REPAIR/REPLACEMENT OF DG SETS, VEHICLES AND OTHER MISC WORKS AT MIL STN NAMS UNDER GE NAMS

Amount

M&L for maintenance of DG Set 250 KVA DG set and carrying out 'B' check and replacement/servicing of 'B' check kit filters such as oil filter, by pass filter, fuel filter, CR element and CR plates complete with 'O' rings and draining of Engine oil and topping up with the new engine oil complete testing all as specified and directed by Engr-in-Charge for the following capacity DG Sets : - Note : (i) Necessary tool for replacement of spares for 'B' check shall be deemed to be inclusive in the rate quoted by the contractor. (ii) Spares such as replacement of u/s items incl engine oil, air filter, fuel filter & mobil filter,or any parts of DG sets will be measured & paid separately under respective item as supply only. (iii) Contractor should visit the site before quoting the tender to know the working condition of the station. All requisite safety measurers are to be adopted by contractor on site. (iv) Minor repair work whereever supply only items by contractor for DG sets is to be carried out by DG Set technician. (v). The contractor will be responsible for cleaning/grass cutting/ vegetation cutting upto two meter surrounding of DG Sets. (vi) Necessary welding work required /replacement of door hings etc any other parts shall be deemed to be inclusive in the rate quoted by the contractor. (vii) Supply & fixing & testing after repair items should be executed thorugh authorized rep of manufacturer only and fixing charges to be inclusive in the rate quoted by the contractor mentioed in below respective capacity of DG sets.

Supply only following spare parts as mentioned at Srl No. 01 for 250 KVA DG set above:-

Spinion Lub Oil filter

Fuel Filter (Primary & Secondery)/Cartridge

Primary Air filter element

Safety Air filter element

Oil seal (115x140x12)

Oil Seal (65x85x13)

V Belt XPA 1250 Cogged

Hose pipe Radiator to waterpump 45x45x130L

Hose for Radiator 10 to 100mm

Leak off Pipe Assembly

Fuel pipe 7.5 14x14 B 700 PB

Fuel pipe 8.0 14B 1000WB

Centrifugal filter service kit

Engine Wiring Harness: 6R CPCB

Lube Oil Pressure Sensor

Stop Solenoid assembly : 12V DC

MCx 130 Amp four pole power contactor

Radiator assembly cleaning

All as per Srl item No. 1.00 here-in-before but for 100 KVA DG set

Supply only following spare parts as mentioned at Srl No. 1.00 for 100 KVA DG set above:-

Spinion Lub Oil filter

Fuel Filter (Primary & Secondery)

Primary Air filter element

Safety Air filter element

Cyl Liner assembly

Piston Ring set 105 Dia

Cyl Head Gasket 1.22 MM Thick

Set of joints - 6R1080TA

Valve stem Seal

Oil seal (115x140x12)

Oil Seal (65x85x13)

Set of 'O' rings 6R1080TA 125 KVA

V Belt XPA 1250 Cogged

V belt cogged (BX-48)

By pass hose : 58MM long

Battery Charger -6A, 12V

Hose pipe Radiator to waterpump 45x45x130L

Hose pipe to waterpump 45x45x80L

Crankshaft assembly with gear

Vent pipe for Radiator

Leak off Pipe Assembly

Set of copper washer - 6R1080 TA

Hose water pipe

Fuel pipe 7.5 14x14 B 700 PB

Fuel pipe 8.0 14B 1000WB

Centrifugal filter service kit

Conversion kit from KG 934 to KG 645

Engine Wiring Harness: 6R CPCB

Lube Oil Pressure Sensor

Fuel tank assembly with accessory

Startor 12V 3 KW

Set Screw: M10x1.5x30-8.8

Stop Solenoid assembly : 12V DC

Battery Cable Assembly 70sqmm

Fuse holder with fuse blown indicator

UV/OV protection relay for AMF Panel

Contractor for AMF Panel

Feed Pump W/O Bowl Filter

Banjo Belt :M14x1.5

Kit Fuel Injection pump repair

Injector Calibration

Coper wire

Radiator assembly cleaning

All as per Srl item No. 1.00 here-in-before but for 50/62.5 KVA DG set

Supply only following spare parts as mentioned at Srl No. 1.00 for 50/62.5 KVA DG set above:-

