REPAIR AND MIANTENANCE OF GARDEN AND GATE LIGHTS AT MIL STN DAPPAR

Amount

Taking out old unsv LT cable/conductor all as specified and directed by engr-in-charge.

Supply, laying, connecting and testing or passing through pipe, XLPE 1100 volts grade heavy duty underground cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire 10 sq mm 2 core normal cross sectional area complete all as specified and as directed by Engineer-in-Charge.Note : All minor spares such as cable gland, aluminium lugs etc & minor jobs such as cutting, welding etc is deemed to be included in the quoted rates.

Supply and fix in replacement 2.5 sqmm 3 Core as PVC insulated and FRLSH PVC round sheathed Copper conductor (Flexible) industrial cable 1100 Volt confirming to IS 694 as directed by Engr-in-charge.

S & F in replacement of SMC junction box 280x170x130mm from cable looping box to the connector of the luminarie made out of FRP sheet and arrangement 3 phase 4 wire system and control for incoming & outgoing cables with MCB SP 20 Amps 230 volts with neutral link including flat iron 25x3 mm “D” clamps (2 Nos) suitable for mounting of box to pole /Angle of required size & shape including bolts nuts & washers.”NOTE: - The quoted rate is deemed to be inclusive of cost of suitable size incoming & outgoing cable glands & lugs.

Supply and fix weather proof aluminum conductor 4 sqmm 2 core, flat cable for connection from looping box to street light fitting.

Supply and fix weather proof aluminum conductor 6 sqmm 2 core, flat cable for connection from looping box to street light fitting as directed by engr-in-charge.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of CI / GI pipes iiue in trenches and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge .

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at level not exc 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

Returning, filling in trenches including , leveling water and all raming in layers not exc 25 cm in soft / loose soil, complete all as specified and directed by Engr-in-Charge .

M & L sand cushioning (dry sand) to underground cable for cable protection 23 cm thick in two layers (8 cm thick before laying of cables and 15 cm thick after laying the cable and punning down the sand to 18 cm thickness.). Complete all as specified and as directed by Engineer-in-Charge. (Note:- Only punned thickness 18 cm of sand shall be measured for payment purposes).

Supplying and laying un-reinforced precast concrete cable cover, class LV,type 1 flat, size 250mm x 150mm x 40mm all as specified and directed by engr -in-charge.

Taking down old unsv fitting and supply and fix LED flood light fitting 120 watts, IP65 class with separate integral driver and with pressure dia-cast aluminium housing all as per . NOTE - The quoted rate is deemed to be inclusive of cost of minor spares and misc jobs to be carried at site for fittment of luminarie.

Taking down old unsv fitting and supply and fix LED flood light fitting 60 watts, IP65 class with separate integral driver and with pressure dia-cast aluminium housing all as per . NOTE - The quoted rate is deemed to be inclusive of cost of minor spares and misc jobs to be carried at site for fittment of luminarie.

Taking down old unsv fitting and supply and fix LED flood light fitting 30 watts, IP65 class with separate integral driver and with pressure dia-cast aluminium housing. NOTE - The quoted rate is deemed to be inclusive of cost of minor spares and misc jobs to be carried at site for fittment of luminarie.

Taking down old unsv fitting and supply and fix LED Spike light fitting 15 watts, IP65 class with inbuilt driver, worm white/ white/ green/ Saffron colour and with pressure dia-cast aluminium housing. NOTE - The quoted rate is deemed to be inclusive of cost of minor spares and misc jobs to be carried at site for fittment of luminarie.

Taking down old unsv fitting and supply and fix decorative wall light LED fitting 2way/ 3way/ 4way 12 watts, IP65 class with inbuilt driver, worm white/ white/ green/ Saffron colour and with pressure dia-cast aluminium housing. NOTE - The quoted rate is deemed to be inclusive of cost of minor spares and misc jobs to be carried at site for fittment of luminarie.

Taking down old unsv fitting and supply and fix LED Post Top lamp fitting 15 watts, IP65 class with separate integral driver and including 1.2 M Medium grade GI 40mm pipe with black paint with pressure dia-cast aluminium housing. NOTE - The quoted rate is deemed to be inclusive of cost of minor spares and misc jobs to be carried at site for fittment of luminarie.

Taking down old unsv fitting and supply and fix LED Post Top lamp fitting 25 watts, IP65 class with separate integral driver pressure dia-cast aluminium housing. NOTE - The quoted rate is deemed to be inclusive of cost of minor spares and misc jobs to be carried at site for fittment of luminarie.

Material & Labour for cement concrete 1:2:4 type B - 1 using 20mm graded crushed stone aggregate in coping pedestal to poles including provision of necessary frame work finishing the expossed surface even and smooth complete all as specified and directed by Engr-in-Charge.

