REPAIRS TO JOINERY PLUMBING FLOORING AND OTHER ACCN OF 22 RAJ RIF ADMC AND PCTC OF BANASWADI AREA UNDER GE NORTH BANGALORE

Amount

Dismantling timber scantlings in fillet, rail, posts, rafter, purlins etc under 40 sq. cm in section, in any position as in framed work etc complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed

Taking down wooden / alumnium door shutter of any description area exc 1.00 sqm & not exc 2.00 sqm each and refixng in same opening etc complete all as specified and as directed Notes : Rate inclusive for Butt hinges, Handle, tower bolt, sliding door bolt or any other mtrl reqd to fixing the door shutter. nothing extra shall be admission on this account

M&L MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc incl dismantling of Asbestos cement (corrugated,semi corrugated, etc.) etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in ridges / valley to wall, fixed with self tapping screws incl dismantling of Ridges etc complete all as specified and as directed

S & F grid suspended false ceiling GI grid system of size 600 x 600mm with main runner, cross tee, and wall angle of sutiable sizes as per manufactures instruction. Ceiling suspended with 3 mm dia GI wire hanger fixed with steel dash fastener, butterfly clips, hold down clips etc (Main runner, cross tee and wall angle of MS galvanized with PPPCGS) including 4mm thick HPSC self textured design pre primered non asbestos fibre cement building board fixed to false ceiling complete including taking down old ceiling inculding grids of any description complete all as specified complete all as specified.

Dismantling of stone set paving laid and bedded dry (above plus thickness of stone slab exc 0.25 mtr but n.exc 0.300 mtr) incl removing off the premises etc complete all as specified and as directed

M&L for Hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surface etc all as specified and as directed

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed

M&L for 100mm thick Cement concrete type B-1, 1:2:4 (with using 20mm graded aggregate) finishing even and smooth without using extra cement as in flooring / hard standing incl necessary form work etc complete all a specified and as directed

M&L for plain cement concrete Type D-2 1:4:8 with using 40 mm grades stone aggregates as in foundations and mass concrete etc complete all as specified and directed

M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for PCC 1:2:4 type B-0 with using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and 3 mm thick APP modified water proofing membrane, weight not less than 3.60kg/Sqm reinforced with non woven polyster / HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm incl screed bed 10 mm thick in CM (1:3) over concrete surface mixed with and incl water proofing compound incl taking down existing roof treatment of any types incl HP clay tiles etc along with cement plastering etc complete all as specified and directed. Notes for Item No 20 & 21 Rate included for following activities :- (a) Work is being carried out in High rise Building, height exc 15.00 RM N.exc 20.00RM. (b) Necessary safety precautions/Insurance etc of workers to be taken care of by the contractor as per Govt Norms / Labour Acts. (c) Necessary T&P and other eqpt reqd to be provided by Contractor. (d) Nothing extra shall be admissible for any activities of Roof Treatment work

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finsihed even and smooth (without using extra cement) incl preparing of new plastered surface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound, where ever required etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Supply only liquid water proofing compound

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint over a coat of white cement primer etc complete all as specified and as directed

S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, locks strike plate etc complete all as specified and as directed

S&F 35mm thick flush door shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100mmc/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bar/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges, Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) 4 mm thick sheet glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately. (Note : All Windows/Vent design as per CECZ TD drg No 539)

M&L for cement concrete 1:3:6 type C-0 (using 12.50mm graded stone aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed

S & F for solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note - Glass and particle board shall be measured and paid separately under respective items.

S&F Aluminium Powder Coating (minimum thickness of powder coating 50 micron frame in aluminium partions having horizontal & vertical distance between two frames not exc 1.00 m & section of size 50 mm x 44.5mm of 16 guage of such type arrangement for fixing glass/pre-laminated board on both/one side complete with fixed in brick masonary/conc work by necessary drilling & rawl plug arrangement in (floor/glass/etc.) complete all as specified and directed Note - Glass / particle board shall be measured and paid separately under respective items.

S&F 8 to 9 mm prelaminated particle board, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work etc omplete all as specified and as directed

S&F in repairs aluminium door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with alumnium die cost body etc complete all as specified and as directed

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed

S&F 200mm long aluminium anodised tower bolt of extruded section etc complete all as specified and as directed

S&F 100 mm thick stainless steel butt hinges, heavy weight, and fixed etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed '

S & F 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed

S&F 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed

Repair to existing aluminium door incl taking down shutter of any size and description incl repair to pivot, handle, hinges,spring, minor adjustment if required and make it smooth and functional and operational etc omplete all as specified and as directed

S&F 40mm dia GI tubing Medium Grade incl all fittings and fixture fixed on walls/ ceiling or laying in floors incl taking down existing GI pipe line etc complete all as specified.

