NMCG Phase 1 Part 1 Lucknow

Amount

39MLD STP at Daulatganj - Survey, Investigation, Design, Supply, Construction, Installation, Testing and Commissioning of 39 MLD STP on appropriate and cost effective Technology including 39 MLD MPS, Interconnection of old MPS with new MPS, Preliminary treatment of waste water/raw sewage, Primary treatment of preliminary treated waste water/sewage, secondary treatment, tertiary treatment (if required to achieve treated effluent parameters as per tender documents), Sludge handling, sludge digestion, outfall sewer, online effluent monitoring system, treated water pumping if required, required buildings, earth filling, site development, demolition of existing 42 mld STP sludge drying bed, construction of 42 mld sludge dewatering units to achieve sludge consistency as per manual/codes & allied works in an odour free environment as per scope of bid document/pre bid replies at Daulatganj, Lucknow with one year of Defects Liability Period for civil works and 2 year DLP for E/M works that shall include but not limited to getting NOC from different departments, vetting of design drawing from IIT, third party testing of influent, treated effluent, treated sludge, demolishing of required existing structure & other related works.

1 MLD STP at Bairikala - Survey, Investigation, Design, Supply, Construction, Installation, Testing and Commissioning of 1 MLD STP on appropriate and cost effective technology , Preliminary treatment of waste water/raw sewage, Primary treatment of preliminary treated waste water/sewage, secondary treatment, tertiary treatment (if required to achieve treated effluent parameters as per tender documents), Sludge handling, sludge digestion, , outfall sewer,online effluent monitoring system, treated water pumping & allied works in an odour free environment as per scope of bid document/pre bid replies at Barikala, Lucknow with one year of Defects Liability Period for civil works and 2 year DLP for E/M works that shall include but not limited to getting NOC from different departments, vetting of design drawing from IIT, third party testing of influent, treated effluent, sludge, demolishing of required existing structure & other related works.

I &D Work (Civil) for Bairikala Approach Channel Excavation in ordinary soil including disposal of surplus earth lift upto 1.5 mtr. & lead upto 50m, filling watering & ramming of excavated earth, into the trenches and disposal of surplus earth upto a distance of 50m from the centre of the foundation trenches.

Provide and fix close timbering in trenches below G.L. consisting of 40mm thick approved country wood plank for polling boards 125mm x 75 mm Indian eucalyptus Wood Walers and 100 mm dia eucalyputs wood ballies for strut at 1.50 m c/c for the proper complete in all respect ( Below Ground level)

Provide and lay Ist class brick ballast 40mm gauge with local sand and cement in proportion of 12:6:1 in foundation including supply of material labour and T&P required with compaction for proper completion of work (4.50 - 6.00 m below GL)

Cement concrete with 20 mm gauge stone ballast, local sand and cement in proportion 8:4:1 in foundation including supply of all materials, labour, T&P etc. required for proper completion of work ( 4.50- 6.00 m below GL)

R.C.C. work with cement, coarse sand and 20 mm gauge stone ballast in proportion of M30 in wall excluding supply of reinforcement and its bending but including its fixing & binding labour, materials and T&P etc. required for proper completion of work ( Above gound level )

( Below gound level ) , ( 0-1.5 mtrs)

( Below gound level ) , ( 1.5-3.0 mtrs) ( M- 30)

( Below gound level ) , ( 3.0-4.50 mtrs) (M-30)

RCC partition wall

Same as above but in foundation ( 3.00 - 4.50 m BGL (M30))

Steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel labour T&P for proper completion of work

Supply and fixing of 1.50 m wide and 1.20 m high MS screen made of 10 mm thick 40mm wide flat iron with angle frame 55X55X10mm including T&P labour material for grouting and proper completion of work

Provision for coffer dam and required pumping to divert nala flow during construction of Nala flow during construction Nala cross wall (weir) including supply of all materials, labour, T&P etc. and its maintenance complete.

Baling out of water from the excavated trench with help of pumps as well as manually as and when required including supply of pumps, diesel, mobil oil, waes of operators etc. complete for proper completion of works.

Disposal of surplus earth at proper place by truck upto a distance of 8 Km. including loading, unloading etc., complete in all respect

Barricading of trench area during excavation by balli posts and horizontal members fixed together properly,complete in all respect.

Fabricate, supply and fix steel ladder made of angle bars or of equivalent section as approved by engineers 65 X 65 X 6 and 25 mm round bars including supply of material labour and T&P etc for proper completion of work

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Remodelling of naala and Provision for construction of broad crested cement concrete weir in main naala for diversion of flow including supply of all material, T&P etc. for proper completion of work.

Bypass Arrangement with fixing of actuator based mechanized SS/CRS gates and discharge mesurement in bypass arrangement

Grit Chamber cum Collection Chamber Excavation in ordinary soil including disposal of sruplus earth lift upto 1.5 mtr. & lead upto 50m, filling watering & ramming of excavated earth, into the trenches and disposal of surplus earth upto a distance of 50m from the centre of the foundation trenches.

3.00 -4.50 mtrs subsoil

4.50 - 6.00 mtrs subsoil

6.00 - 7.50 mtrs subsoil

Provide and fix close timbering in trenches below G.L. consisting of 40mm thick approved country wood plank for polling boards 125mm x 75 mm Indian eucalyptus Wood Walers and 100 mm dia eucalyputs wood ballies for strut at 1.50 m c/c for the proper complete in all respect ( Below Ground level)

3.00 - 6.00 mtrs subsoil

Provide and lay Ist class brick ballast 40mm gauge with local sand and cement in proportion of 12:6:1 in foundation including supply of material labour and T&P required with compaction for proper completion of work (4.50 - 6.00 m below GL) in sub soil

Cement concrete with 20 mm gauge stone ballast, local sand and cement in proportion 8:4:1 in foundation including supply of all materials, labour, T&P etc. required for proper completion of work ( 4.50- 6.00 m below GL) in sub soil

R.C.C. work with cement, coarse sand and 20 mm gauge stone ballast in proportion of M30 in wall excluding supply of reinforcement and its bending but including its fixing & binding labour, materials and T&P etc. required for proper completion of work ( Above gound level )

Below ground level ( 0.00 - 1.50 Mtrs)

3.00 - 4.50 mtrs ( But in M-30 )

4.50 - 6.00 mtrs ( But in M-30)

Same as above but in Raft

6.00 - 7.50 mtrs ( But in M-30 )

Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel labour T&P for proper completion of work

Disposal of surplus earth at proper place by truck upto a distance of 8 Km. including loading, unloading etc., complete in all respect

Barricading of trench area during excavation by balli posts and horizontal members fixed together properly,complete in all respect.

Fabricate, supply and fix steel ladder made of angle bars or of equivalent section as approved by engineers 65 X 65 X 6 and 25 mm round bars including supply of material labour and T&P etc for proper completion of work

Supply and fixing of MS Jali to cover the twin grit chamber etc. (55x55x10 angles and 20x10 flats @53.10 kg/sqm)

Supply and fixing of 10mm thick MS sheet proportional flow weir.