Supply & fix power contactor 3 pole, type ML-3, with 2 NO + 2 NC aux contacts with standard coil voltage 415 volts, Rating 40 Amp including testing connecting commissioning complete all as specified and directed.

Dismantling and disconnecting unsv. timer, supply, fixing and commissioning Digital type Time switch having sleek MCB shaped design with front display and DIN rail mounting, power reserve for atleast 1500 hrs, operating voltage - 240 V AC, 50 Hz, working temp. upto 55 degree celcius complete with all accessories. as specified in list of makes.

M&L for application of two coats of aluminium/ Metal Black paint with golden design as existing on steel tubular/rail pole of 9/11/13/15 M long externally after removal of old paint, rust, dust, oil, grease or any other foreign deposits by paint removers or burning off by blow lamps, cleaning with scrapers and chemicals for removal of rust for any number of coats of any width or girth incl. numbering of poles in blackbase & white letters paint and incld. painting five no. strips upto 30 cm on bottom of pole with black and red colour paint alternately all as specified and directed by Engr-in-Charge.

M&L in replacenent of Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x2.5 sqmm (line conductor) & 1x 2.5 sq mm (earth conductor), 1100 V grade drawing in & including non metalic PVC conduit Medium grade, ISI marked, incl accessories not less than 25 mm in dia & including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as in earth conductor including cutting charges for concealed conduit wiring whenever reqd as per site requirement etc and making good cutting not exceeding 10 cm grith complete all as specified and directed . Note : (i) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. (ii). Suitable size cable lugs copper fabricated will be measured in the quoted rate only. (iii). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.

Material & Labour for cement concrete 1:4:8 type D- 2 using 40mm graded crushed stone aggregate in foundation filling & mass concrete for poles/struts/stays assembly complete all as specified and directed by Engr-in-Charge.

M & L for earthing with galvanised iron earth plate of size 600x600x6mm thick buried directly in ground not less than 2.25m below normal ground level,earth plate packed on all sides with charcoal mixed with salt in alternate layers of 15 cm thickness connected by galvanised iron earth earth round wire 4.0 mm dia soldered & riveted toearth plate, galvanised iron earth strip will be provided by using 50mm bore galvanised iron pipe (light grade) earth plate to transformer body and neutral or test point of transformer, including fconnected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete including watering galvanised iron pipe 20 mm dia 'Light grade' 2.5mm long the earthing includes PCC pit including necessary earth works and disposal of surplus soil to a distance not less than 50m, chamber of PCC 1:4:8 type D-2 using 40mm graded stone aggregate, coping shall be of PCC 1:3:6 type C-I using 20mm graded stone aggregate, RCC pit cover 50mm thick in1:2:4 type B-I using 20mm graded stone aggregate, rein forced with 8mm dia @ 15cm c/c complete all as shown on sketch No 3 of SSR-I of 2009 and as specified and as directed by Engr-in-Charge.

S&F in repairs 5-32 A SP MCB, 10 kA 'C' series, 240 V AC, 50 Hzcomplete switch gear/components all as specified and directed by Engr-in-Charge

S&F in repairs 32 A SPN MCB, 10 kA 'C' series, 240 V AC, 50 Hzcomplete switch gear/components all as specified and directed by Engr-in-Charge

S&F in repairs 63A TPN MCB, 10 kA 'C' series, 415 V AC, 50 Hz complete switch gear/components all as specified and directed by Engr-in-Charge

Make bore to road width for providing GI pipe medium/light grade both end socketed for passing armoured cable complete all as specifed.

Material and labour for galvanized iron tubing size 50 mm bore (Medium grade) with all necessary fittings laid in trenches under road crossing or fixed on poles / walls / under floors for cable protectioncomplete all as specfied and as directed. Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix of Rigid non-metallic medium PVC conduit 25mm exclusive of boxes (junction/ terminal) minimum 2mm thick but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.as directed by Engr-in-charge.

Supply and fix of DWC HDPE flexiable conduit 50mm, minimum 2mm thickbut inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.as directed by Engr-in-charge.

Supply, laying, connecting and testing or passing through pipe, XLPE 1100 volts grade heavy duty underground cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire 16 sq mm 4 core normal cross sectional area complete all as specified and as directed by Engineer-in-Charge.Note : All minor spares such as cable gland, aluminium lugs etc & minor jobs such as cutting, welding etc is deemed to be included in the quoted rates.

Taking out existing steel tubular Pole and re-erect the same pole on another location including dismantling safely & refixing/ reconnecting of any type of fittings by mechanical means as directed by Engr-in-charge. Note: Excavation / PCC work wil be paid separately.

HARISH SALES CORPORATION (BID ID -3161130)