S&F 25mm dia GI tubing Medium Grade incl all fittings and fixture fixed on walls/ ceiling or laying in floors incl taking down existing GI pipe line etc complete all as specified.

S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 2000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repairs white vitreous china one piece wash basin of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

S&F in repairs EWC with normal closing seat cover of size 540X375X415mm with S Trap incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed. (Make Cat no 4018 of Prayag of equlavent make of Cera)

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor, etc complete all as specified and directed.

S&F in repairs Viterous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl 40 mm dia PVC waste pipe 610 mm long and PVC connection 450 mm long, flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected

S&F in repairs PVC deo flushing cistern valveless, low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag of equlavent make of Cera)

S&F in repair 15mm dia Pillar tap PTMT fancy type any long body colour screwed, for iron pipe etc complete all as specified and as directed

S&F in repair 15 mm bore dia Bib tap fancy type long body standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 120gms)

S&F in repair 15mm dia stop cock / angle / Concealed cock PTMT fancy type any colour screwed, for iron pipe and fixed etc complete all as specified and as directed

S&F in repairs chromium plated long body bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-08H Neptune series of Prayag or equivelant make in Jaguar / Hindiware)

S&F in repairs 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No PIS-14H Neptune series of Prayag or equivelant make in Jaguar / Hindiware)

S&F in repairs 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No PIS-10H Neptune series of Prayag or equivelant make in Jaguar / Hindiware)

S&F in repairs 100mm (4") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-73 Neptune series of Prayag or equivelant make in Jaguar / Hindiware)

S&F in repairs Soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag of equlavent make of Cera)

S&F in repairs Hand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed Prayag of equlavent make of Cera) 3N, MAKE - JAQUAR)

S&F in repairs SS Grab bar Towel rail 450 mm long incl fixing arrangement etc complete all as specified and as directed (Make Cat no GM-04 of Prayag of equlavent make of Cera)

M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

S&F 2nd class hard wood scantling clean sawn surfaces incl a coat of creosote oil painting etc complete for grid work of wall panelling fixed with nails in the wall etc complete all as specified and as directed

S&F 8mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutte, shelves over 4mm thick MFD board, medium density, fibre board, single layer type or three layer type with BWR type adhesive, fixed with screws over 0.90 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions etc complete all as specified and as directed incl taking down existing boarding etc complete all as specified and as directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard / dense soil etc complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed

M&L for Pre-cast reinforcement cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc incl demolition of existing RCC Slab of any description and in any position etc complete all as specified and directed. Note:- Reinforcement should be measured and paid separately.

M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint leaid in trenches or in floor /walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed

M&L for water proofing to Lift Wells / Shaft with following procedure :- (a) Surface Preparation:Through out grinding and cleaning of the surface to receive the coating surface must be free from oil, laitance, grease, wax, dirt or any other form of foreign particles. Cracks if any, to be addressed. PCC 1:2:4, Type B-0 (12.5 mm graded stone aggregates) as in coving /side Packing of on the wall & floor joints. (b) Supply and applying of Two component Poly Urethane (Colossus PU 2K 1601) Pressure grouting and to be done from the negative side of the podium slab. Aluminium nozzles to be fixed and sealed with quick setting plug. Grouting to be done using 540psi electric pump until saturation.(75-85 points minimum) Condt/---82

Condt/--81 (c) Application of LaGreens Brush Seal either by hand/brush or via electro mechanical spray machine. Apply of 1 coat of La Greens Fiber Flex Ultra all over and taking the coating upto lift PIT floor level and above 1ft on to the wall.After a gap of 12-24 hours, preparing and application of 2nd coat of LaGreens FiberFlex Ultra. (d). Protective Plastering ; Providing and applying 10mm thick in CM 1:3 mixed with water proofing compound @ 0.20 Litre per 50Kg etc complete all as specified and as directed. Make of Applicator ;La greens & Colossus or its techno commercial equivalent in STP. Notes : The Rate inclusive for any T&P, aluminium nozzles, Pumping out of water, excavation as required, RFR , Removal, Demolition of Cement concrete / RCC or any other accessories reqd during water proofing treatment to lift well.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 1.0 Km but not exc 1.50Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

J PUSHPALATHA ENGINEER AND CONTRACTOR

Janatha Trading Corporation