Perforated RCC (M20) platform size of 2 m wide and 0.15 m thick.

Inspection plateform of PCC (1:2:4) over base conc. (1:4:8) along the girt chamber.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Barricading of both side of trenches with the help of Balli, Bamboo etc. in three rows upto 1m high post should be fixed at 3m etc. including all labour, materials etc. complete as per direction of Enginner in charge measurement of barricating will be only one side.

Excavation in foundation in kankar mixed soil including lift as specified and lead upto 50 m filling water and ramming of excavated into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal surplus earth upto a distance of 50m from the centre of foundation for sump well and SV chamber.( 10.50 - 12 mtrs below GL )

Supply, fabrication and fixing of well kerb cutting edge which includes angle section and MS plate including supply of labour material and T&P required for proper completion of work ( 9.00- 10.5 mtrs below GL)

Sinking of sump well wall of 15.00 m dia in all type of soil below ground level including supply and errection of all working T&P and equipment as well as loading and unloading of weight also including excavation of earth & bailing out of water when and where required with all T&P for proper sinking and including bituminastic painting of internal surface of sump wall . (in case of variation from dia of sump, rates for other dia sump shall be decided by square of adopted dia)

Provide & lay.stone boulders due to foul condition for making firm bed including dewatering and supply of material labour T&P etc required for proper completion of work ( 10.50 - 12.00 m (below GL))

Cement concrete with 20mm gauge approved stone ballast, Coarse sand and cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required for proper completion of work below GL including dewatering.( for sump well - 9.00 - 10.50 mtrs )

RCC work with cement, coarse sand and 20mm gauge stone ballast in proportion of M20 (excluding cost of reinforcement and its bending) but including its fixing and binding with 0.50mm thick binding wire (to be supplied by the contractor) and necessary shuttering, supply of all materials, labour T&P etc. required for proper completion of work. RCC foundation For Sump Well in M30 ( 9.00 - 10.50 m)

RCC work with cement, coarse sand and 20mm gauge stone ballast in proportion of M20 (excluding cost of reinforcement and its bending) but including its fixing and binding with 0.50mm thick binding wire (to be supplied by the contractor) and necessary shuttering, supply of all materials, labour T&P etc. required for proper completion of work.RCC WALL For Sump Well ( Above GL (0.00 - 1.50 m))

Above GL (1.50 - 3.00 m)

Well curb

For Sump Well Beam (2 nos.) ( Below GL (0.00 - 1.50 m))

Above GL (1.50 - 3.00 m)

RCC Plateform ( Below GL (0.00 - 1.50 m)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Fabricate, supply and fix MS ladder made of MS angle 65x65x5 and 25 mm round bars

PUMP House Ist class Brick work in 1:4 cement & coarse sand mortar including supply of material labour T&P etc required for proper completion of work

RCC work with cement, coarse sand and 20mm gauge stone ballast in proportion of M20 (excluding cost of reinforcement and its bending) but including its fixing and binding with 0.50mm thick binding wire (to be supplied by the contractor) and necessary shuttering, supply of all materials, labour T&P etc. required for proper completion of work.

Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.

12mm thick Plaster in 1:4 (cement and coarse sand)

Ornamental plaster on out side of PH @ 10% extra rates

Flooring

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)

40 mm thick pcc flooring with cement , coarse sand and 20 mm gauge stone ballast in proportion of (1:1.5:3)

Cement plaster skirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand)

Providing and supplying door, window and ventilator of aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge.

one priming coat & 2 coat oil distemeper inside of PH .Painting (two or more coats) on including a priming coat of ready mixed zinc chromate yellow primer on new work

one weather prime coat and two coat of oil distemper on outside of PH including supply of all material,labour,T&P etc required for proper completion of work

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including supply of all material,labour,T&P etc required for proper completion of work

Fixing of AC Down Pipe 100mm wih sufficient no. of clamp including supply of all material,labour,T&P etc required for proper completion of work

Provision of lightening conductor

Providing ganntry girder beam with movable trolly for lifting arrangement in PH (ISMB : 450) inclulding supply of all material, labour T&P etc

Providing and fixing of M.S. Gratings

Provision for soil testing of pumping station as per IS 2720

Dewatering of the area

Staff Quarter, Generator Room, tin shade for sweepers, Approach Road (interlocking tile rubber moulded 80 mm thick 50 sq m & CC road 100 sqm) & Site Development including Special T&P, single seat toilet, submersible pump based water supply with 1.00 KL overhead tank, Solar high mast light and Hiring of Godown

Approach Sewer to connect the collection chamber with sump (ISI marked 1100 mm dia RCC NP3 S&S pipe) incluuding supply. Carting jointing, bedding as per design, refilling of trenches, barricading, open and close timbering and shifting of utilities etc required for proper completion of works as per direction of Engineer incharge

Rising Main Earth work in excavation in pipe line trenches in ordinary soil left upto 1.5m and lead upto 50m filling /watering and ramming of excavated earth in to the trenches and disposal of surplus earth etc. for completion of work. ( 0-1.5 mtrs)

1.5 mtrs - 3.00 mtrs

Supply of 200mm dia DI Class K9 pipe including specials etc as per IS 8329

Carting laying and jointing of 200mm dia DI pipe in excavated trenches as per IS 12288

Air valve chamber earthwork in excavation work of 1.75 m deep providing PCC of 1:4:8 in foundation with 20 mm size blalast stone ,12 mmthick plaster of 1:4 cement motar and RCC work in slab of 1:1.5:3(cement :sand:aggregate)

Supply & fixing in position Air valves over pipe line

Scour Valves Chambers earthwork in excavation work of 1.75 m deep providing PCC of 1:4:8 in foundation with 20 mm size blalast stone ,12 mmthick plaster of 1:4 cement motar and RCC work in slab of 1:1.5:3(cement :sand:aggregate)

Supply and fixing in position scour valves over pipe line

Gate valve chambers earthwork in excavation work of 1.75 m deep providing PCC of 1:4:8 in foundation with 20 mm size blalast stone ,12 mmthick plaster of 1:4 cement motar and RCC work in slab of 1:1.5:3(cement :sand:aggregate)

Supply and fixing in position Gate/Sluice valves over pipe line

Barricading all around the trenches for safety to avoid any type of accident.

Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.

I & D Work (E&M) for Bairikala SITC of Pumping Plant of approved make confirming to IS no 5600- Non clog, single stage, bottom suction submersible sewage pump suitable for handling raw sewage of specific gravity 1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3 phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having following specification- Capacity - 20 LPS RPM - 1500 MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

Accessories of each submersible pumping plant (a) Pedestal with autocoupling (SS) (b) S.S. guide pipe approx (c) S.S. chain with shackles approx (d) C.I.D.F, bend 100 mm dia x 900

SITC of Starter confirming of IS/IEC 60947 SOFT starter of approved make for suitable operation on 415 ± 6 % volt, 3 Phase, 50Hz, AC supply suitable for starting and running of electric motor and 8 to 12 starts and stops per Hr.