Spinion Lub Oil filter

Fuel Filter (Primary & Secondery)

Primary Air filter element

Safety Air filter element

Oil seal (115x140x12)

Oil Seal (65x85x13)

V Belt XPA 1250 Cogged

By pass hose : 58MM long

Hose pipe Radiator to waterpump 45x45x130L

Hose pipe to waterpump 45x45x80L

Mechanical fuel lavel sencor assembly

Vent pipe for Radiator

Leak off Pipe Assembly

Hose water pipe

Fuel pipe 7.5 14x14 B 700 PB

Fuel pipe 8.0 14B 1000WB

Conversion kit from KG 934 to KG 645

Engine Wiring Harness: 6R CPCB complete replace

Radiator assembly cleaning

All as per Srl item No. 1.00 here-in-before but for 25 to 40 KVA DG set

Supply only following spare parts as mentioned at Srl No. 1.00 for 25 to 40 KVA DG set above:-

Spinion Lub Oil filter

Fuel Filter 1.1 Ltr

Primary Air filter element

Cyl head reconditioning kit

Cyl Liner assembly

Piston Assembly

Cyl Head Gasket 1.22 MM Thick

Set of joints - 6R1080TA

Valve stem Seal

Oil seal (115x140x12)

Oil Seal (65x85x13)

Set of 'O' rings

V Belt XPA 1250 Cogged

By pass hose : 58MM long

Hose pipe Radiator to waterpump 45x45x130L

Hose pipe to waterpump 45x45x80L

Mechanical fuel lavel sencor assembly

Vent pipe for Radiator

Leak off Pipe Assembly

Hose water pipe

Fuel pipe 7.5 14x14 B 700 PB

Fuel pipe 8.0 14B 1000WB

Centrifugal filter service kit

Engine Wiring Harness: 6R CPCB

Fuel tank assembly with accessory

Battery Cable Assembly 35sqmm

Kit Fuel Injection pump repair

Injector Calibration

Copper wiring as per existing

Radiator assembly cleaning

Labour only for attending the breakdown/nonfunctioning of any capacity/make DG sets, AMF panels by deploying one Number Technician & helper for checking all components and rectify the fault and give report to concerned JE complete all as specified and directed by Engr-in-Charge. Note : (i) Spare parts for rectify the fault will be measured and paid separately. (ii) The contractor shall also provide DG Set technician on Sunday & holiday if required or asked by JE E/M/Engineer-in-charge. (iii) If contractor failed to provide their DG Set technician or absent to attend the complaints / minor complaint within 24 Hrs, then the recovery will be effected at Rs 2000.00 per day per complaints.

M&L for Replacement of unserviceable auto main failure (AMF) panel of capacity upto 62.5 to 100 KVA capacity DG set includign all internal electrical connections, sensor, ATC switch, DG on /off facility, Busbar, wire, lugs, cable tray, panel box 18 guage thickness etc complete commissioning & testing all as specified and directed by Engr-in-Charge.Note:- Including following spare parts of AMF panel above quoted rate:-(a) MCx 130 Amp four pole power contactor-02nos,(b) Contactor side block - 02 nos,(c) Du 125 amp three pole Mccb -02 Nos, (d) Spreader link -02 set, (e) Amf controller -01 Nos, (f) 12V/24V battery charger-01 No,(g) Glass Relay-02 Nos, (h) Current Transformer-03 Nos, (j) R,Y,B indicator - 03 Nos,(k) 6 Amp single pole controler MCB-06 Nos,(l) Auxilary Contactor-02 nos.

M&L for drain out old engine oil from DG set/ Vehicle and replace with new Engine oil servo type in 20 Ltrs seal pack 20W/40 & 15W40 or as per site requirement. Make : Castrol/HP/BP/Gulf/KOEL Care

M&L for Inhibitor corrosion (coolant additive concerntrate) required for top up complete all as directed by Engr-in-charge

Supply and topping up of acid mixture suitable for lead acid batteries of 12 volts complete all as directed by Engr-in-charge

Supply and topping up of distilled water suitable for lead acid batteries of 12 volts complete all as directed by Engr-in-charge.

