Strengthening of communication backbone by replacement of defective Telecom cables & Datacom assets in Nagpur division of Central Railway.

SUPPLY OF LIU OFC TERMINATION UNIT (Rack mountable 24 port) along with supply of all accessories suitable for Mono/Multi (as per site requirement) mode fiber like LC adaptor plates, LC connectors, LC pig tails and blank plates etc.

Maintenance Free Earth as per RDSO/SPN/197/2008 or latest consisting of : 1) Copper 02 bond steel electrode 3 Mtr long 17mm dia with copper bonding thickness of min. 250micron & UL listed & marked-01 No. (2) Earth enhancement compound RDSO Approved in sealed bag of 10 kgs - 03 No. (3) Copper strip 150 x 25 x 6mm - 02 No (4) Copper Strip 300 x 25 x 6mm- 01 No (5) 35 Sqmm Copper Cable to connect earth electrode to MEEB - 15Mtr Approx.

Operating tool (operating tool, screw driver & stripper) as per Annexure-VII.

Supply of Thermo-Shrink cable joining kit (Reinforced) TSF-2 type generally 04 confirming to RDSO specification RDSO/SPN/TC/57/2015 Rev 1 with modified kit contents as per CSTE's Specification No.:CR/SPN/TC/57 (A)/2015 Dt: 06.01.2015 (Table-A) to be suitable for jointing both 10/20/50 pair PIJF and 4/6 Quad cables alongwith sub-kit (Table-B) for armour continuity.

"Supply of 24 fibre straight Joint closure (SJC) complete with all accessories as per 05 RDSO Spec. No. RDSO/SPN/TC/68/2014 Revision 1.0 and as per or TEC Spec. G/OJC/02/02 Sept 2003 or latest of Raychem make model FOSC 400 B4 24F or TVS ICS make model 1500-L1 83-XX or Birla VXL make model VT-200 or 3M make model 2179 CD."

Electronic LC gate telephone system as per Specification RDSO/SPN/TC-51/2021 Revision -1.0 ( With Voice logging facility) a)Master Telephone

Electronic LC gate telephone system as per Specification RDSO/SPN/TC-51/2021 Revision -1.0 ( With Voice logging facility) b)Slave Telephone

B-SOR Execution

Installation of unit earth as per RDSO/SPN/197/ver I or latest, to construct earthing of </=1 Ohm consisting of a digging the earth to required depth, insertion of electrode, filling of earth 01 enhancing compound & construction of chamber, measurement of earth value and all other work of earthing as per code of practice. All the consumables for mounting the copper tape inside the relay room, Exothermic weld materials and tools & fixtures for the welding copper tapes nd Electrodes etc shall be arranged by the contractor.

Excavation of cable trench as per cable route plan, 1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid to trench by loose soil for a layer 02 of 50mm thickness after clearing of route, bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8 m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions, proportionate payment will be made as per procedure. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 805

Excavation of cable trench as per cable route plan, 1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid to trench by loose soil for a layer of 50mm 03 thickness afer clearing of route, bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8 m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions, proportionate payment will be made as per procedure. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 805

Cutting of all types of Roads/platforms (except concrete type) for trenching and 04 excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI/DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 807

Fixing of GI pipes for crossing the culverts, bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site.

Digging of trench 1.0 M deep from rail flange/road level (for LC) and, 0.3 Mtr to 0.6 06 Mtrs wide and back filling after placing of DWC/RCC/GI pipe. (Placing of DWC/RCC/GI pipe coverd separately). The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. Drg No SK 806

Laying of DWC/RCC pipes alongwith collars / RCC Half round pipes in trenches at places of track and road crossings, platform cutting etc.

Laying of signalling/Power/Telecom cable of various cores/sizes in trenches.

"Where ever depth of 0.5 m cable trench is not feasible, cable shall be protected as under:- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench."

Laying of GI pipes in on bridges/culverts/concrete drain/ mountain ridges etc. with 10 suitable GI bend shall be provided where there is turning of pipe as per instructions of the site engineer. GI Clamps at every 2 m as shown in the drawing to be fixed. Suitable holes to be made in the pipe before laying as per instructions of the site engineer. 100 mm dia. Drg No SK 808

REMOVAL OF PSC/Wooden SLEEPERS coming in the way of/route of cable trenching, signal/Location foundation/Track Crossing etc. These obstruction will be removed by contractor for ensuring proper execution of related works.