Main pipes , valves and specials Moter operated C.I.D.F. rising spindle type, sluice valve with actuators conforming to IS : 14846 suitable for sewage application 150 mm dia size

C.I.D.F. Reflex valve conforming to IS: 5312 suitable for sewage applicable 150 mm dia size

SITC of Actuator operated sluice valve of 200 mm dia

C.I.D.F. dismantling joint 150 mm dia size

C.I.D.F. dismantling joint 200 mm dia size

C.I. pipes and specials - C.I.D.F. Enlarge 100 mm x 150 mm dia C.I.D.F. pipe 100/150 mm dia C.I.D.F. pipe 200 mm dia C.I.D.F.90 bend 100/150 mm dia C.I.A.F. pipe Tee 200 mm x 200 mm x 100/150 mm dia C.I. blind flange 200 mm dia

Necessary MS, Nut-Bolt and washer for complete and proper installation of piping and pumps as per direction of engineer incharge

Necessary SS Nut-Bolt and washer for complete and proper installation of piping arrangement and pumps as per direction of engineer incharge

Necessary rubber packing of suitable size 150 mm and 200 mm for complete installation of piping arrangement and pumps as per direction of engineer incharge

Mono rail traveling trolley with actuator operated chain pulley block confirming to IS 3938 Actuator operated Mono rail traveling trolley with chain pulley block of 1.5 Ton capacity having 6 mtr. lift complete with hand chain for installation of pumping plants

Sewage level regulator/controller Ultrasonic level regulator/ controller for measuring sewage level in the sump suitable for indication of low and high level in mtrs.

Pressure TRANSMITTER to be installed with pumps pressure gauge complete with necessary Cu. tubing, stop cock and necessary fittings suitable for sewage applicable

Power and control cable confirming to IS 694 The 95 sqmm 3.5 core size of cables or as per actual design calculation approved by engineer required for power wiring from sub station to L.T. panel of pump house

The 10 sqmm 3.5 core size of cables or as per actual design calculation approbed by engineer required for power wiring from L.T. panel of pump house to starters

Earthing confirming to IS 3043 Double earthing of all electrical equipments as per latest IER/PWD specification complete with salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes and G.I. earth strips of adequate size.

Construction of foundation for pumping plants, starters and panels. As per direction of engineer incharge

Installation of pumping plants and all related equipments at site as per direction of engineer incharge

Commissioning of all pumping plants and related equipments at site.

Painting of all equipments

Internal and external electrification of pump house, sub-station room and campus.

Spares Supply of spare pump set of similar duty of pumping plant

Tools & Plants: Supply of Tools (i) HT Megger- 1 no. (ii) LT Megger- 1 no. (iii) Hydraulic crimping tool- 1 no. (iv) Manual crimping tool- 1 no. (v) Clamp multimeter- 1 no. (vi) Chain wrench (vii) Pipe wrench (viii) Screw wrench (ix) Ring spanners (x) Double ended spanners (xi) Insulated pliers (xii) Hammer with handle (xiii) Hexa blade frame (xiv) Measuring tape of different size (xv) Sprit level set (xvi) Filler gauge (xvii) Chisel (150, 200mm) (xviii) File (Flat, half round, round and triangular) (xix)Power Drill (xx) Other Tools as specified

(i) Providing, Installation, Testing and commissioning of 200 mm ELECTRO MAGNETIC FLOW METER cum totalizer having following charecteristics/MOC: Liner: Polyurethane or Hard Rubber / Electrode MOC: SS316L /Housing : Die Cast Aluminium or CS / Power Supply: 90-230 V AC / Output: 4-20mA with HART / Sensor Cable : 10 mt / Flow Tube or Sensor housing protection IP68 / Process Flange : SS316 / Display : 3 1/2 LCD Display / Cable Connection : 1/2"NPT /Accuracy : 0.5%

CVT with control cables above flow meter

Mini tubewell for campus water requirement complete in all respect

Pole mounted Solor LED 1*18W Street lighting Fixture Installation

Provision of rubber matting /resistance sheet confirming to IS 15652

Provision of saftey equipment as direction of engineer incharge

Dredging pump 15 HP with 15 Meter hose pipe ,panel/starter ,cable complete

Exhaust fans of suitable capacity

Manual bar Screen Provision of CR steel manual coarse bar screen having clear gap between screen bar- 20 mm, size of flat shall be as per actual site condition angle of installation 45-50 degree etc . Complete

Mechanical Bar Screen should confirm to IS 6280 Provision of Stainless Steel (SS 316) mechanical bar screen having clear gap between screen bar- 20 mm, size of SS flat 50X10 mm shall be as per actual site requirement angle of installation - 70º duly followed with dismantling of existing manual screen and installation of mechanical screen including all necesary civil work required for proper completion of work , conveyer system, electric motor, starter, cable, panel, bins etc.

Sluice Gate

Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading, unloading, fitting in position including Sluice gates are upward opening wall thimble mounted suitable for isolating the flow of sewer into out of the opening in the wall. It consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The gates will be provided with pads on sides, top and bottom to mount the wedges. The gate shall be designed in such a manner, so that it can be operated at 2 meter head. Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested for tensile strength, Tested for over all dimensions as per approved GA drawing complete in all respect as per specification and direction of Engineer, For by pass

Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading, unloading, fitting in position including Sluice gates are upward opening wall thimble mounted suitable for isolating the flow of sewer into out of the opening in the wall. It consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The gates will be provided with pads on sides, top and bottom to mount the wedges. The gate shall be designed in such a manner, so that it can be operated at 2 meter head. Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested for tensile strength, Tested for over all dimensions as per approved GA drawing complete in all respect as per specification and direction of Engineer, For screen channels

Installation & Commissioning Installation & commissioning of all screens and sluice gates complete. As per direction of engineer in charge

Supply of silent type DG set , engine ,alternator as per ISO 8528 capable of developing 25 KVA at 415+6% ,50Hz AC at.85 P.F. lagging and self exciting coupled with suitable BHPdiesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel 12 volt lead acide Battery with lead silencer manual control panel & AVM pads D.G. set shall be mounted in open sky resting on the foundation as per the design.noise level and pollution level of D.G. set should comply with latest CPCB norms

Anti-Vibration mountings

Exhaust pipe, fuel line and fuel tank should comply with latest cpcb , spcb norms

Spare parts for D.G. set as per engineer in charge direction

Complete power wiring and earthing of D.G. set and AMF panel as per IER/PWD specification with necessary power and control cable, salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes and G.I. earth strip of adequate size

Construction of foundation of D.G. set and AMF panel as direction of engineer incharge

Installation of D.G. set and other accessories including commissioning and testing.