M&L for dismantling of exhaust pipe of the DG set by unscrewing nuts and bolts and taking down the pipe with muffler removing the burnt out asbestos rope and replaced with new asbestos rope, well wrapping with new aluminium metal cladding with glass wool including cleaning the silencer, welding if required, painting and refixing the same in its original position complete all as directed by Engr-in-charge for the following capacity DG sets :-

25 to 40 KVA DG Sets

50/62.5 KVA DG Sets

100/125 KVA DG Sets

250 KVA DG Sets

M&L for Canopy Restoration & Painting of DG set by scrapping of old paint complete and painting with two coats of Aspa super finish paint/as per exisitng colour/make with spray pump applying before polyplaster automative putty on rusted/scratch area of fwg capacity of Dg sets complete all as specified & directed.

25 KVA to 40 KVA

50 KVA to 62.5 KVA

250 KVA DG Sets

M&L for replacement of lead acid battery of cap 150 AH, 12V, complete all as specified and directed. Make : Exide New Xpress or its equivalent Amaron/Luminous

M&L for repair/Replacement of unserviceable automatic voltage regulator (AVR) of capacity upto 62.5 to 100 KVA capacity DG set includign all internal electrical connections, testing all as specified and directed by Engr-in-Charge.

M&L for dismantling of old unservicable door lock with catcher & replace with new LH/RH lock with catcher for canopy of DG set any capacity including welding work if required refixing the same in its original position complete all as specified & directed by Engr-in-charge.

M&L for dismantling of old unservicable door hinges & replace with new SS LH/RH hinges for canopy of DG set any capacity including welding work if required refixing the same in its original position complete all as specified & directed by Engr-in-charge.

M&L for earthing complete with galvanised iron earth plate electrode 600x600x6 mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip of size 32x6 mm and 40 mm dia bore 7.5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 50 X 50 X 60 mm etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009. Note :- (i) All joints either strip to strip of strip to earth plate are fixed with bolt joints. (ii) Earth pit shall be constructed minimum 0.5 mtr away from the earth

Supply and fix in replacement of Galvanised iron strip 32x6mm burried in the ground/pipe/wall and dully connected to machinery with nuts bolts washers and thimbles complete all as spd and directed.

M&L for lifting the Gen Set of capacity 62.5 to100KVA after disconnection complete from cables, shifting to other place whereever directed by engr-in-charge and making PCC foundation of size suitable to existing DG set with 1:2:4 including smooth finishing, shifting of DG set on new foundation with all necessary arrangement of cable connections, testing and commissioning complete all as directed by Engr-in-charge. Note :- all items, manpower including crane for lifting up and placing again on new foundation is included in quoted rates.

M&L for in replacement of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 16 Sqmm x 4 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed Note : Excavation, cable protection work shall be measured and paid seperately)

Description all as per Srl Item No 24.00 above here-in-before but of size 25 sqmm 4 core

Description all as per Srl Item No 24.00 above here-in-before but of size 95 sqmm 3.5 core

Description all as per Srl Item No 24.00 above here-in-before but of size 120 sqmm 3.5 core

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 16 Sq mmx 2 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed .

Excavation in trenches not. exc. 1.5m wide and not exc. 1.5 in deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil.

Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point.

Material and labour for sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations, complete all as specified and directed.

Supply and laying in trenches dry well burnt locally available sub class “B” bricks over sand cushioning for protection of cable complete all as per specified and directed.

EICHER CANTER Comprehensive maint and servicing, oiling, Hub greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, replacement of coolant, brake oil, stearing oil, engine oil, cleaning and maint of radiators, maint of battery with electrolyte solution, distilled water, wheel alignment, cleaning of fuel tank complete all as directed. Note : Major repairs, major spare parts shall be measured and paid seperately.

Supply only following spare parts of vehicle as mentioned at Srl No. 34.00 above:-

Fuel filter (Primery & Secondry).

Oil Filter

Air Filter

Tail light assy

Fan Belt

Wiper motor

Wiper arm with rubber blade

Repair/servicing/cleaning of raditor for cooling finns core tubes bottom and upper tank leakage if any found.

