39/EEC/BSNL/CD/BGL/2022-2023

Amount

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

20 mm dia (heavy type)

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Single rubber stopper

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia. 0.50 mm all complete.

With 12 mm mild steel U beading.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :

Old work (one or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :

One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

French spirit polishing :

One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 453x357 mm

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

15 mm nominal bore.

Supplying and fixing C.I. cover without frame for manholes :

455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg.

Cleaning of water tank on terrace approximate capacity of 1500 litres manually using bleaching powder including necessary rubbing and cleaning of internal surfaces with clean water to make the tank odour free.

Cleaning of entire internal portion of quarters with very mild acid/approved soap solution and mopping of floors, cleaning of dados and flooring including kitchen tiles above cooking platform , attached bath room, common both room and WC including cleaning wash basin, water closet etc.(Cost included removal of all the accumulated waste materials,cobwebs ,dirt and dust) complete as per the direction of Engineer-in-charge.

Ftype SQ

Credit to Contractor dismantled, damaged / defective FRpsheet

providing and fixing 1mm thick fibre sheet approved manufacture including fixing it in position with necessary screws/nuts and bolts all complete as directed by Engineer in charge.

Dismantling FRP sheet from door frames (of area up to 5sqm) including removing the j bolt and stacking of serviceable material and disposal of unserviceable material with in 50m lead

Pruning, trimming, of tree branches (ht 15 feet and above) and girth up to 50cm including removal of cut materials upto 50mt. lead and as per direction of officer in charge (necessary T&P shall be arranged bythe contractor).

Providing and fixing 15 mm Heath faucet of C.P brass head and P.V.C connection pipeof approved make etc. complete as per the directions of Engineer-in-Charge. Cost includes removal of non-funtional/worn-out health faucet.

Providing and fixing two in one tap including fittings of approved make etc. complete as per the directions of Engineer-in-Charge.Cost includes removal of non-funtional/worn-out 2 -in- 1 tap.

Providing and fixing Brass spindle of approved quality to pillar cock / stop cock /bib cock/ concealed stop cock of 15mm or 20 mm nominal bore by replacing the damaged spindle complete as per the direction of the Engineer in charge. Brass spindle of approved quality for concealed stop cock of 15mm or 20 mm nominal bore

Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with two CP Brackets a) 600X20mm complete as per irection of Engineer in charge

"Providing and fixing 600x100x4 mm acrylic shelf with edges round off,with guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete"

Providing and fixing 15mm C.P Brass pillar taps of approved quality conforming to IS. Standard and weight not less than 650 grm .

(a)15mm nominal bore

Arresting leakage in Roof by applying Fosroc brush bond Roof guard or equivanet three coats over the plastered surface cost includes preparation of surface by cleaning the plastered sufrace free from dirt and oil and mixing and applying 3coats over the sufrace etc complete as per directions of the Engineer-in-charge.

Uprooting the vegetation growth in the terrace slabby dismantling the cracks, raking out the joints,removing the roots and dipoal of the same etc complete as directd by the Engineer in charge.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. With available beading

Shifting of cupboard of size up to (2.5x1.5m)from Living hall to Master bed romm icluding removing and refixing etc complete as directed by the Engineer in charge.

Finishing walls with Acrylic Smooth exterior paint with silicon addiives (apex tile guard Asian or equivalent) of required shade : Old work (One or more coat .

Providing and fixing C.P.Brass wall mixture with crutch and (heavy range ) 15mm dia of approved make with extension piece etc complete as directed by the Engineer in charge.

Easening of doors of any size and any thickness ( Wooden doors shutters as the case may) by removing the door shutter , making necessary repairs like plaining the edges for wooden doors as required so as to ensure smooth functional operation of the door, including greasing of hinges all complete as directed by Engineer-in-Charge. Note : The cost of new hinges if provided to be paid separtely.

P/F box type Cabinet mirror of size 35 x 50 cm and of required depth, of approved colour and make including fixing it in position with necessary screws etc as directed by Engineer-in-Charge

Providing and fixing granitestone for door sill, size 40 mm to 75mm width, thickness 25mm to 40mm and fixed in position with metal paste or suitable adhesive etc. complete as per the directions of Engineer-in-Charge.

shifting of cupboard of size up to 3.5x3m from FF Bed room to to Mbed room etc complete as directed by the Engineer in charge.