LOCAL CONTROL STATION

GSM/GPRS BASED REMOTE TERMINAL UNITS WITH Analog and Digital Parameter and features as specified to store and transmit data on GSM backbone to MCS and should able to send & received SMS from registered mobile parallel mode

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to MCS with all accessories and should able to send & received SMS from registered mobile parallel mode

Intelligent energy meters as per IS 16444

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IEC: 60947-1& IEC:60947-6-1) of rating 630 Amp

Complete cabling for all pumps as per direction of engineer incharge

Security Survelliance IP Camera

Installation, commissioning & testing

STRENGTHENING OF EXISTING Nagariya Nala Pumping Plant confirming to IS 5600 of approved make Non clog, single stage, bottom suction submersible sewage pump suitable for handling raw sewage of specific gravity 1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3 phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having following specification- Capacity - 125 LPS RPM - 1000 MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

Accessories of each submersible pumping plant (a) Pedestal with autocoupling (SS) (b) S.S. guide pipe approx (c) S.S. chain with shackles approx (d) C.I.D.F, bend 250 mm dia x 900

Starter of approve make confirming to IS /IEC 60947 SOFT starter suitable for operation on 415 ± 6 % volt, 3 Phase, 50Hz, AC supply suitable for starting and running of electric motor and 8 to 12 starts and stops per Hr.

Pumping Plant of approve make confirming to IS 5600 Non clog, single stage, bottom suction submersible sewage pump suitable for handling raw sewage of specific gravity 1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3 phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having following specification- Capacity - 70 LPS RPM - 1500 MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

Accessories of each submersible pumping plant (a) Pedestal with autocoupling (SS) (b) S.S. guide pipe approx (c) S.S. chain with shackles approx (d) C.I.D.F, bend 200 mm dia x 900

Starter of approve make confirming to IS /IEC 60947 SOFT starter suitable for operation on 415 ± 6 % volt, 3 Phase, 50Hz, AC supply suitable for starting and running of electric motor and 8 to 12 starts and stops per Hr.

Main pipes , valves and specials

(A) Moter operated C.I.D.F. rising spindle type, sluice valve with actuators conforming to IS : 14846 suitable for sewage application 300 mm dia size

(A) Moter operated C.I.D.F. rising spindle type, sluice valve with actuators conforming to IS : 14846 suitable for sewage application 200 mm dia size

(C) C.I.D.F. Reflex valve conforming to IS: 5312 suitable for sewage applicable 300 mm dia size

(C) C.I.D.F. Reflex valve conforming to IS: 5312 suitable for sewage applicable 200 mm dia size

(D) C.I.D.F. rising spindle type, sluice valve with actuators conforming to IS : 14846 suitable for sewage application 350 mm dia size

(E) C.I.D.F. dismantling joint 300 mm dia size

(E) C.I.D.F. dismantling joint 200 mm dia size

(F) C.I.D.F. dismantling joint 350 mm dia size

C.I. pipes and specials - Dismantaling and required replacement of old Main piping Including Common Header bend foundation padestal ,Complete job

(G) C.I. pipes and specials - (i) C.I.D.F. Enlarge 200 mm x 300 mm dia (ii) C.I.D.F. pipe 300 mm dia (iii) C.I.D.F. pipe 350 mm dia (iv) C.I.D.F.90 bend 300 mm dia (v) C.I.A.F. pipe Tee 350 mm x 350 mm x 300/200 mm dia (vi) C.I. blind flange 350 mm dia

(H) Necessary MS, Nut-Bolt and washer for complete and proper installation of piping arrangement and pumps as per direction of engineer incharge

I) Necessary SS Nut-Bolt and washer for complete and proper installation of piping arrangement and pumps as per direction of engineer in charge

(J) Necessary rubber packing of suitable size 300mm,200 mm and 350 mm for complete and proper installation of piping arrangement and pumps as per direction of engineer in charge

Mono rail traveling trolley with actuator operated chain pulley block should confirm to IS 3938 Actuator operated Mono rail traveling trolley with chain pulley block of 5 Ton capacity having 6 mtr. lift complete with hand chain for installation of pumping plants

Sewage level regulator/controller Ultrasonic level regulator/ controller for measuring sewage level in the sump suitable for indication of low and high level in mtrs.

Pressure TRANCMITTER pressure gauge complete with necessary Cu. tubing, stop cock and necessary fittings suitable for sewage applicable

Power and control cable should confirm to IS 694 The 400 sqmm 3.5 core size of cables required for power wiring from sub station to L.T. panel of pump house

LT Cable of suitable size as required for power wiring from L.T. panel of pump house to starters

Earthing confirming to IS 3043 Double earthing of all electrical equipments as per latest IER/PWD specification complete with salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes and G.I. earth strips of adequate size.

Construction of foundation for pumping plants, starters and panels.

Installation of pumping plants and all related equipments at site. As per direction of engineer incharge

Commissioning of all pumping plants and related equipments at site.

Painting of all equipments

Internal and external electrification of pump house, sub-station room and campus.

Spares Supply of spare pump set of similar duty of pumping plant

Tools & Plants: Supply of Tools (i) HT Megger- 1 no. (ii) LT Megger- 1 no. (iii) Hydraulic crimping tool- 1 no. (iv) Manual crimping tool- 1 no. (v) Clamp multimeter- 1 no. (vi) Chain wrench (vii) Pipe wrench (viii) Screw wrench (ix) Ring spanners (x) Double ended spanners (xi) Insulated pliers (xii) Hammer with handle (xiii) Hexa blade frame (xiv) Measuring tape of different size (xv) Sprit level set (xvi) Filler gauge (xvii) Chisel (150, 200mm) (xviii) File (Flat, half round, round and triangular) (xix)Power Drill (xx) Other Tools as specified

(i) Providing, Installation, Testing and commissioning of 350 mm ELECTRO MAGNETIC FLOW METER cum totalizer having following charecteristics/MOC: Liner: Polyurethane or Hard Rubber / Electrode MOC: SS316L /Housing : Die Cast Aluminium or CS / Power Supply: 90-230 V AC / Output: 4-20mA with HART / Sensor Cable : 10 mt / Flow Tube or Sensor housing protection IP68 / Process Flange : SS316 / Display : 3 1/2 LCD Display / Cable Connection : 1/2"NPT /Accuracy : 0.5%

CVT with control cables above flow meter

Mini tubewell for campus water requirement complete in all respect

Pole mounted Solor LED 1*18W Street lighting Fixture Installation

Provision of rubber matting /resistance sheet confirming to IS 15652

Provision of sefty equipment as per direction of engineer incharge

Dredging pump 15 HP with 15 Meter hose pipe ,panel/starter ,cable complete

Exhaust fans of suitable capacity

Manual bar Screen Provision of CR Steel(SS 316) manual coarse bar screen having clear gap between screen bar- 20 mm, size of flat shall be 50mm x 10mm angle of installation 45-50º etc. Complete

Mechanical Bar Screen should confirm to IS 6280 Provision of Stainless Steel (SS 316) mechanical bar screen having clear gap between screen bar- 20 mm, size of SS flat shall be as per actual site requirement angle of installation - 70º duly followed with dismantling of existing manual screen and installation of mechanical screen including all necesary civil work required for proper completion of work , conveyer system, electric motor, starter, cable, panel, bins etc.