REMOVAL OF Redundant/Old Rails coming in the way of/route of cable trenching, 12 signal/Location foundation/Track Crossing etc. These obstruction will be removed by contractor for ensuring proper execution of related works.

Making of thermoshrink straight through/derivation/ transformer /PIJF cable joint for underground jelly filled cable 6 quad/4 quad/20 pair 10 pair etc. PIJF cable as per the instruction of Rly engineer at site.

Horizontal boring of cable duct of minimum 2.0 Mtr depth along with laying of 120mm HDPE pipe for track crossing with minimum depth reckoned from bottom of the rail/Road crossing with minimum depth reckoned from ground level. The work shall be done as per extant practice & 14 instructions of site engineer. Preparation of site for Horizontal Boring shall be carried out in presence o f Railway Representative. HDPE will be supplied by Railway. Note:- Contractor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.

Horizontal boring of cable duct of minimum 2.0 Mtr depth along with laying of 120mm HDPE pipe for Other location with minimum depth reckoned from the ground level. The work shall be done as per extant practice & instructions of site engineer. Preparation of site for Horizontal Boring 15 shall be carried out in presence of Railway Representative. HDPE will be supplied by Railway. Note:- Contractor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.a) BORING upto the length of 150mtrs. Preparation of site for Horizontal Boring shall be carried out in presence of Railway Representative.

Horizontal boring of cable duct of minimum 2.0 Mtr depth along with laying of 120mm HDPE pipe for Other location with minimum depth reckoned from the ground level. The work shall be done as per extant practice & instructions of site engineer. Preparation of site for Horizontal Boring 16 shall be carried out in presence of Railway Representative. HDPE will be supplied by Railway. Note:- Contractor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.b)BORING beyond of 150mtrs. Preparation of site for Horizontal Boring shall be carried out in presence of Railway Representative.

Laying of RCC half round cement pipe of approximate size (150/300 mm dia X 2 Meter length) inside the trench after laying of cable. Pipes shall be placed as per directives of engineer.

Transportation of signaling material/equipments including loading and unloading in 18 10MT vehicle, anywhere to anywhere, and stacking at destination as per instructions of SSE in- charge as per inventory. For carrying heavy materials like cable drums, DG set, Electrical lifting barrier pedstal, IPS, Batteries, Point machine etc.Unit(Per Ton/Per KM=1 set)

Laying of HDPE duct in trench and its protective work as per direction of site engineer.

Blowing/Drawing of OFC cable in HDPE/DWC duct and protective work, as per direction of site engineer.

Splicing (Jointing 2X24 F OFC) and testing of 24 fibre OF Cable and making the splice joint as per direction of site engineer with contractors own splicing machine & tools. Splice loss of each fibre should be less than or equal to 0.05db splice reflectance should be better than 60 db.

Supply of single mode 6 fibre armoured optical fibre as per ITU-TG 652D cable . Make Dlink/Molex/Amp/Finolex/sterlite or similar (Inspection by consignee)"

Supply of 06 core optical fiber cable Un-Armoured Single Mode. Make Dlink/Molex/Amp/Finolex/sterlite or similar (Inspection by consignee)

" HDPE duct 40/33mm As per RDSO/SPN/TC/45/2013 Rev. 2.0 with Amendment. For each KM of HDPE duct following items are to be supplied a)- End plug-2 No. b)- Cable sealing plug- 2 No. c)- Plastic couplers slip fit/push fit type-2No. d)- End plug to be provided along with drum-2 Nos (Inspection by Consignee) "

"Supply of UTP CAT-6 Cable 23 AWG as pr TIA/EIA - 568 C.2 Standards latest with PVC jacket and four twised pairs for indoor installation Make D-Link, DIGISOL, FINOLEX MOLEX or similar. (Inspection by consignee)"

"Supply of STP (Shielded twisted pair) CAT 6 cable conforming to TIA/EIA 568-B.2-1 .Make- D link, Digisol,Finolex,Molex or similar. (Inspection by consignee)"