Side mirror

Foot mat

Head light assy (Left & Right)

Cabin light

Indicator light assy (Left & Right)

Grease

Repair and overhauling of defective suspension system and checking of parts such as shock absorber, front spring leaf, centre bolt, front spring leaf hanger, front spring leaf, shackle pin, rear spring leaf, rear spring leaf hanger, rear shackle pin of Eicher veh and complete all as spfd and directed. Note : Major spare parts required shall be measured and paid seperately.

Supply only following spare parts for suspension system of Eicher Veh:-

Shock absorber front

Shock absorber bush

hanger front

hanger rear

Ball Joint

Load Spring various size

Tensioning the road spring upto the required and original position and assembling the same with nuts, center bolt and clamps-04 Nos and bushes complete all as specified and directed

M&L for repair and Calibration of FIP and governor by replacing pump elements, delivery valve, plugs, springs, gaskets sleeves, washers filters etc and testing complete of Eicher.

M&L for repair to self starter by replacing damaged pinions springs etc complete incl rectifications of electric wiring of the engine complete all as directed.

M& L for repair /rewinding of unsv alternator (dynmo) of Veh Eicher Canter complete all as specified and directed.

MOTOR CYCLE HERO HONDA /HF DELUXE Comprehensive maint and servicing, washing, oiling, greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/oil filters, replacement of bulbs, fuses, repairing of wiring, maint of battery with electrolyte solution, distilled water complete all as directed. Note : Major repairs, major spare parts shall be measured and paid seperately.

Supply only following spare parts of vehicle as mentioned at Srl No. 41.00 here-in-before :-

Speedometre cable

Spark plug

Indicator Assy front side

Indicator Assy rear side

Horn Assy

Oil Filter

Chain Spocket

Clutch/Race cable

Chain with revet

Side mirror

Front light assy complete

Rear light assy complete

Repair and overhauling of defective shocker system of motor cycle and carry out the repair including replacement of the defective spare parts and assembling the same and testing complete all as specified and as directed. Note : Major spare parts required shall be measured and paid seperately.

Supply only following spare parts for shocker system of motor cycle :-

Rear shocker

Oil pump in built front shocker

hydraulic oil

Shock Absorber

Repair and overhauling of defective brake system of motor cycle, replacement of defective spare part like brake shoe etc and assembling the same with testing complete all as specified and as directed.

Taking out old seat cover and fixing new seat cover (complete set of motor cycle) after necessary repair of original seat and cushion by stitching the worn out seat, fitting seat materials of good quality and fixing the same to their proper place neatly complete all as specified and as directed.

Dismantling and taking down the gear box of MC repair and overhauling including replacement of worn spare parts and testing completed all as specified and as directed.

M & L for repair /rewinding of unsv altornator (dynmo) MC self starting type system defected any type complete repair deemed to be quoted rate complete all as specified and directed.

MARUTI DZIRE (STAFF CAR) Comprehensive maint and servicing, washing, oiling, greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/oil filters, replacement of bulbs, fuses, repairing of wiring, maint of battery with electrolyte solution, distilled water complete all as directed. Note : Major repairs, major spare parts shall be measured and paid seperately.

Supply & fixing of following car accessories for vehicle Maruti Suzuki Dzire (Staff Car) are as under :-

Fuel filter (Primary & Secondary)

Oil filter

Air filter

Perfume 250 ml.

Matting complete set.

Computerized alignment and balancing of wheels

Seat Cover complete set

TATA XENON /TATA Mobile 207 DI Comprehensive maint and servicing, oiling, Hub greasing, tuning, overhauling fixture accessories replacement of first moving parts changing oil/oil filters, replacement of bulbs, fuses, repairing of wiring, maint of battery with electrolyte solution, distilled water and replacing all the monogram with new monogram and letter writing with redium retro letter writing complete all as directed. Note : Major repairs, major spare parts shall be measured and paid seperately.

Supply only following spare parts of vehicle as mentioned at Srl No. 51.00 here-in-before :-

Oil Filter

Fuel filter (Primery & Secondry).

Staring cover

Mud flap for veh

Complete set of Mat including floor mat of the vehicle.