Sluice Gate

Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading, unloading, fitting in position including Sluice gates are upward opening wall thimble mounted suitable for isolating the flow of sewer into out of the opening in the wall. It consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The gates will be provided with pads on sides, top and bottom to mount the wedges. The gate shall be designed in such a manner, so that it can be operated at 2 meter head. Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested for tensile strength, Tested for over all dimensions as per approved GA drawing complete in all respect as per specification and direction of Engineer, For by pass

Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading, unloading, fitting in position including Sluice gates are upward opening wall thimble mounted suitable for isolating the flow of sewer into out of the opening in the wall. It consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The gates will be provided with pads on sides, top and bottom to mount the wedges. The gate shall be designed in such a manner, so that it can be operated at 2 meter head. Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested for tensile strength, Tested for over all dimensions as per approved GA drawing complete in all respect as per specification and direction of Engineer, For screen channels

Installation & Commissioning Installation & commissioning of all screens and sluice gates complete.

Supply of silent type DG set , engine ,alternator as per ISO 8528 capable of developing 200 KVA at 415+6% ,50Hz AC at.85 P.F. lagging and self exciting coupled with suitable BHPdiesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel 12 volt lead acide Battery with lead silencer manual control panel & AVM pads D.G. set shall be mounted in open sky resting on the foundation as per the design . DG set should confirm to latest norms of CPCB , SPCB

Synchronising panel /Bus coupler comprising of synchono scop, Frequency meter ,voltmeter etc

Anti-Vibration mountings

Exhaust pipe, fuel line and fuel tank should comply with latest cpcb , spcb norms

Spare parts for D.G. set as per engineer in charge direction

Complete power wiring and earthing of D.G. set and AMF panel as per IER/PWD specification with necessary power and control cable, salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes and G.I. earth strip of adequate size

Construction of foundation of D.G. set and AMF panel as direction of engineer incharge

Installation of D.G. set and other accessories including commissioning and testing as per direction of engineer incharge

Construction of Sub-Station

(A) 11 KV floor mounting, single row type H.T. panel having 1 No. incoming and 2 Nos. outgoing VCB of suitable rating/SF-6 panels complete with insulated bus bars, earthing and all necessary metering and safety equipments.

(A) 0.415 KV L.T. control panel for Substation L.T. control panel having 2 Nos. incoming and 1 Nos. outgoing panels suitable to operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply ,with C.Ts, AVF Meter,KWH meter P.F Meter, Bus Bar chamber, Relays and other Protective Devices Complete in all Respects.

(B) Supply, Installation, Testing and commissioning of copper wound ISI marked Transformer 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type with Standard accessories like, conservator, Silicagel breather, radiator, fins, HT & LT cable end boxes or Bus Duct flange, Lifting lugs, Bi-directional Plain / Flanged Rollers,Earthing terminal,Air relaese plug, Off load tap changer (+5% to -10% in steps of 2.5%), winding / Top oil temperature rise of 45°C/40°C, ISI marked drain valves, Dial type temperature gauge, first fill oil, Epoxy based paint etc conforming to IS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 BEE star level - I as per Govt. of India, Ministry of power notification Dated 16th Dec., 2016. Transformers described as above and as per the following continuous rating: 400kVA

(C) 11 KV XLPE cable of 3.5 x 120 sqmm size Al. armoured cable

(D) Cable Jointing Kit (i) H.T. indoor type

(ii) H.T. outgoing type

(iii) L.T. indoor type

(F) Double earthing of all sub-station equipments complete with salt, charcoal, G.I. earth electrode, C.I. earth boxes, G.I. watering pipe, G.I. earth strip of adequate capacity and labour.

(G) Erection and commissioning of all sub-station equipments

(I) Construction of foundations of Transformers and panels as per direction of engineer incharge

(J) Fencing around outdoor Transformers as per direction of engineer incharge

LOCAL CONTROL STATION GSM/GPRS BASED REMOTE TERMINAL UNITS WITH Analog and Digital Parameter and features as specified to store and transmit data on GSM backbone to MCS and should able to send & received SMS from registered mobile parallel mode

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to MCS with all accessories and should able to send & received SMS from registered mobile parallel mode

Intelligent energy meters as per IS 16444

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IEC: 60947-1& IEC:60947-6-1) of rating 630 Amp

Complete cabling for all pumps as per direction of engineer incharge

STRENGTHENING OF EXISTING Pata Nala Pumping Plant of approve make should confirm with IS 5600- Non clog, single stage, bottom suction submersible sewage pump suitable for handling raw sewage of specific gravity 1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3 phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having following specification- Capacity - 220 LPS RPM - 1000 MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

Accessories of each submersible pumping plant (a) Pedestal with autocoupling (SS) (b) S.S. guide pipe approx (c) S.S. chain with shackles approx (d) C.I.D.F, bend 250 mm dia x 900

Starter of approve make should confirm with IS/IEC 60947 SOFT starter suitable for operation on 415 ± 6 % volt, 3 Phase, 50Hz, AC supply suitable for starting and running of electric motor and 8 to 12 starts and stops per Hr.

Pumping Plant of approve make should confirm with IS 5600 Non clog, single stage, bottom suction submersible sewage pump suitable for handling raw sewage of specific gravity 1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3 phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having following specification- Capacity - 110 LPS RPM - 1500 MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

Accessories of each submersible pumping plant (a) Pedestal with autocoupling (SS) (b) S.S. guide pipe approx (c) S.S. chain with shackles approx (d) C.I.D.F, bend 200 mm dia x 900

Starter of approve make should confirm with IS/IEC 60947 SOFT starter suitable for operation on 415 ± 6 % volt, 3 Phase, 50Hz, AC supply suitable for starting and running of electric motor and 8 to 12 starts and stops per Hr.

Main pipes , valves and specials

(A) Moter operated actuator suitable for 350 mm dia size sluice valve and reflex valve of 350 mm

(B) Moter operated actuator suitable for 250 mm dia size sluice valve and reflex valve of 250 mm

Motor operated spindle type sluice valve for 500 mm dia. size sluice valve

(E) C.I.D.F. dismantling joint 350 mm dia size

(E) C.I.D.F. dismantling joint 250 mm dia size

(F) C.I.D.F. dismantling joint 500 mm dia size

C.I. pipes and specials - Dismantaling and required replacement of old Main piping Including Common Header bend foundation padestal ,Complete job

(G) C.I. pipes and specials - (v) C.I.A.F. pipe Tee 350 mm x 350 mm x 300/250 mm dia (vi) C.I. blind flange 500 mm dia

(H) Necessary MS, Nut-Bolt and washer for complete and proper installation of piping arrangement and pumps as per direction of engineer incharge

(I) Necessary SS Nut-Bolt and washer for complete and proper installation of piping arrangement and pumps as per direction of engineer incharge

(J) Necessary rubber packing of suitable size 300mm,200 mm and 350 mm for complete and proper installation of piping arrangement and pumps as per direction of engineer in charge

Mono rail traveling trolley with actuator operated chain pulley block IS 3177 Actuator operated Mono rail traveling trolley with chain pulley block of 5 Ton capacity having 6 mtr. lift complete with hand chain for installation of pumping plants

Sewage level regulator/controller Ultrasonic level regulator/ controller for measuring sewage level in the sump suitable for indication of low and high level in mtrs.

