ADDITIONAL / ALTERATION AND SPL REPAIR TO BUILDING NUMBER SL-31 AT MILITARY STATION MOUNT ABU UNDER AGE (I) UDAIPUR

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed.

S & F prepainted 0.50 mm thick galvalume aluminium zinc AZ-150 coating GI based corrugated steel coloured Sheet having tensile strength of 550 Mpa as in roof covering & on chajjas fixed with self tapping at aliternate corrugation screws as spd etc., complete all as specified and directed.

S & F prepainted 0.50 mm thick galvalume aluminium zinc coating GI based corrugated steel coloured Sheet having tensile strength of 550 Mpa as in roof serrated ridge fixed with self tapping screws as spd etc., complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for rolled mild steel sections in rafters, purlins and posts or hollow square pipe as in tiles battens/ purlins, nut bolts etc . where connected to common rafters and runnuing rails fixed with angle cleats or other connecting plates and nut, bolts etc. confirnimg to Fe-290 (Gde E-165), complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast con-crete articles, complete all as specified and directed.

M/L for brick work with kiln burnt bricks built in cm (1:6) using sub class 'B' bricks of compressive strength not less than 35 Kg/Sqcm straight or curved on plan exceeding 6 mtr mean radius with old size bricks all shown on drawing and as specified.

M & L for fabrication of pressed steel cupboard shutter using 1mm thic MS sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces and two coat of hammer tone finish on external surface along with locking arrangement mortice lock, handle etc complete all as per drg No CEJZ/TD/12/2008 sheet 1/3 to 3/3, complete all as specified and directed.

Taking down cement plaster on brick/stone walls etc including raking out joint, hacking for key scrubbing down with water etc., complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:6 on walls, surface finished even & smooth without using extra cement etc., complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof/ceiling mixed with and including liquid water proofing compound as per manufacturers' instn surface finished even and smooth without using extra cement, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, complete all as specified and directed.

Demolition of RCC (reinforcement cut as required to facilitate demolition), complete all as specified and directed.

Material and labour for RCC(1:2:4) type B0, using 12.50 mm graded stone aggregate in chajjas, lintels, roof ceiling, drops etc., complete all as specified and directed.

Material and labour for RCC(1:2:4) type B1 using 20 mm graded stone aggregate in slab supported on wall,decks slab etc., complete all as specified and directed.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items flat, including edges

M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in fdn, surface channel,cills copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges, complete all as specified and directed.

M&L PCC type B-0, 1:2:4 (using 12.50 mm graded stone aggregate). 25mm thick in floor, surface finished even & fair, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L coloured Non Skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:6, complete all as specified and directed.

M & L for vitrified digital double charge tiles 8-9mm thick (square or rectangular) polished, area of each tile of size 600mm x 600mm x 8-9mm thick, in floors etc.set and jointed with Balendura adhesive or equivalent as approved by AGE and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer with CM 1:6, complete all as specified and directed.

M&L for coloured glazed ceramic tiles300 x 600 x 7 mm thick, on vertical surfaces such as dados and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to matchover 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete, complete all as specified and directed.

M&L Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets, complete all as specified and directed.

Material and labour Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

S & F for suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board Everest white water proof ceiling board incl applied one coat of acrylic emulsion paint to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and, complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame), complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame), complete all as specified and directed.

M&L IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned a joints complete.

M&L for 35mm thick factory made ASCU vacuum pressure treated kiln seasoned IInd class hard wood plain framed panel shutter (two panels or more) with lock rails and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veering on both faces. The size of rail and style as per I.S. 1003(Part-I)2001 ,complete all as specified and directed.

S & F for glazed and skeleton shutters 30mm thick, II nd class hard wood, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats, complete all as specified and directed.

S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc., complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F aluminium handle size & shape as per existing handle for aluminium door or 200 mm long etc. all as directed.

S & F Aluminium anodised or powder coated door, window, ventilator ,cabin partiton frame with one or more rebates and shutter sliding or casement windows as reqd . including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified and directed by Engr-in-charge.

S&F 5.50 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F 100mm long butt hinges med wt cold rolled stainless steel and fixed, complete all as specified and directed.

S&F 300 mm long Aluminium sliding door bolts, bolt type bolt 16 mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed, complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed, complete all as specified and directed.

S&F 150mm long aluminium anodised handle cast type and fixed, complete all as specified and directed.

S&F 100mm long aluminium anodised handle cast type and fixed, complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 3mm thick sheet glass, plain or tinted ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane, complete all as specified and directed.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample, complete all as specified and directed.

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair, complete all as specified and directed.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors concealed or open of any length/short length including taking down or up all as specified and directed by Engr-in-charge.

S&F 20 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length/short length including taking down or up all as specified and directed by Engr-in-charge.

S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia all as spd and directed.

S&F in repair Bib taps, 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore angular stop cock with wall flange, cast copper alloy CP fancy type screwed down high pressure screwed for iron pipe or for union all as specified and directed by Engr-in-charge.

S&F in repair soap dish, recessed type, stainless steel, fixedcomplete all as specified and directed. (

S&F in repair overhead shower 80mm dia Round Shape Single Flow (ABS Body Chrome Plated With Gray Face Plate) with Rubit Cleaning System, complete all as specified and directed.

S&F toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws etc., complete all as specified and directed.

S & F for CP brass fancy type towel ring square with round flange fixed complete all as specified and directed. (

S & F in repair CP brass fancy type jet spray with flexible tube etc complete all as specified & directed.

Supply and fixing in repair angle valve two way with wall flange, 15mm dia chromium plated, cast copper alloy, complete all as specified and directed. )

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge.

S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed.

Supply & fixing for Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,or in floor or fixed to walls size 100mm bore dia, complete all as specified and directed.

S&F PVC (SWR) pipe with fittings single socketed in any length with rubber ring joints laid in tranches or in floor or fixed to walls with clamps etc. of 110mm dia, complete all as specified and directed.

S & F PVC (SWR) pipes with fittings single socketed in any length with rubber ring joints laid in tranches or in floor or fixed to walls size 75 mm bore with stack clamps etc., complete all as specified and directed.

S & F PVC (SWR) multi floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)., complete all as specified and directed.

Removing building materials to a distance of 100m or under, beyond the lead incl in the rates incl loading, unloading and stacking at the destination, complete all as specified and directed.

Supply only liquid water proofing compound ISI marked, complete all as specified and directed.

Complete removal of existing surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of walls complete all as specified and directed.

M&L two coats of oil bound distemper (acrylic) white or tinted over and including 2 mm thick wall care putty including preparation of new or old plastered surfaces of walls etc., complete all as specified and directed.

Material and labour for preparation of newly/old plastered surface of wall and applying two coats of weather coat incl a coat of wall care putty paint complete all as specified.

M&L two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer incl preparation of surfaces, complete all as specified and directed.

Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth, complete all as specified and directed.

M&L two coat of synthetic enamel paint over old/new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces, complete all as specified and directed.

S & F for Brass CP mixer, telephonic type, 15 mm for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe incl connection to out going pipe and flushing pipe complete all as specified and directed.

S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge.

S&F repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.

S & F for health faucet (hand shower), 8 mm dia, 1.2 m long flexible tube and wall hook with N.R.V (back flow preventer) fixed complete all as specified and directed.

S&F in repair Corner glass shelf size 200 mm radius with bracket and glass complete set etc., complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm, including 32 mm size CP brass waste fittings, PVC waste pipe 32 mm flexible type but excluding taps, chain & plug and porcelain stopper but incl brackets or fixed to walls with anchor fastners all as specified and directed.

S&F in repair Glass shelf size 500 X 125 mm radius with bracket and glass complete set etc., complete all as specified and directed.

S&F basin mixture, single lever, with 450 mm long braided hoses complete all as specified and directed

S&F towel shelf, 600mm long with lower hangers, stainless steel fixed complete all as specified and directed by Engr-in-charge.

Taking down carefully aluminum/copper point wiring (light/fan/socket/power) complete including fittings such as switch, socket, ceiling roses light fittings etc and and making good disturbed surface of wall all as specified and directed by Engineer-in-Charge. (Serviceable light fitting to be kept separately for re-use).

M&L for point wiring 1.5 Sqmm nominal area PVC insulated and unsheathed multistranded copper conductor FRLS in PVC concealed concuit with suitable metal box and hylem sheets with multistranded insulated solid copper earth continuity conductor of size 1.5 sq mm complete all as specified and directed by Engr-in-Charge :-

(a) One light point controlled by one switch one way

(b) One fan/exhaust fan point controlled by one switch one way

(c) One socket out let 5 Amps 3 pin on independent board

(d) One socket out let 5 Amps 3 Pin on same board with other switch

All as per item No 91 here in before but with cable size 2.5 Sqmm for one 5 pin 15 Amps socket out let on independent board and multistanded insulated solid copper earth continuity conductor of size 2.5 Sq mm all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 5 Amps single pole one way.

S&F socket out let 2 in 1 multi pin 5 Amps flush type universal.

S&F switch socket combination 2 in 1, multi pin 5 Amps/15 Amps flush type universal.

S&F Ceilling rose on PVC board size 65 X 50 mm three terminal Complete.

S&F Angle holder backelite complete all as specified.

S&F fan regulator electronic step type, 230 volt , 50 Hz complete all as specified.

S & F MCB DB TPN 04 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail complete all as specified.

S & F MCB DB SPN 8 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail double door complete all as specified.

S&F MCB TPN 40 to 100A, Curve 'C' 415 volts complete all as specified.

S&F MCB single pole and neutral, Curve 'C' 240 volts 32 Amps complete all as specified.

S&F MCB single pole and neutral, Curve 'C' 240 volts 40 to 63 Amps complete all as specified.

S&F MCB single pole, Curve 'C' 240 volts 5 to 32 Amps complete all as specified.

S & F MCCB 415V, 16 Ka, 4 Pole, 125 Amp complete all as specified.

M & L for sub main wiring with 2 x 4 Sqmm copper conductor (Multistandered) 1 x 4 sqmm copper conductor wire as earth continuity in PVC counduit all as directed.

S & F sheet metal enclosure with socket plug top and MCB 20amp 240v complete all as specified.

Supply and Fixing LED tube light fitting 18 watt, 4 feet long all as per directed by Engr-in-Charge .

Supply and Fixing LED tube light fitting 10 watt, 2 feet long all as per directed by Engr-in-Charge .

Taking down old u/s exhaust fan and supply and fixing exahust fan steel body AC single phase, 230V of size 300mm sweep with blades and frame and louvers complete all as specified.

Refixing/Hanging only ceiling Fan and connectiong up including provision of cable from ceiling rose or connector to fan.

Taking down old Sheet metal enclouser and supply and fix new sheet metal enclouser cubical type factory fabricated made out of 1.6 mm thick CRCA sheet with front side openable single door system powder coated painted to shade RAL 7032, PL Gasket, hinged single door ,IP-55 mounting plate made out of 2mm thick CRCA sheet steel and earth bolts etc. of size 600x500x200mm all as speceified & directed by Engr-in- charge. Note :-- Cost of any minor modification if required in fixing of the sheet metal enclouser as per site requirement and making good the disturbed surfaces matching with existing finish, will be deemed to be included in the cost of this item.

Earthing complete with GI steel earth plate eletrode 60 cm X 60 cm X 6.3mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground,connected to Gl iron or steel earth wire 4 mm dia (8 SWG) by means of nuts,bolts checks nuts and washers made of Gl iron or steel earth wire protected by Gl iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC coverslab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges,necessary excavation and earth work in any type of soil complete all as shownin electrical plate No 3 of MES schdule part-I and testing after completion

shri balaji trading corporation

shree nathji trading corporation

M/s SUNIL ENTERPRISES