Side mirror

LED fog light complete assy (L+R)

Head light complete assy (L+R)

Indicator light assy (L+R)

Fan Belt

Fuel Tank cleaning

Wiper arms with blade

Wiper moter with pipe & connected items

Air cleaner filter element

Door lock assembly complete set

Horn Assy

Raditor servicing/cleaning incl. repair if any water leakge found.

Computerized alignment and balancing of wheel

Grease

Repair and overhauling of defective brake system and checking of parts such as front disc brake, rear wheel cylinder, master cylinder, rear brake shoe, front disc brake pad, front disc break caliper assembly complete brake pipe, rear wheel brake shoe spring & locking assembly and testing complete all as specified and as directed. Note : Major spare parts required shall be measured and paid seperately.

Supply only following spare parts for braking system mentioned in above item no 53.00 :-

Front brake disc

Rear wheel cylinder kit

Rear brake shoe

Pressure plate

Rear wheel brake shoe spring & locking assembly

Clutch plate

Repair and overhauling of defective shafting system and checking of parts such as propeller shaft, centre bearing, centre bearing clamp and rubber pad, universal cross, yok, teeth and testing of Tata Mobile/Xenon/Eicher complete all as directed. Note :- Major spare parts required shall be measured and paid seperately.

Supply only following spare parts for shafting system mentioned in above item no 55.00 :-

Centre bearing

Tie rod with end set

Centre bearing clamp

U J Cross bearing

Repair and cleaning of defective silencer assembly including necessary cutting, welding, cleaning and assembling complete of Tata Mobile/Eicher all as specified and directed. Note : Major spare parts required shall be measured and paid seperately as supply only.

Supply only following spare parts for Silencer Assembly of Tata Mobile/Eicher as per above item No.57.00/-

Muffler

Manifold

Silencer pipe Assy

Taking out old seat cover and fixing new Leather seat cover (complete set front and back) after necessary repair of original seat and cushion by stitching the worn out seat, fitting seat materials of good quality and fixing the same to their proper place neatly complete of Tata Mobile/Xenon all as specified and as directed.

Dismantling and taking down the gear box of repair and overhauling including replacement of worn spare parts i.e. gear liver kit, Gear pinion 1st, 2nd, 3rd, 4th and 5th and other minor spares and testing of Tata Mobile/Xenon completed all as directed.

Taking down old unserviceable silencer replace with new silencer of Tata Mobile/Xenon including necessary accessories as per OEM and assembling complete of all as specified and directed.

Dismantling and taking out defective water pump from Tata Mobile/Xenon and supply & Fixing new water pump with complete accessories as per existing OEM complete the re-assembling the same after testing and commissioning comlete all as specified & directed.

Dismantling and taking out defective water pump from Eicher and supply & Fixing new water pump with complete accessories as per existing OEM complete the re-assembling the same after testing and commissioning comlete all as specified & directed.

Taking out old front wind shield glass and fixing new front wind shield glass with wind shield glass paste,moulding packing etc complete necessary work as required of good quality complete of Tata Xenon all as specified and as directed.

Taking out old front bumper and fixing new bumper(complete set front side) after necessary repair work as required of good quality and fixing the same to their proper place neatly complete of Tata Xenon all as specified and as directed.

M&L for repair of Engine and calibration of FIP and governor by replacing pump elements, delivery valve, plugs, springs, gaskets sleeves, washers filters etc complete all accessories as required of Tata Mobile/ Xenon and testing complete.Note:- The quoted rate deemed to be inclusive of manpower, Engine accessoriesas as required ,charges for transporting engine to workshop and back after repairs & testing complete.

Supply, fixing, connecting & testing battery 12 volts,80 AH for Tata Xenon/Tata Mobile/Eicher Vehicle with lead acid terminal, indications of charging position and terminal for connection etc initial charging and taking out the old battery complete all as specified and directed.Make: Exide/ Amaron/ livguard.

Supply, fixing and connecting & testing battery 12 volts, 2.5 AH for Hero Honda motor cycle Vehicle with lead acid terminal, indications of charging position and terminal for connection etc initial charging and taking out the old battery complete all as specified and directed. Make:- Exide/ Amaron/ livguard.

M&L for repair to self starter and battery charger/ Dynamo by replacing damaged pinions springs etc. complete incl rectifications of electric wiring of the engine complete Tata Mobile/Xenon.

M&L for repair/ rewinding of unsv alternator (dynmo) of Veh Tata Mobile/Xenon complete all as specified and directed.

Supply and fixing in replacement of tubeless tyre of size 215/75R16 or as per OEM suitable for Tata Xenon and taking down old cover outer complete all as spd and directed. Make: MRF/ Apollo/ Bridgstone/JK.

M & L for scraping out old painted surface of vehicles TATA Mobile and prepairing the base of complete interior & exterior with one coat of 2k paint and after then apply one finishing coat with 2K paint mix with hardness complete by using spray machine including polyplaster super finishing putty apply on scraping, minor denting etc. complete all as specified and directed.

M & L for scraping out old painted surface of vehicles Eicher and prepairing the base of complete interior & exterior with one coat of 2k paint and after then apply one finishing coat with 2K paint by using spray machine including polyplaster super finishing putty apply scraping, denting etc. complete all as specified and directed.

M & L for repairing the dent at diffrent location/ patches on surface of vehicles TATA Mobile and prepairing the base with one coat of 2k paint and after then apply one finishing coat with 2K paint by using spray machine on repaired surface to match the existing colour etc complete all as specified and directed.

Supply only Brake oil of suitable grade as recommended by OEM or authorised ageny for vehicles complete all as specified and directed. Make:- Castrol/ Shell/ Gulf

Supply only Gear oil of suitable grade as recommended by OEM or authorised ageny for vehicles complete all as speciied and directed. Make: Castrol/ Shell/ Gulf

M & L for replacement of complete wiring with new wiring including all connected accessories suitable for Tata Xenon/Eicher complete all as directed.

M & L for charging of AC gas as per OEM complete with testing & servicing of Air conditioning of Vehicle including all connected accessories suitable for Tata Xenon/Dzire complete all as directed.

M & L for replacement of complete wiring with new wiring including all connected accessories suitable for Motor Cycle Hero Honda complete all as directed.

S&F in repair for cable end termination joint suitable for 1100 volt grade XLPE LT cable, outdoor type terminal heat shrinkable type joint complete with all jointing material and accessories suitable for 3.5/4 core PVC/XLPE insulated armoured cable of size upto 70 to 150 Sqmm 3.5/4 core complete all as specified and as directed.

S & F in replacement of MCCB four pole 100 Amps with breaking capacity 16KA , 415 Volts, fixed thermal & magnetic release including making all incoming/ outgoing connections fixed & MCCB matching with the existing slots complete all as specified and directed by Engineer in Charge.

S & F in replacement of MCCB four pole 200 Amps with breaking capacity 36 KA , 415 Volts, adjustable thermal & fixed magnetic release including making all incoming/ outgoing connections fixed & MCCB matching with the existing slots complete all as specified and directed by Engineer in Charge.

S&F in replacement of ON load change over switch with sheet metal enclosure, 415 V, 4 pole of capacity 315/320 Amps including connecting up incoming and outgoing cables with suitable lugs and testing complete all as specified & directed.

S&F in replacement of ON load change over switch with sheet metal enclosure, 415 V, 4 pole of capacity 250 Amps including connecting up incoming and outgoing cables with suitable lugs and testing complete all as specified & directed

M & L for cleaning of installation/ substation including clearing of vegitation, wild growth and trimming of grass etc around the installation compound and removing rubbish off the premises and repair the existing iron angle if they are hanging outside to be fixed/buried in ground properly complete all as specified and as directed by Engr-in-charge.

M & L for washing the complete light vehicle (PC) vehicle with foam removing all dust particles from outside and inside using vacuum cleaner, including polishing dash board or other internal parts, greasing, tightning the loose nuts, bolts etc. complete all as directed.

M & L for washing the complete heavy vehicle (LCV) vehicle with foam removing all dust particles from outside and inside using vacuum cleaner, including polishing dash board or other internal parts, greasing, tightning the loose nuts, bolts etc. complete all as directed.

Mahajan Builder

kailu construction co

sanjeev enterprises

KARACHI ELECTRIC & TRADING CO.

SUN CHEMICALS

PAWAN KUMAR GOVT. CONTRACTORS