Pressure TRANCMITTER pressure gauge complete with necessary Cu. tubing, stop cock and necessary fittings suitable for sewage applicable

Power and control cable should confirm to IS 694 The 400 sqmm 3.5 core size of cables or as per design approved by engineer required for power wiring from L.T. panel of sub station to L.T. panel of pump house

Suitable size of cables or as per design approved by engineer required for power wiring from L.T. panel of pump house to starters

Earthing should confirm to IS 3043 Double earthing of all electrical equipments as per latest IER/PWD specification complete with salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes and G.I. earth strips of adequate size.

Construction of foundation for pumping plants, starters and panels. As per direction of engineer incharge

Installation of pumping plants and all related equipments at site. As per direction of engineer incharge

Painting of all equipments

Internal and external electrification of pump house, sub-station room and campus.

Spares Supply of spare pump set of similar duty of pumping plant

Tools & Plants: Supply of Tools (i) HT Megger- 1 no. (ii) LT Megger- 1 no. (iii) Hydraulic crimping tool- 1 no. (iv) Manual crimping tool- 1 no. (v) Clamp multimeter- 1 no. (vi) Chain wrench (vii) Pipe wrench (viii) Screw wrench (ix) Ring spanners (x) Double ended spanners (xi) Insulated pliers (xii) Hammer with handle (xiii) Hexa blade frame (xiv) Measuring tape of different size (xv) Sprit level set (xvi) Filler gauge (xvii) Chisel (150, 200mm) (xviii) File (Flat, half round, round and triangular) (xix)Power Drill (xx) Other Tools as specified

(i) Providing, Installation, Testing and commissioning of 500 mm ELECTRO MAGNETIC FLOW METER cum totalizer having following charecteristics/MOC: Liner: Polyurethane or Hard Rubber / Electrode MOC: SS316L /Housing : Die Cast Aluminium or CS / Power Supply: 90-230 V AC / Output: 4-20mA with HART / Sensor Cable : 10 mt / Flow Tube or Sensor housing protection IP68 / Process Flange : SS316 / Display : 3 1/2 LCD Display / Cable Connection : 1/2"NPT /Accuracy : 0.5%

CVT with control cables above flow meter

Mini tubewell for campus water requirement complete in all respect

Pole mounted Solor LED 1*18W Street lighting Fixture Installation

Provision of rubber matting /resistance sheet confirming to IS 15652

Provision of sefty equipment as per direction of engineer incharge

Dredging pump 15 HP with 15 Meter hose pipe ,panel/starter ,cable complete

Exhaust fans of suitable capacity

Manual bar Screen Provision of CR Steel(SS 316) manual coarse bar screen having clear gap between screen bar- 20 mm, size of flat shall be 50mm x 10mm angle of installation 45-50º .etc Complete

Mechanical Bar Screen Provision of Stainless Steel (SS 316) mechanical bar screen having clear gap between screen bar- 20 mm, size of SS flat shall be as per actual site requirement, angle of installation - 70º duly followed with dismantling of existing manual screen and installation of mechanical screen including all necessary civil works required for proper completion of work,sensors, conveyer system, electric motor, starter, cable, panel, bins etc.

Sluice Gate

Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading, unloading, fitting in position including Sluice gates are upward opening wall thimble mounted suitable for isolating the flow of sewer into out of the opening in the wall. It consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The gates will be provided with pads on sides, top and bottom to mount the wedges. The gate shall be designed in such a manner, so that it can be operated at 2 meter head. Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested for tensile strength, Tested for over all dimensions as per approved GA drawing complete in all respect as per specification and direction of Engineer, For by pass

Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading, unloading, fitting in position including Sluice gates are upward opening wall thimble mounted suitable for isolating the flow of sewer into out of the opening in the wall. It consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The gates will be provided with pads on sides, top and bottom to mount the wedges. The gate shall be designed in such a manner, so that it can be operated at 2 meter head. Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested for tensile strength, Tested for over all dimensions as per approved GA drawing complete in all respect as per specification and direction of Engineer, For screen channels

Installation & Commissioning Installation & commissioning of all screens and sluice gates complete.

Shifting of DG sets from sarkata nala to patanala ,installation of dg sets ,servicing of DG sets.

Synchronising panel /Bus coupler comprising of synchono scop, Frequency meter ,voltmeter etc

Installation of Anti-Vibration mountings as per direction of engineer incharge

Exhaust pipe, fuel line and fuel tank should comply with latest cpcb , spcb norms

Spare parts for D.G. set as per engineer in charge direction

Complete power wiring and earthing of D.G. set and AMF panel as per IER/PWD specification with necessary power and control cable, salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes and G.I. earth strip of adequate size

Construction of foundation of D.G. set and AMF panel as direction of engineer incharge

Installation of D.G. set and other accessories including commissioning and testing as per direction of engineer incharge

Construction of Sub-Station

(A) 11 KV floor mounting, single row type H.T. panel having 1 No. incoming and 2 Nos. outgoing VCB of suitable rating/SF-6 panels complete with insulated bus bars, earthing and all necessary metering and safety equipments.

(A) 0.415 KV L.T. control panel for Substation L.T. control panel having 2 Nos. incoming and 1 Nos. outgoing panels suitable to operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply ,with C.Ts, AVF Meter,KWH meter P.F Meter, Bus Bar chamber, Relays and other Protective Devices Complete in all Respects.

(B) Supply, Installation, Testing and commissioning of copper wound ISI marked Transformer 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type with Standard accessories like, conservator, Silicagel breather, radiator, fins, HT & LT cable end boxes or Bus Duct flange, Lifting lugs, Bi-directional Plain / Flanged Rollers,Earthing terminal,Air relaese plug, Off load tap changer (+5% to -10% in steps of 2.5%), winding / Top oil temperature rise of 45°C/40°C, ISI marked drain valves, Dial type temperature gauge, first fill oil, Epoxy based paint etc conforming to IS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 BEE star level - I as per Govt. of India, Ministry of power notification Dated 16th Dec., 2016. Transformers described as above and as per the following continuous rating: 400kVA

(C) 11 KV XLPE cable of 3.5 x 120 sqmm size Al. armoured cable

(D) Cable Jointing Kit (i) H.T. indoor type

(ii) H.T. outgoing type

(iii) L.T. indoor type

Double earthing of all sub-station equipments complete with salt, charcoal, G.I. earth electrode, C.I. earth boxes, G.I. watering pipe, G.I. earth strip of adequate capacity and labour.As per IS 3043

(G) Erection and commissioning of all sub-station equipments

(I) Construction of foundations of Transformers and panels as per direction of engineer incharge

(J) Fencing around outdoor Transformers as per direction of engineer incharge

LOCAL CONTROL STATION GSM/GPRS BASED REMOTE TERMINAL UNITS WITH Analog and Digital Parameter and features as specified to store and transmit data on GSM backbone to MCS and should able to send & received SMS from registered mobile parallel mode

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to MCS with all accessories and should able to send & received SMS from registered mobile parallel mode

Intelligent energy meters as IS 16444

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IEC: 60947-1& IEC:60947-6-1) of rating 630 Amp

Complete cabling for all pumps as per direction of engineer incharge

STRENGTHENING OF EXISTING Sarkata Nala Pumping Plant of Approve make confirm to IS 5600 Non clog, single stage, bottom suction submersible sewage pump suitable for handling raw sewage of specific gravity 1.03 driven by submersible electric motor suitable for operation on 415 ± 6 % volt, 3 phase, 50 Hz, AC supply system along with 20 mtr. submersible cable and having following specification- Capacity - 230 LPS RPM - 1000 MOC- Casing - 2% NiCi Impeller - CF 8 M Shaft - AISI 410

Accessories of each submersible pumping plant (a) Pedestal with autocoupling (SS) (b) S.S. guide pipe approx (c) S.S. chain with shackles approx (d) C.I.D.F, bend 250 mm dia x 900

Starter of approve make confirm to IEC/IS - 60947 SOFT starter suitable for operation on 415 ± 6 % volt, 3 Phase, 50Hz, AC supply suitable for starting and running of electric motor and 8 to 12 starts and stops per Hr.

Main pipes , valves and specials

(A) Moter operated C.I.D.F. rising spindle type, sluice valve with actuators conforming to IS : 14846 suitable for sewage application 400 mm dia size and reflex valve of 400 mm

Actuator for 800 mm dia sluice valve

(E) C.I.D.F. dismantling joint 400 mm dia size

(F) C.I.D.F. dismantling joint 800 mm dia size

C.I. pipes and specials - Dismantaling and required replacement of old Main piping Including Common Header Complete job

(H) Necessary MS, Nut-Bolt and washer for complete and proper installation of piping arrangement and pumps as per direction of engineer incharge

(I) Necessary SS Nut-Bolt and washer for complete and proper installation of piping arrangement and pumps as per direction of engineer incharge

(J) Necessary rubber packing of suitable size for complete and proper installation of piping arrangement and pumps as per direction of engineer in charge

Mono rail traveling trolley with actuator operated chain pulley block confirm to IS 3177 Actuator operated Mono rail traveling trolley with chain pulley block of 5 Ton capacity having 6 mtr. lift complete with hand chain for installation of pumping plants

Sewage level regulator/controller Ultrasonic level regulator/ controller for measuring sewage level in the sump suitable for indication of low and high level in mtrs.

Pressure TRANCMITTER pressure gauge complete with necessary Cu. tubing, stop cock and necessary fittings suitable for sewage applicable

Power and control cable confirm to IS 694 The 400 sqmm 3.5 core size of cables or as per design approved by engineer required for power wiring from sub station to L.T. panel of pump house

Suitable size of cables or as per design approved by engineer required for power wiring from L.T. panel of pump house to starters

Earthing Double earthing of all electrical equipments as per latest IER/PWD specification complete with salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes and G.I. earth strips of adequate size.

Construction of foundation for pumping plants, starters and panels.

Installation of pumping plants and all related equipments at site.

Commissioning of all pumping plants and related equipments at site.

Painting of all equipments

Internal and external electrification of pump house, sub-station room and campus.

Spares Supply of spare pump set of similar duty of pumping plant

Tools & Plants: Supply of Tools (i) HT Megger- 1 no. (ii) LT Megger- 1 no. (iii) Hydraulic crimping tool- 1 no. (iv) Manual crimping tool- 1 no. (v) Clamp multimeter- 1 no. (vi) Chain wrench (vii) Pipe wrench (viii) Screw wrench (ix) Ring spanners (x) Double ended spanners (xi) Insulated pliers (xii) Hammer with handle (xiii) Hexa blade frame (xiv) Measuring tape of different size (xv) Sprit level set (xvi) Filler gauge (xvii) Chisel (150, 200mm) (xviii) File (Flat, half round, round and triangular) (xix)Power Drill (xx) Other Tools as specified

(i) Providing, Installation, Testing and commissioning of 800 mm ELECTRO MAGNETIC FLOW METER cum totalizer having following charecteristics/MOC: Liner: Polyurethane or Hard Rubber / Electrode MOC: SS316L /Housing : Die Cast Aluminium or CS / Power Supply: 90-230 V AC / Output: 4-20mA with HART / Sensor Cable : 10 mt / Flow Tube or Sensor housing protection IP68 / Process Flange : SS316 / Display : 3 1/2 LCD Display / Cable Connection : 1/2"NPT /Accuracy : 0.5%

CVT with control cables above flow meter

Mini tubewell for campus water requirement complete in all respect

Pole mounted Solor LED 1*18W Street lighting Fixture Installation

Provision of rubber matting /resistance sheet confirming to IS 15652

Provision of safety equipment as per direction of engineer incharge

15 HP Dredging pump with 15 Meter hose pipe ,panel/starter ,cable complete

Exhaust fans of suitable capacity

Manual bar Screen Provision of CR Steel(SS 316) manual coarse bar screen having clear gap between screen bar- 20 mm, size of flat shall be 50mm x 10mm angle of installation 45-50º . Complete

Mechanical Bar Screen Provision of Stainless Steel (SS 316) mechanical bar screen having clear gap between screen bar- 20 mm, size of SS flat shall be as per actual site condition, angle of installation - 70º duly followed dismentaling of existing manual screen and installation of mechanical screen including all necessary civil work with conveyer system, electric motor, starter, cable, panel, bins etc.

Sluice Gate

Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading, unloading, fitting in position including Sluice gates are upward opening wall thimble mounted suitable for isolating the flow of sewer into out of the opening in the wall. It consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The gates will be provided with pads on sides, top and bottom to mount the wedges. The gate shall be designed in such a manner, so that it can be operated at 2 meter head. Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested for tensile strength, Tested for over all dimensions as per approved GA drawing complete in all respect as per specification and direction of Engineer, For by pass

Provision of CI Thimble Mounted Sluice Gate with motor, actuator operated, Rising Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading, unloading, fitting in position including Sluice gates are upward opening wall thimble mounted suitable for isolating the flow of sewer into out of the opening in the wall. It consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces .The gates will be provided with pads on sides, top and bottom to mount the wedges. The gate shall be designed in such a manner, so that it can be operated at 2 meter head. Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS ASTM A276 Type316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested for tensile strength, Tested for over all dimensions as per approved GA drawing complete in all respect as per specification and direction of Engineer, For screen channels

Installation & Commissioning Installation & commissioning of all screens and sluice gates complete.

Supply of silent type DG set , engine ,alternator as per ISO 8528 capable of developing 250 KVA at 415+6% ,50Hz AC at.85 P.F. lagging and self exciting coupled with suitable BHPdiesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel 12 volt lead acide Battery with lead silencer manual control panel & AVM pads D.G. set shall be mounted in open sky resting on the foundation as per the design.noise level and pollution level of D.G. set should comply with latest CPCB norms

Synchronising panel /Bus coupler comprising of synchono scop, Frequency meter ,voltmeter etc

Anti-Vibration mountings

supply Exhaust pipe, fuel line and fuel tank that should meet latest cpcb,upcb norms.

Spare parts for D.G. set as per engineer in charge direction

Complete power wiring and earthing of both D.G. sets and AMF panel as per IER/PWD specification with necessary power and control cable, salt, charcoal, G.I. earth electrodes, watering pipe, C.I. earth boxes and G.I. earth strip of adequate size

Construction of foundation of D.G. set and AMF panel as direction of engineer incharge

Installation of D.G. set and other accessories including commissioning and testing

Construction of Sub-Station

(A) 11 KV floor mounting, single row type H.T. panel having 1 No. incoming and 2 Nos. outgoing VCB of suitable rating/SF-6 panels complete with insulated bus bars, earthing and all necessary metering and safety equipments.

(A) 0.415 KV L.T. control panel for Substation L.T. control panel having 2 Nos. incoming and 1 Nos. outgoing panels suitable to operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply ,with C.Ts, AVF Meter,KWH meter P.F Meter, Bus Bar chamber, Relays and other Protective Devices Complete in all Respects.

(B) Supply, Installation, Testing and commissioning of copper wound ISI marked Transformer 11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type with Standard accessories like, conservator, Silicagel breather, radiator, fins, HT & LT cable end boxes or Bus Duct flange, Lifting lugs, Bi-directional Plain / Flanged Rollers,Earthing terminal,Air relaese plug, Off load tap changer (+5% to -10% in steps of 2.5%), winding / Top oil temperature rise of 45°C/40°C, ISI marked drain valves, Dial type temperature gauge, first fill oil, Epoxy based paint etc conforming to IS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 BEE star level - I as per Govt. of India, Ministry of power notification Dated 16th Dec., 2016. Transformers described as above and as per the following continuous rating: 500kVA

(C) 11 KV XLPE cable of 3.5 x 120 sqmm size Al. armoured cable

(D) Cable Jointing Kit (i) H.T. indoor type

(ii) H.T. outgoing type

(iii) L.T. indoor type

(F) Double earthing of all sub-station equipments complete with salt, charcoal, G.I. earth electrode, C.I. earth boxes, G.I. watering pipe, G.I. earth strip of adequate capacity and labour.

(G) Erection and commissioning of all sub-station equipments

(I) Construction of foundations of Transformers and panels as per direction of engineer incharge

(J) Fencing around outdoor Transformers as per direction of engineer incharge

LOCAL CONTROL STATION GSM/GPRS BASED REMOTE TERMINAL UNITS WITH Analog and Digital Parameter and features as specified to store and transmit data on GSM backbone to MCS and should able to send & received SMS from registered mobile parallel mode

GSM/GPRS based wireless communication hardware for RTUs capable to transfer data from remote site to MCS with all accessories and should able to send & received SMS from registered mobile parallel mode

Intelligent energy meters

Auto Phase reversal unit with inbuilt time delay & enclosure (confirms to IEC: 60947-1& IEC:60947-6-1) of rating 630 Amp

Complete cabling for all pumps as per direction of engineer incharge

Security Survelliance IP Camera

Operation and Maintenance for 15 Years

1st year

2nd year

3rd year

4th year

5th year

6th year

7th year

8th year

9th year

10th year

11th year

12th year

13th year

14th year

15th year

Electricity and fuel charges during O&M for 15 Years for Barikala STP

Guaranteed Energy Consumption in (KwH/MLD) for 1 MLD STP (Note:- The Bidder is required to enter Guaranteed Energy Consumption in (KwH/MLD). The figure 45442.5 is shown in the quantity column, which is the multiplication of 1 MLD- capacity of STP , 5475 days - the number of days over the 15 years, and Rs. 8.30 - the power unit rate. 45442.5=1*5475*8.30 is shown in the quantity column)

Operation and Maintenance for 15 Years

1st year

2nd year

3rd year

4th year

5th year

6th year

7th year

8th year

9th year

10th year

11th year

12th year

13th year

14th year

15th year

Electricity and fuel charges during O&M for 15 Years for Barikala MPS

Guaranteed Energy Consumption in (KwH/MLD) for 1 MLD MPS (Note:- The Bidder is required to enter Guaranteed Energy Consumption in (KwH/MLD). The figure 45442.5 is shown in the quantity column, which is the multiplication of 1 MLD- capacity of STP , 5475 days - the number of days over the 15 years, and Rs. 8.30 - the power unit rate. 45442.5=1*5475*8.30 is shown in the quantity column)

1st year

2nd year

3rd year

4th year

5th year

6th year

7th year

8th year

9th year

10th year

11th year

12th year

13th year

14th year

15th year

Electricity and fuel charges during O&M for 15 Years for 39 mld Daulatganj STP

Guaranteed Energy Consumption in (KwH/MLD) for 39 MLD STP (Note:- The Bidder is required to enter Guaranteed Energy Consumption in (KwH/MLD). The figure 1772257.50 is shown in the quantity column, which is the multiplication of 39 MLD- capacity of STP , 5475 days - the number of days over the 15 years, and Rs. 8.30 - the power unit rate. 1772257.50=39*5475*8.30 is shown in the quantity column)

1st year

2nd year

3rd year

4th year

5th year

6th year

7th year

8th year

9th year

10th year

11th year

12th year

13th year

14th year

15th year

Electricity and fuel charges during O&M for 15 Years for 39 mld Daulatganj MPS

Guaranteed Energy Consumption in (KwH/MLD) for 39 MLD MPS (Note:- The Bidder is required to enter Guaranteed Energy Consumption in (KwH/MLD). The figure 1772257.50 is shown in the quantity column, which is the multiplication of 39 MLD- capacity of MPS , 5475 days - the number of days over the 15 years, and Rs. 8.30 - the power unit rate. 1772257.50=39*5475*8.30 is shown in the quantity column)

Land cost

Total land required for 39 MLD stp & 39 MLD mps at daulatganj . (Bidders are advise to quote area of land required in square mtrs in column no-5)

Total land required for 1 MLD stp & 1 MLD mps at Barikala . (Bidders are advise to quote area of land required in square mtrs in column no-5)

Environmental and Social Management Plan(ESMP) as per scope of tender document

M/s. Ashoka Buildcon Ltd

M/S K.B.SRIVASTAVA