle, and connection to pipes and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern all as directed.
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests including concrete fixed complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:6 on wall and finished fair even and smooth without using extra cemnt all as specified and directed.
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 on wall and finished fair even and smooth without using extra cemnt all as specified and directed.
M&L for two coats of acrylic distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L for complete removal of existing treatment and two coats of acrylic distemper over 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old plastered or pointed surfaces and applying two coats of white wash complete on wall all as specified and directed by Engineer-in-charge.
M&L for preparation of old plastered surfaces and applying one coat of white wash complete on ceiling all as specified and directed by Engineer-in-charge.
M&L for preparation of new plastered surface of walls and applying two coats of cement base paint complete all as specified & directed by Engr-in-charge.
M&L for complete removal of existing treatment with mechanically means such as elctrical grinder etc. from wall and applying two coats of cement base paint complete all as specified & directed by Engr-in-charge. Note :(i) The area un approachable by machine shall be removed manually as per direction of Engineer-in-Charge
M&L for complete removal of existing treatment with mechanically means such as elctrical grinder etc. from wall and treating with two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified & directed by Engr-in-charge. Note :(i) The area un approachable by machine shall be removed manually as per direction of Engineer-in-Charge
Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe all as directed.
All as per item No 39 above but 20 mm dia pipe
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
All as per item No 41 above but 20 mm dia pipe
Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by engineer-in-Charge.
Demolition mud in roofs, any thickness, including plastering and leeping complete all as specified and directed.
M&L 40mm thick brick tiles laid flat on cement concrete & joints grouted flush in cement mortar (1:3) bedded over 15mm thick cement morter (1:6)mixed with 5% of crude oil by weight of cement on complete all as specified and directed by Engr-in-Charge.
All as per item No 45 above except tiles
M&L for Roof treatment to RCC roof as follows:- (a) Cleaning the roof surfaces thoroughly using wire brusehes to remove sharp projections, cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/plaster etc. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP membrane,(mineral finish) reinforced with non woven polyster fabric, by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by E-in-Charge.Make : STP Dr Fixit/Pidilite, Texsa India Ltd/Tikitar Dansona/Bengal Bitumen Notes : (i) All joints and change in directions should be covered wih cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/as per site reqmt and cured well before laying membrane by torching.(ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved from GE before carrying out the wk. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarnatee of treatment shall be for min 10 yrs reckoned from date of completion of whole wk.
M&L PCC 1:2:4 type B-1, using (20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work etc complete all as specified & directed
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed Note : Cleaning, repairing, etc. shall be measured and paid separately, if required
S&F in repair vitreous china wash hand basin coloured Flat back of size 550x400mm, including 32mm dia chromium plated waste coupling long screwed shank and fly nut, flanged end bedded in red led cement and other end fixed and PVC waste pipe including cutting for and pinning in ends of brackets in CM 1:3 all as specified .
S&F in repair angle valve/Stop cock/Stop valve fancy type, cast copper alloy, chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, size 15 mm bore complete, all as specified & directed by Engineer-in - charge Note : The minimum weight of tap shall be as given in SSR or in relevant IS
S & F in repairs pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with lettered hot/cold with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed.
E/M Portion Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.
Taking down sheet metal enclosure with MCB, MCCB etc main switch, any make & type, etc and making good disturbed surfaces to match with existing surfaces.
Taking down sub main wiring including conduit/casing capping of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces
M&L point wiring for one light/ceiling/exhaust fan point controlled by one switch with 1.5 Sqmm (nominal cross section area) PVC insulated unsheathed multistranded copper conduct cable in and including medium grade rigid PVC concealed conduit in wall after cutting chases in wall including cast iron or pressed steel terminal box covered with and including 3 mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and 1.5 Sqmm single core PVC insulated unsheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly and making good diturbed surfaces in cement motar 1:3 complete all as specified and directed.
,--ditto--- all as per Serial item No 56 above, but for One bell/buzzer point controlled by one bell push complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 56 above, but for One 3 pin 5 amps switch socket on same board with other switches complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 56 above, but for One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed by Engr-in-Charge.
,---ditto-- all as per item No.56 above but point wiring with 4 sqmm multi stranded conductor cable and 2.5 sqmm unsheathed copper conductor earth wire for two in one 5 pin 15 Amp socket outlet on indep board.
Supply and fix piano swith flush button single pole one way 5 Amps complete all as specified and directed
Supply and fix piano socket 2 in 1, 2/3 pin 5 amp flush type 240 volts AC complet all as specified and as directed
Supply and fix socket 2 in 1, 3 pin 5 amp and 15 amp flush type 240 volts AC complet all as specified and as directed
Supply and fix piano switch 15 amp flush type 240 Volts AC complet all as specified and as directed
S & F LED light fitting 1 x 20 W, 230 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-charge
Supply and fix lamp holder insulated body with back plate for angle/batten fitting with LED of 09 watt complete all as specified and as directed. As per specification
Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.
Supply and fix fan regulator electronic solid state with steps suitable for 1200/1400mm sweep ceiling fan working on 230 volt AC complete all as specified and directed
Supply and fix vertical MCB DB TPN 415 volts 4 way with 200 Amps bus capacity double door incl fixing on wooden board or recessed on wall complete all as specified and as directed
Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door complete all as specified and directed
Supply and fix MCB SP 240 volt 5-32 amp 10KA complete all as specified and as directed.
Supply and fix MCB SP & N 240 volt 6-32 amp 10KA complete all as specified and as directed.
Supply and fix MCB SP 240 volt 40 amp 10KA complete all as specified and as directed.
Supply and fixing PVC Blanking Plates one way with internal lock complete all as specified and as directed.
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item. (iii) Water pipe shall be provided in slanting position
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
Engineers CXonstruction Company
PAREEK AND COMPANY
M/S Shree Ram Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .