REPAIR MAINTENANCE TO INTERNAL ELECTRIFICATION INCLUDING FLP FITTINGS AT HEMRL UNDER GE RD PASHAN

Amount

Taking down copper/aluminium point wiring casing & caping (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc. complete all as specified and directed.

Taking down copper/aluminium point wiring PVC conduit (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc complete all as specified and directed.

Taking down copper/aluminium point wiring except PVC conduit / Steel conduit pipe (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, floors, etc complete all as specified and directed.

Taking down flameproof SSC single phase / three phase complete all as specified and directed by Engineer-in-charge.

Material and labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable drawn into & including PVC casing capping with all fittings and accessories with PVC box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc; including one continous run of PVC FRLS insulated green colour 1.5sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly complete all as specified and directed for the following point :- Note : Switches, sockets, ceiling rose, regulator shall be measured and paid for separately. (a) One light /fan point controlled by one; one way switch.

(b) One 3 pin socket out let 5 Amp independent point.

(c) One 3 pin socket out let 5 Amp point on the same board with other switches.

All as per Ser no item 5 herein before but with 2.5 sqmm size PVC FRLS insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC FRLS insulated green in colour 2.5 sqmm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable drawn into & including PVC conduit with all fittings and accessories with PVC box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc; including one continous run of PVC FRLS insulated green colour 1.5 sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly complete all as specified and directed for the following point :- Note : Switches, sockets, ceiling rose, regulator shall be measured and paid for separately. (a) One light /fan point controlled by one; one way switch.

(b) One 3 pin socket out let 5 Amp independent point.

(c) One 3 pin socket out let 5 Amp point on the same board with other switches.

All as per Ser item 9 herein before but with 4sq mm size PVC FRLS insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC FRLS insulated green in colour 4.0 sqmm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand copper conductor FRLS cable rawn into existing PVC conduit/ERW steel conduit concealed into wall or on surface with all fittings and accessories with PVC box fixed with CP screws and cup washers for mounting fitting like switches, sockets and fan regulators etc; including one continous run of PVC FRLS insulated green colour 1.5sq mm multi stranded copper conductor cable earth wire and connected to common earth dolly complete all as specified and directed for the following point :- Note : Switches, sockets, ceiling rose, regulator shall be measured and paid for separately. (a) One light /fan point controlled by one; one way switch.

(b) Two light /fan point controlled by one; one way switch.

(d) One 3 pin socket out let 5 Amp independent point

(e) One 3 pin socket out let 5 Amp point on the same board with other switches.

All as per sl item 13.0 herein before but with 4sq mm size PVC FRLS insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continuos run of PVC FRLS insulated green in colour 4.0 sqmm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and directed.

Supply and fix PVC FRLS Armoured Copper cable of 1.5 sqmm x 3 core including saddling on wall / surface complete all as specified and directed.

Supply and fix PVC FRLS Armoured Copper cable of 2.5 sqmm x 3 core including saddling on wall / surface complete all as specified and directed.

Supply and fix PVC FRLS Armoured Copper cable of 4 sqmm x 4 core including saddling on wall / surface complete all as specified and directed.

Supply and fix PVC FRLS Armoured Copper cable of 6 sqmm x 4 core including saddling on wall / surface complete all as specified and directed.

Supply and fix PVC FRLS Armoured Copper cable of 10 sqmm x 4 core including saddling on wall / surface complete all as specified and directed.

Supply and fix Flameproof switch of LM 6 body, rotary switch, SP, 16 Amps for ON / OFF light / fan point to operate on single phase 230 Volts, AC CMRI certified IS-2145 complete all as specified and directed. Make : Sudhir Cat No. RI/A/146/ Shyaam/Baliga/ Crompton

Supply and fix flameproof switch socket combination suitable for 2P+E 16 Amps, 250 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge. Make : Sudhir Cat No. SS/OA/1010-1/ Shyaam/ Crompton

Supply and fix flameproof switch socket combination 2P+E suitable for 25 Amps to 32 Amps, 250 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge. Make : Sudhir Cat No. SS/OA/1010-3/ Shyaam/ Crompton

Supply and fix flameproof switch socket combination suitable for 3P+E 16 Amps 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge. Make : Sudhir Cat No. SS/OA/1010-2/ Shyaam/ Crompton

Supply and fix flameproof switch socket combination suitable for 4P+E 32 Amps 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge. Make : Sudhir Cat No. SS/187 / Shyaam/ Crompton

Supply and fix flameproof switch socket combination suitable for 3P+E 32 Amps, TPN, 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge. Make : Sudhir Cat No. SS/187 / Shyaam/ Crompton

Supply and fix flameproof switch socket combination suitable for 4P+E 63 Amps, TPN, 500 volts including plug and top, LM-6 body, CMRI certified, ISI marked complete all as specified and directed by Engineer-in-charge.

Supply and fixing FLP flexible metalic hose conduit 20 mm dia 300 mm long complete all as specified and directed.

Taking down existing unserviceable submain any type wiring alongwith complete accessories and making good the disturbed surfaces complete all as specified and directed by Engineer-in-charge.

Material and labour for sub main wiring with single core, multistranded PVC FRLS insulated unsheathed cable 1100 volts grade with copper conductor, drawn in and including PVC rigid conduit/Casing Capping , conduit fittings and accessories on surface wall/roof/floor with one run of suitable size PVC FRLS insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dully all as specified and directed for following size :- NOTE :- 4 runs of main wire alongwith 1 run of earth wire and one run of steel conduit pipe shall be measured as one unit. Make : Sudhir Cat No. SS/214/ Shyaam/ Crompton a) 4 X 6 sq mm + 1 X 6 sq mm earth wire

b) 4 X 4 sq mm + 1 X 4 sq mm earth wire

c) 4 X 2.5 sq mm + 1 X 2.5 sq mm earth wire

Supply and fixing FLP junction box LM6 material 20mm entry 4 way complete all as specified and directed.

Supply and fixing in repairs LED Flameproof fluorescent tube light 2 X 18/20 watts with lumen out put not less than 4000 Lumens fittings,body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flame proof clear glass tubing to house LED fluorscent tube along with suitable integrated electronic drivers; complete including 2 x 18/20 W LED fluorescent tube fixed to wall / roof including necessary fixing arrangments such as flexible conduit etc CMRI approved and connecting up completely all as per IS-2148 complete all as specified and directed by Engineer-in-charge. Make : Sudhir Cat No. SS/1272/ Shyaam/ Crompton

Supply and fixing in repairs Flameproof / Weatherproof LED Well Glass Light Fitting suitable for 80 Watt with lumen out put not less than 4400 Lumens, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with Led chip - Osram smd / Citizen / Epistarincluding suitable electronic including necessary fixing arrangments and connecting up completely all as Gas Gr. IIA, IIB Certified by CMRI Dhanbad & CCOE (PESO) Nagpur along with ISI marking Glass complete all as specified and directed. Make : Sudhir Cat No. SS/1239/ Shyaam/ Crompton

Supply and fixing in repairs Flameproof / Weatherproof LED Well Glass Light Fitting suitable for 60 Watt with lumen out put not less than 6000 Lumens, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with Led chip - Osram smd / Citizen / Epistarincluding suitable electronic including necessary fixing arrangments and connecting up completely all as Gas Gr. IIA, IIB Certified by CMRI Dhanbad & CCOE (PESO) Nagpur along with ISI marking Glass complete all as specified and directed. Make : Sudhir Cat No. SS/1234/ Shyaam/ Crompton

Supply and fixing Switch piano, flush type single pole, one way, 5 Amps, 240 volts complete all as specified and directed.

Supply and fixing switch socket combination 2 in 1, 3 pin, 5 Amp, flush type complete all as specified and directed.

Supply and fixing socket 5 in 1, 6 pin, 5A/16A flush type complete all as specified and directed.

Supply and fixing socket 5 in 1, 6 pin, 5A flush type complete all as specified and directed.

Supply and fixing Ceiling rose surface Bakelite, 65x50mm three terminals 230 Volts, AC Single phase complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed.

Supply and fixing in repairs endura linear LED light fitting 4 feet extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver diffused optics with 20 W LED 6000K (4 feet) including PVC three core flexible copper conductor cable from ceiling rose to connector of fittings complete all as specified and directed. Make : Havells/ Philips/ Wipro/Crompton

Supply and fixing in repairs suspended architectural LED luminaire 36 W including PVC three core flexible copper conductor cable from ceiling rose to connector of fittings complete all as specified and directed. Make : Havells/ Philips/ Wipro/ Crompton

Supply and fixing in repairs LED Building light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and as directed. Make : Havells/ Philips/ Wipro/Crompton

Supply and fixing in repairs LED Luminiors 70 watt energy saving, enviourment freiendly and robust IP65 protected LED midbay with PDC housing suitable for ceiling surface/suspended amounted, heavy duty with clamp and fixing arrangement complete all as specified and directed. Make : Havells/ Philips/ Wipro/Crompton

Supply and fixing in repairs energy saving, environment friendly & robust highbay/Medium bay LED IP65 luminaiere with high efficacy of 200 watt capacity of with necessary connection and brackets of suitable complete all as shape specified and directed by Engr-in-Charge. Note:- Fitting to be fitted at height 20 metres. The contractors will provided his own arrangment with safety precautions.

Dismantling carefully disconnecting and bringing down the existing unserviceable flame proof tube light fitting, 1 x 40 / 36 watt / 2 x 40 / 36 W of any type and make from wall/ceilings at any height and carrying out necessary repairs, cleaning of cover and repairs to internal wiring and spares including ballast starter, starter holders etc., at any height and refixing to the position complete all as specified and directed by Engineer-in-Charge. Notes : (i) LED tube rod will be measured and paid seperatly as "supply only"

Dismantling carefully disconnecting and bringing down the existing unserviceable tube light fitting, 1 x 40 / 36 / 28 watt / 2 x 40 / 36 / 28 W of any type and make from wall / ceilings at any height and carrying out necessary repairs, cleaning of cover and repairs to internal wiring and spares including ballast starter, starter holders etc., at any height and refixing to the position all as specified and directed by Engineer-in-Charge. Notes : (i) LED tube rod will be measured and paid seperatly as "supply only"

Supply only LED retrofit tube light crystal glass one side connecion suitable for installation in existing T8 tulight with G13,18watt/20watt lamp complete all as specified and directed. Make : Philips/ Havells/Wipro

Supply only LED retrofit tube light crystal glass double side connecion suitable for installation in existing T8 tulight with G13,18watt/20watt lamp complete all as specified and directed. Make : Philips/ Havells/Wipro

Supply and fixing ,in repairs connecting and testing MCB 10 kA C curve on existing distribution board out going/incoming any type and connecting to existing circuits complete all as specified and as directed of the following capacity :- Make : Legrand/ Havells/ L&T/ C&S a) MCB SP 6 to 32 Amps

b) MCB SPN 16 to32 Amps.

c) MCB SPN 40 to 60 Amps.

d) MCB TPN 32 to 63 Amps.

Supply and fixing in repairs TPN distribution board factory made double door flush type as per IS 8623 made from sheet metal duly powder coated for single phase outgoing and three phase incomer, with 200 Amps rated bus bar, 415 V, 4 way flush with wall complete with all accessories all as directed by Engineer-in-Charge. Make : Legrand/ Havells/ L&T/ C&S

Supply and fixing in repairs SPN distribution board factory made double door flush type all as per IS 8623 made from sheet metal duly powder coated to be fixed flush with wall complete with all accessories all as directed by Engineer-in-Charge for the following ways:- Make : Legrand/ Havells/ L&T/ C&S a) 8 way SPN.

b) 12 way SPN.

Supply and fixing in repairs LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessiories. Make : Havells/ Wipro/ Philips

Taking down carefully ceiling fan / normal / FLP wall mounted fan / FLP pedestal fan / norma/FLP exhaust fan of any sweep /size from location of any height after disconnecting from the live line,transpotation the same from site to workshop for repair including dismantling of the fan blades,motor,brackets for repairs and reassembling it complete after overhaulling oiling including gresing after replacing unserviceable parts and refixing at original location including painting with one coat of synthetic enamel paint of white colour or any approved colour after cleaning the fan surfaces and testing at site all as directedby engr-in-Charge. Notes : (i) Spare parts replaced except minor items will be measured and paid sepaterly as "Supply only". (ii) Painting of ceiling fans /exhaust fans will be measured sepaterly. (iii) Rewinding of ceiling fans/exhaust fans will be measured and paid sepaterly.

Material and labour for rewinding of ceiling fan 1200mm to 1400 mm sweep /wall mounted fans/pedestal fans of any size removed under Sl item No 69.0 above including dismantling the fan motor and removing the burnt out winding, cleaning the starter with CTC soloution to remove the burnt slots.Rewinding the same with super enameled copper wire of suitable gauge and size / number of turns including insulation varnishing and reassembling complete all as specified and directed.

Material and labour for rewinding of exhaust fan 400mm to 450 mm sweep /wall mounted fans/pedestal fans of any size removed under Sl item No 69.0 above including dismantling the fan motor and removing the burnt out winding, cleaning the starter with CTC soloution to remove the burnt slots.Rewinding the same with super enameled copper wire of suitable gauge and size / number of turns including insulation varnishing and reassembling complete all as specified and directed.

Material and labour for rewinding of FLP exhaust fan size 380 to 450 mm sweep /wall mounted fans/pedestal fans of any size removed under Sl item No 69.0 above including dismantling the fan motor and removing the burnt out winding, cleaning the starter with CTC soloution to remove the burnt slots.Rewinding the same with super enameled copper wire of suitable gauge and size / number of turns including insulation varnishing and reassembling complete all as specified and directed.

Material and labour for rewinding of exhaust fan size upto 300 mm sweep /wall mounted fans/pedestal fans of any size removed under Sl item No 69.0 above including dismantling the fan motor and removing the burnt out winding, cleaning the starter with CTC soloution to remove the burnt slots.Rewinding the same with super enameled copper wire of suitable gauge and size / number of turns including insulation varnishing and reassembling complete all as specified and directed.

Supply only following spare part /item of ceiling fan/ exhaust fan / wall mounted fan and pedestal fan of various types complete all as specified and directed :- (a) Flexible twin rwisted copper wire two core of size 23 / 0.0076 mm upto 1.5 mtr length.

(b) Ball bearing suitable for Ceiling fan 1200/1400 mm sweep.

(c) Ball bearing suitable for exhaust fan 400-450 mm sweep.

(d) Ball bearing suitable for exhaust fan upto300mm sweep.

(e) Condensor 2.5 mfd, 230 V, suitable for ceiling fan / wall fan / exhaust fan of any sweep and size

(f) Condensor 4 mfd, 230 V suitable for wall mounting fan / exhaust fan / pedestalfan of any sweep / size.

Material and labour for painting of ceiling fan / exhaust fan and wall mounted fans / exhaust fan / air circulators of any size or sweeps complete including fan blades, down rod, fan motor body after dusting, cleaning and painting with white syenthetic enamel paint by spray paint and pasting soft stickers indicating MES No of 25 mm size each letter with black syenthetic enamel paint complete all as specified and directed by Engr-in-charge.

Material and labour painting of FLP exhaust fan and wall mounted fans of any size or sweeps complete including fan blades, down rod, fan motor body after dusting, cleaning and painting with white syenthetic enamel paint by spray paint and pasting soft stickers indicating MES No of 25 mm size each letter with black syenthetic enamel paint complete all as specified and directed by Engr-in-charge.

Material and labour in repairs earthing with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised strip 32mm x 6mm by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No. 03 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab GI funnel with GI watering pipe 20mm dia med gde, wire mesh, protection pipe 40mm dia GI pipe light gde for earth lead upto 7.50 m long complete all as specified and directed by Engineer-in-Charge. Note : Test report shall be prepared and submitted by the contractor in triplicate duly obtaining signatures of MES JE / AGE & PMG / user. Test results are to be written in letters of 20mm height in white colour on black paint back ground.

Material and labour in repairs earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab GI funnel with GI watering pipe 20mm dia med gde, wire mesh, protection pipe 20 mm dia GI pipe light grade for earth lead upto 7.50 m long complete all as specified and directed by Engineer-in-Charge. Note : (i) Epoxy base insulator and PCC block only will be measured and paid separately. (ii) Unit rate quoted is deemed to be inclusive cost of one lead joint and 2 Nos GI nuts, bolts washers, screws and necessary T&P and machining work reuired at site.

Taking down / dismantling existing perished aluminium strip of size 25mm x 3 mm from any height of roof top / on walls of conventional type lightening protection network system complete all as specified and as directed.

Re-fixing old serviceable aluminium strip of size 25mm x 3 mm obtained from sl item No 77.0 herein before on existing PCC block at any height on roof top, on existing insulators any type on walls including jointing the system of conventional type lightening protection network and making good the disturbed surface of walls / roof top match with existing surface complete all as specified and as directed.

Material and labour for aluminium strip in replacement of size 25x3mm fixed on PCC block with epoxy based insulator of 35mm size at distance / interval not more than 1.0 m for down conductor air terminal network including drilling two Nos holes at each joint, one set of lead washers between strips, two sets GI nut and bolt, gutties, screws etc. Note for : (i) Epoxy base insulator and PCC block only will be measured and paid separately under relevant items. (ii) Unit rate quoted is deemed to be inclusive cost of one lead joint and 2 Nos GI nuts, bolts washers, screws and necessary T&P and machining work reuired at site.

Taking down / dismantling existing perished GI strip of size 32 x 6 mm from on walls / buried in to ground of conventional type lightening protection network system complete all as specified and as directed.

Fixing only old serviceable GI strip of size 32mm x 6 mm as obtained from as per sl item No 80.0 herein before on existing walls / buried under ground, on existing insulators any type including jointing the system of conventional type lightening the system of conventional type lightening protection network and making good the disturbed surface of walls complete all as specified and as directed.

Material and labour for galvanised iron strip in replacement of size 32 x 6 mm burried in ground or fixed on wall with suitable 35 mm size epoxy base insulator fixed on wall / floors fixed at distance / interval not more than 1.0 m and connected to test point including bending, jointing at test points with 2 Nos GI nuts, bolts, with lead washers, jointing strips at all joints as directed by Engr-in-Charge.

Supply and fixing of epoxy base insulator of suitable size, 35mm height fixed on PCC blocks/ wall or MS angle/ Pipe or on traverse etc. complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC block of size 150mm x 150mm x 150mm in PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate including necessary form / mould for fair and even surfaces, air termination rod / GI strip etc, complete all as specified and directed.

Material and labour for dismentling of existing inspection box of any material shape and size including supply and fixing of new inspection box / cover box of size 250mm x 150mm x 100mm made out of 2 mm thick MS sheet with hinged front opening cover including provision of fixing 2 Nos epoxy insulators and insulating PVC sheathed for incoming and outgoing aluminium / GI strips for proper insulation etc compelte all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of air termination single pointed aluminium rod of 12 mm dia 300 mm long fixed to aluminium strip 25mm x 3 mm including drilling holes, nuts, bolts washers for resting/ supporting of air terminals etc., complete all as specified and directed.

Material and labour for dismenltling and taking down from roof / poles air termiantion single pointed rod 12 mm dia 300 mm /1 RM long and keeping in safe custody including making good the disturbed surfaces after resuse at specfied location after replacement of PCC block, insulator, strip and connect to aluminium strip including 2 No drilling holes, nuts, bolts washers complete all as specified and directed by Engineer-in-Charge. Note :- Cost necessiated for temperory support structure required for working and safety deemed to be included in unit quoted rate.

Taking down old unseviceable FLP DB removing main incomer and outgoing cable without any damage complete all as specified and directed.

Supply and fixing Flame prrof distribution board LM6 enlouser including stainless steel hinges incoming and outgoing termination complete ready to use comprising of :- Make : Sudhir/ Shyaam/ Crompton/Baliga/TriFLP a) Incomer MCCB 100 Amps 4pole 18 ka- 1 No, b) Outgoing TPN MCB 63 Amps - 4 Nos, c) single pole mcb 20 Amps - 8 Nos.

Supply and fixing FLP Exahust Fan Heavy duty single phase 380 mm Sweep complete all as specified and directed. Make : Sudhir/ Shyaam/ Crompton

Dismantling carefully, disconnecting and bringing down the existing flameproof DB of any size/capacity and carrying out necessary repairs and providing internal wiring with suitable copper wire,lugs and connectors etc. painting and refixing in position/same location complete all as specified and directed by Enge-in-Charge

Dismantling carefully,disconnecting and bringing down the existing flameproof switch socket of 16-25 Amp. Single phase of any make and carrying out necessary repairs and refixing in position complete all as specified and directed by Engr-in-Charge.

Dismantling carefully,disconnecting and bringing down the existing flameproof switch socket of 16-25 Amp. Three phase of any make and carrying out necessary repairs and refixing in position complete all as specified and directed by Engr-in-Charge.

Dismantling carefully,disconnecting and bringing down the existing flameproof switch socket of 32-63 Amp. Three phase of any make and carrying out necessary repairs and refixing in position complete all as specified and directed by Engr-in-Charge.

Material and labour for Flame proof Sub main Wiring with single core,multistranded PVC FRLS insulated unsheathed cable 1100 volts grade with copper conductor, drawn in and including steel rigid conduit, conduit fittings and accessories such as bend,elbow,junction box etcon surface wall/roof/floor with one run of suitable size PVC FRLS insulated unsheathed copper conductor cable as earth continuity conductor and connecting too common earth dolly complete all as specified and directed for following size :- Note:- 4 Runs main wire along with earth wire and one run of steel conduit pipe shall be measured as one unit and FLP junction box and elbow will be measured and paid for seperately. a) 4 x 6 sqmm + 1 x 6 sqmm earth wire (32MM/25mm suitable steel conduit)

b) 4 x 4 sqmm + 1 x 4 sqmm earth wire(25MM steel conduit)

c) 4 x 2.5 sqmm + 1 x 2.5 sqmm earth wire (20MM steel conduit)

d) 2 x 2.5 sqmm + 1 x 1.5sqmm earth wire ( 20MM steel conduit)

e) 2 x 4 sqmm + 1 x 2.5 sqmm earth wire (20MM steel conduit)

Baljeet Singh Choudhari

GRAND SERVICES

R. K. Industrial Fabricators

Borole Electricals

Star Electrical

MAYUR ELECTRIC SERVICES

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd

PAMS ENTERPRISES