Supply of PVC switch board 5 pair 0.5mm dia. annealed copper telephone cable, conductor solid annealed bare copper 0.5mm diameter as per Tec spec. No. GR-WIR 06/03 march 02 or latest. MAKE: NETWORK CABLES, Finolex, Delton, D link OR SIMILAR (Inspection by Consignee)

"Supply of PVC switch board 20 pair 0.5mm dia. annealed copper telephone cable ,conductor solid annealed bare copper 0.5mm diameter as per Tec spec. No. GR-WIR 06/03 march 02 or latest. Make: NETWORK CABLES, Finolex, Delton OR SIMILAR (Inspection by consignee)"

" Supply of multi strand PVC insulated flexible power copper cable, size: 3 coreX2.5 sqmm individually PVC insulated &overall PVC sheathed 1.1 KV Grade conforming to IS :694 and 8130. Make: HAVELLS /FINOLEX /POLYCAB /KEI or similar (Inspection by consignee)"

"Supply of cable PVC insulated size 3/0.71 mm twin core annealed copper conductor PVC insulated shielded PVC sheathed PA cable having specification ITD/S/WS/117B. (Inspection by consignee)"

Supply Installation &commissioning of 12 Port LIURack mountable withpigtails/patch cords. LIU shouldbe provided for terminating theoptic fiber cables. It shallprovide minimum 10 bendingradius and the splice trays shallfunction as a splice cover forpigtail splicing. Cable glandsshall be provided for securedanchoring of incoming cables.Rubber grommets shall beprovided at the cable entry pointfor tight sealing. The splice trayshall be made of ABS materials.LIU should be of reputed make.Make D link or similar(Inspection by consignee)

12 Port Wall Mounted Fibre Patch Panel (LIU) Brand: COMTECH or similar (Inspection by consignee)

Supply of OFC jointing kit for 6 fiber with splicing & termination of fiber (Inspection by consignee)"

Supply of Single Mode OFC Patch Cord. Length -3 Mtr. . Make - Syrotech or similar with connector type as per site condition. Detailed specifications as per Chapter III of tender document.(Inspection by consignee)

Splicing/Dropping/Termination of each fiber/pigtail in LIU/IO BOX/Terminal Joints 14 through fusion splicing for termination of OFC cables. The fibers terminated shall be tested and test report (hard & soft copy) shall be submitted to railways site incharge for records. each fiber shall be properly marked with necessary ferrules/tags.

"Supply of CAT-6 UTP Patch Cord of length 2 Mtr, 24 AWG. It Shall comply to TEC GR No. TEC/GR/SLC -01/02.AUG 05 (TEC Standard Number: TEC 52010:2005) with latest amendments, Version, Make:- D-link or Similar. (Inspection by Consignee)"

"CAT6 UTP Patch cord 0.5 Mtrs, 24 AWG Make: D link or similar (Inspection by Consignee) "

Supply of 24 port RJ 45 socket patch panel Make - Avaya lucent /AT&T/Comscope or similar mountable in 6 U rack 19'' rack. Detailed specifications as per Chapter III of tender document. (Inspection by Consignee)

" Supply of Layer-2 managed POE Switch (24 ports 10/100/1000 BASE-T ports, 4x 1G SFP+ ports) with SFP module .Detailed technical specification as per chapter III of tender document. Make - Cisco, HP, Juniper , Alcatel, D link, TP link or similar. (Inspection by consignee) "

"Supply of Layer-2 managed POE Switch (8 ports 10/100/1000 BASE-T ports, 2 SFP 1G uplink ports) with SFP module . Specifications as per Chapter 3 of tender document. Make - Cisco, HP, Juniper , Alcatel, D link, TP link or similar. (Inspection by consignee)"

"Supply of Layer-2 managed non POE Switch (8 ports 10/100/1000 BASE-T ports, 2 SFP 1G uplink ports) with SFP module as per specification mentioned in Chapter III of tender document. Make - D-link, HP, Cisco, Juniper, TP link or similar (Inspection by consignee)"

" Supply of Layer-2 managed non POE Switch (24 ports 10/100/1000 BASE-T ports, 4 SFP+ 10G uplink ports) with SFP module as per specification mentioned in Chapter III of tender document. Make - D-link, HP, Cisco, Juniper, TP link or similar (Inspection by consignee)"

"Supply of 8 port SFP layer 2 switch with all SFP ports . Model CBS350-8S-E-2G-xx or 22 similar, 8 giagabit SFP, 2 Gigabit copper/SFP combo ports, rack mountable 8 port SFP with 2 uplink 1G/SFP ports . This includes supply of SFP module. Make Cisco, HP, Juniper or similar. (Inspection By consignee)

Installation,testing & commissioning of L-2 POE switch 24 port & 8 port LAN manageable switch.

"Supply & Installation of Router with minimum 8 nos. Ethernet WAN port which shall be combination of 4 nos. of 100/1000 Base-T Ethernet Router WAN Ports and 4 nos. G.703 interface / 24 E1 WAN Ports .Detailed specifications as per chapter III of tender documet. Make Cisco, HP, Juniper or similar. OEM shall certify that the proposed make and model is not end of life and support for the offered product shall be available till completion of codal life. Sample to be approved by consignee before supplying. (Inspection by Consignee). "

"Supply of 30 Mbps 2W/4W High-Speed LAN Extenders supporting short and long 25 distance (upto 10 Km or more) with AC/DC Power Supply from a single socket plug in module in standalone unit. Accepted/Make:-MROTEK, NOMOUS , Team Engineer or better. (Inspection by Consignee)"

Supply of media converter with required accessories and including all necessary connecting cable Make HCL/Digisol/ Dlink/Mrotek/iball or similar. Specifications as per Chapter 3 of tender document. (Inspection by consignee)

"Supply of 19 inch 9 U rack having 600mm depth, front toughened glass door with secure lock, 02 Nos. of fan for heat dissipation with 01 No. rack tray & power distribution unit. Make HCL, APW, Rittal, President or similar. (Inspection by consignee)"

"Supply of 19 inch, 6U Rack wall mountable rack rack shall consist of 600mm depth, front toughened glass door with secure lock, 02 Nos. of fan for heat dissipation with 01 No. rack tray & power distribution unit. Make HCL,APW, Rittal, President or similar(Inspection by consignee)"

1G SFP Small form-factor pluggable transceiver compatible with the switches taken in the schedule. These SFP are to be supplied in addition to the SFPs already included in the supply of switches. Brand: D link, ANDA TELECOM, Syrotech or similar (Inspection by consignee)

Supply & Installation of Online UPS of Rating 2x10.0 KVA With Battery Of Backup 30 Time 120 Minutes (2 UPS with common battery bank) with all accesories required for their installation. Supply shall include Battery set. Specifications as per Chapter 3 of tender document. Make - APC, Microtek, Luminous,Liebert, Numeric or similar. (Inspection by Consignee)

"Supply & installation of online 5 KVA UPS, 02 module (N+1) with common battery 31 bank having backup of minimum1 hr . This included supply of battery set. Make APC, Microtek ,Luminous, Liebert, Artis or similar. Specifications as per Chapter 3 of tender document (Inspection by consignee)"" "

Line Interactive UPS with AVR of Rating 1.0 KVA Brand: BPE,APC, Microtek, Luminous,Liebert, Numeric or similar (Inspection by Consignee)

Supply of GI pipe with thread collar of 40mm nominal bore, specification no. IS-1239 medium grade of TATA/JINDAL/ZENITH BIRLA make or similar (Inspection by Consignee)

Laying of OFC/STP/Power/data/ Telecom/PA cables in trenches & casing along with fixing of casing capping.

Cutting of platform surface/Tile/slab for a depth of 15cm and a width of 10cm and 35 refilling/reconditioning /concreting/repairing the platform after laying HDPE pipe and cable. Cutting should be done with marble cutting machine in proper manner and restore the same as before in such a manner that aesthetic of the platform is not disturbed.

Supply of PVC casing & Capping size 50mm x 50mm x 1mm thickness of Make Precision/Presto plat/Presto teak or similar. . (Inspection by Consignee)

Supply of PVC Rigid/Conduict pipes and its fixing accessories 25mm x 1mm thickness o f Precision/PLASTO/Presto teak make or similar. Sample to be approved before supplying. (Inspection by Consignee)

Supply and fixing of Concrete Cable Route Marker. Drawings as per telecom manual Drawing no. RDSO/TCDO/COP-22(a). (Inspection by Consignee)

Supply of UTP I/O box single port surface mounting having one RJ-45 port from D-link or Legrant or Amp make or similar. (Inspection by Consignee)

"Supply of Modular box with plate 4 way consists 2 RJ-45 plate & 2 Telephone socket. It shall be Flame-retardant, high-impact ABS plastic or UV-stabilised Polycarbonate to prevent yellowing over time.(Inspection by consignee)"

Light weight portable control phone 4W/2W for field staff as per IRS TC 78-2000 with latest ammendments. (Inspection by Consignee)

"Supply of GSM/4G VOLTE FCT for Voice applications built in ports 1 GSM /4G port & 1 FXS port Model SIMADO GFX11 4G (W/O BB ) Matrix or Techroute or Beetel or Motorola or similar Make.(Inspection by consignee)"

"8 port FXS Gateway along with accesories for Pabx System. Shall be of open source/standard. Make: Matrix, Coral, Grandstream or similar. Specifications as per Chapter III of tender document (Inspection by Consignee) "

" Supply of 100 pair Krone Terminal Box complete with mounting arrangement.Made 44 of MS sheet of thickness 0.8mm.Cable entry hole with washers.Color powdered coated.Back mount frame plate.10No.s of Krone modules.Each krone module with 10 ports. Suitable to connect 0.6mm wire. Lock and Key system. Make:BSNL/ KRONE/IHT or similar (Inspection by consignee)"

Supply of Digital clock (office clock) with GPS synchronisation as per RDSO spec no. RDSO SPN TC 62 2008 Rev 3.0 or latest . Make Partronics/Epsilon/ Efftronics/ MIC/ Vardaan or similar. (Inspection by Consignee

Clamp type Digital earth tester. 4 digit LCD display Auto ranging Digital Earth 46 Resistance Meter. Method for resistance measurement 2-pole. Number of Test Leads with Clamps 2. Measurable Earth resistance accuracy 1.5 % 1 count, 3 % 1 count, 10 % 1 count. Test Reports from Central Govt / NABL approved / ILAC acredited lab to prove conformity to the specification required. Make: METRAVI CET-02 /FLUKE/KUSAM MECO or similar. (Inspection by Consignee)

Cross Talk Meter as per IRS/TC 45/88 or later amendments. Make/Model-ANU VIDHYUT TYPE 378-B or similar (Inspection by Consignee)

Digital Fault Locator, TDR based Cable Fault Locator for metallic cables viz LV power 48 cables/control cables fault location capability 15 KM, Accuracy +/- 01 M at 3000 Meters. One step setup, configurable for any cable type. Measures distance to fault in feet / meters. Two pair test capability. Automatic instrument control Mode, splash and drip proof, splits/Crosstalk mode. Intermittent fault location, on-line tutorials, large backlit display, input protection plus/ minus 200V, DC plus peak AC to a maximum of 440 Hz. Battery operated, including test loads (Min.2 pair) carrying case, batteries, user manual and Calibration Certificate. (Inspection by Consignee)

" Supply of Optical Power meter with Visual Fault Locater. Specifications as per Chapter III of tender document. Make brand- PDR or similar (Inspection by consignee)"

"Supply of Pipe and Cable locator / Route tracer. Make: Radio detection RD8200G, Stanley or similar make/model (Inspection by consignee)"

" Supply of Splicing Machine as per technical specifications in chapter III of tender document Make:- Fujikura or similar (Inspection by consignee)"

" 30 decibel Single Mode Optical Time Domain Reflectometer (OTDR). Specification as per chapter 3 of tender document. Make: fibershot or similar (Inspection by consignee)"

Supply of Transmission measuring set (TMS kit) complete with tone generator and Db meter as RDSO specification IRS: TC-43/87 or latest, make Anuvidhyut or equivalent (Inspection by Consignee)

Supply of Thermo shrink Jointing kit for jointing underground 0.9 mm dia 4/6 quad cable as per Specn.No. IRS:TC-77/2012 (Rev.3) with latest amendment. MAKE : WESTERN CABLEX or similar (Inspection by Consignee)

Cutting of wall for insertion of 1" dia PVC conduict pipe for concealed wiring, fixing 55 hardware for fixing the conduit along with its supply and then replaster it with cement and sand mixture and then painting with matching color as per existing color of the wall proper joints in pipes, bends / elbow's / junction box are to be provided as per site requirement. (Inspection: Consignee)

Supply of Executive open standard 16 keys SIP/IP phone with 20 physical DSS keys 56 (40 nos DSS in 2 pages) Make Grandstream or similar but compatible with existing open source asterisk based IP exchange system. Detailed specification attached in chapter 3 of tender doc(Inspection By consignee)

Supply of 110mm HDPE pipe for laying in Horizontal Borring. (Insp AgencyConsignee)

Transportation & Execution of 6 Quad/PIJF/OFC joints using thermo shrink jointing kit/OFC jointing kit. This also include excavation of cable joint pit of size 1.2 mtr x 1.2 mtr x 1.0 mtrin all types of soil for jointing of cables, back filling and ramming after jointing

"Execution of S&T work related to engineering block of CTR/TTR/TSR, attending cable 59 cut in emergencies, shifting of assets or other telecom work. In one block, five unskilled manpower have to be provided during block for S&T connection removing & refixing as per Railway site Enginner instruction."

"Supply of Paint and painting of Emergency Socket assembly by applying one coat RED Oxide as base colour and then painting the assembly as per Zebra painting in White and Black Colour. The width of each strip shall be 4"" (100 mm ) . The paint shall be either from 60 ASIAN/SHALIMAR/APCOLITE having ISI mark. And painting of Telephone symbol along with indicating arrow whcih indicates the direction of nearest Emergency Socket on Mile stone/OHE Post/ Km Post.The various paint to be used should be as stated above. Size of stencil showing the marking of telephone arrow shall be got approved from Engineer in charge prier to commencement of work. (Inspection by consignee) "

Supply & Installation of 8 port GPON OLT confirming to as per technical specification attached in chapter III of tender document, with minimum 03 years OEM warranty. Make: Tejas, Syrotech or Similar. (Inspection by Consignee)

Supply of C++ GPON SFP Module for GPON OLT as per technical specification attached in chapter III of tender documents with minimum 03 years OEM warranty. Make: Tejas, Syrotech or Similar. (Inspection by Consignee)

Supply of 2 port home Wi-Fi enabled ONT as per technical specification attached in chapter III of tender document with minimum 02 years OEM warranty. Make: Tejas, Syrotech or Similar Inspection by RITES. (Inspection by Consignee)

Supply of GPON Splitter 1:4. MakeOptilink or similar. (Inspection by Consignee)

Supply of GPON Splitter 1:8. MakeOptilink or similar. (Inspection by Consignee)

Supply of GPON Splitter 1:16.Make Optilink or similar. (Inspection by Consignee)

Soldering Iron 60 Watt. Make: MORBUS or similar (Inspection by Consignee)

Portable hand drill machine, 600W, 13 MM, 2600 rpm or better. Make -YURI or similar (Inspection by Consignee)

Electronic Push Button Magneto Telephone (Desk Type) As per Spec No-IRS: TC - 79/2000 Amd -4 or latest. Make Epsilon , Bentron or similar. (Inspection by Consignee)

"Supply of 24 port VDSL2 IPDSLAM system with Expandability; 2U, Temperature- 70 Hardened, 5-Slot Chasis, MSAN AC Power Module & Fan Module- (01 No.) with Management Card with 2GbE combo ports (2 SFP and 2 1000BASE-T), (SIP-01 No.) and 24 port VDSL Line Card, with built-in-Splitter - 01 No. with Telco 64 to open ended Cable- 02 Nos. Make- ZYXEL or similar (Inspection by Consignee)"

"Supply of ADSL Router 150/300 Mbps four port Ethernet wireless compatible to existing make IPDSLAM System. (Inspection by Consignee) "

Supply of 12V, 100AH SMF VRLA battery Acrylonitrile butadiene styrene (ABS) Stationary Value Regulated Lead Acid Batteries 12 Volt 100 Ah Brand: ENERTEX, exide, powersafe or similar (Inspection by Consignee)

Supply of materials and execution of works including replacement of overaged cables, casing capping along with fabrication, fixing of frames, panels, shelves etc. for datacom related assets (Inspection by Consignee)

Supply of Wifi-6 Accesspoint 2x2 MIMO Dual Band Wireless Acess Point. Make HPE- Aruba-505, Cisco, Netgear or Similar. (Inspection by Consignee)

"Gigabit Load Balancing Router 4 Port WAN. Make TP-Link, Microtek, Netgear or Similar" Sample to be approved by consignee before supplyng (Inspection by Consignee)

Installation of Wireless Access Point.

35 sq mm multistrand single core PVC insulated copper cable for connecting Earth bus barto Earth electrode. Insulation cover should be green colour. Make RETCO or similar (Inspection by Consignee)

48 VOLT DC TO 230 VOLT AC Inverter. sample to be approved by consignee before supplying. (Inspection by Consignee)

Supply of Remote Terminal Unit for monitoring the dark fibre comprising of 8 port optical switch and capable of monitoring8 fibers at a time respectively and covering a monitoring distance of minimum75 Km OFC each optical port .Equipment must be of40 dB or more dynamic 79 range with 8 port optical switch output. Powered from both DC48V and AC 230V,50Hz.RTU must be able to be fitted in existing19" Rack. It should able to generate wavelength of 1310nmor1550nm or 1625nmfor monitoring of fibres. Insertion loss must not be more than1.5 db and MTBF must be better than 6 million cycles. It shall also be operated in temperature range of 0degree C to 50 degree C. Specification as per Chapter III of tender documents.(Inspection by RITES). 1584845.2

Supply of FMS (Fiber Monitoring Software /Application software for monitoring optical fiber network) server application with Google Conduit a) Basic Fault Management Module for detecting the fault in the optical fibre under surveillance and provide the optical distance and corresponding surface distance of the fault identified. b)Map Integration Module displaying fibre route in GIS / Google map and display the visual indication of the faults on the map c) Network 80 Analysis Module for analysis of the optical fibres under surveillance and provide trend analysis d) Report Generation Module for customizable report generation e) Modem Interface for SMS based alarm escalation for escalation of alarms through SMS to registered users as defined by admin f)Fibre Database Designer Module h) As Built Drawing / GIS Integrator Module i)Configuration Module j)Fault restoration Updating Module for tracking of restoration and updating of the restored fibres k)Interface with customer NOC for Trouble Ticketing l)Integration with Field Mobile Application Module. m) Schematics Module n)Port to Port Connectivity module)Service Provisioning module p)Integration with NMS for Active Link correlation. Specification as per Chapter III of tender documents (Inspection by RITES)

Supply of Serverhardware - RAIDarchitecture +Database Server +Online UPS- 1x IntelXeon E5-4607 (2.2GHz / 6 Core /12MB /95W) processor / 8GBmemory orhigher/5SFF Drive orhigher Cage/ NoStandard HDD /HPSmart Array P420 /1GW FBWC ControllerRaid / 1200W 81 CSPlatinum Hot PowerSupply. Item should beequivalent or superiorto the abovespecification shouldsupport operatingsystems: MicrosoftWindows server2003/2008/2008/2012R2, or higher. - Support Ipv4 / Ipv6. -Database: MS SQLstandard edition with 5CAL - Antivirus shouldbe installed andregular updates/signature and supportshall be provided up towarranty period- (a)This item also includesupply of online UPS of2KVA with 12V, 100 AH(07 Nos.) battery.(Inspection by RITES)

Route survey works(Survey of Railway Fiber route by using GPS and Roado-meter, capturing Geo and Fibres dats at each 10meters, man holes splice points, LSCs and other terminating points) specifications as per chapter III of tender documents.

Installation &Commissioning of RTU

Installation andCommissioning of FMS Software

Installation andCommissioning ofServer

Training of Fiber Monitoring System and other subsystem at all telecom Depot of Nagpur Division . Specification as per chapter III of tender document.