Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC | L1 | Accepted-AOC The Bider has rebate 1 percent on overall tender amount which is accepted by tender committee | |
| 2 | L2₹15.4 L+₹34,690 (2.31%)Rejected-Finance | L2 | Rejected-Finance As Rank in Financial Bids is L2 | |
| 3 | L3₹15.4 L+₹39,610 (2.64%)Rejected-Finance | L3 | Rejected-Finance As Rank in Financial Bids is L3 |
Tender Value
₹15.3 L
EMD Value
₹31,000
Closing Date
26 May 2025, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Officer MC Chamba
Executive Officer, Municipal Council Chamba Distt Chamba H.P 176310
Providing and Fixing Ornamental Magestic Pole Light and Music System in Chowgan No 1 Tehsil and District Chamba
2025_UDDHP_104782_1
No.MCC2025-E Tendering 362-67 Dated 01 May, 2025
Open Tender
Miscellaneous Works
Item Rate
30 days
MC Chamba
Valid Registration of Contractor/ Firm
PAN and GST No
EPF Registration No.
Cost of Tender Form and EMD deposit Receipt
Aadhar Card No
Latest ITR Filed
Authorization and Work done Certificate for specified job
Financial Bid
8 documents required · 8 mandatory
₹1,000
EO MC Chamba
₹31,000
19 Jun 2025
5 May 2025
27 May 2025
5 May 2025
26 May 2025
5 May 2025
Amount
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary Rock
Centering and shuttering including strutting, propping etc. and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) :
Providing and laying of one no. following size aluminium conductor. PVC insulated and Pvc sheated, armourd /XLPE,power cable.working voltage 1100 volts grade direct in ground: to be laid 1 meter below ground level including excavation,sand cushioning ,protective covering and refilling the trench etc as required. cable 6.00 sqmm weather proof service wire aluminium conductor along with 8 swg G.I wire as required. 4.i) 6 Sqmm twin core
4.ii) 10 Sqmm twin core
Supply& laying 2x2.5 sqmm copper wire in the existing pole as required
Providing & fixing 5mtr. Decorative Pole made out of G.I. tubes having 195mmx1000mm dia at bottom and 114mmx4000mm dia at Top with decorative cast A service window provided in the bottom portion of the Pole comprising heavy duty 4 way connector & suitable rating MCB on a bakelite sheet. Complete pole is painted /finished with Poly-Urethane/Polyester paint. The pole is suitable for mounting with 4 nos. Anchor bolts & complete with wiring of Pole. 5mtr. LuxMax MAJESTIC Pole (Cast Alum.) alum. embellishment. The decorative cast aluminum embellishments are fixed at bottom & middle and cast aluminium rings are fixed to the centre of column by grub screw as shown in drawing. Twin Arm Bracket - (LuxMax-BKT-203) Decorative ornamental cast aluminium Twin Arms Bracket suitable for two nos. hanging light fittings. The brackets are primer coated and painted with polyurethane paint. IRIS-CR LED hanging light fixture made out of spun alum. housing with crown. The Power LED’s are mounted on metal clad PCB’s then mounted on extruded alum. Heat Sink and fitted with LED drivers. A UV stabilized PC/PMMA diffuser is provided for glare free Lighting with high Visual comfort. 5mtr. LuxMax MAJESTIC Pole (Cast Alum.) with Double Arm Bracket - (LuxMax-BKT-203)
Supply, fabirication, installation, testing, commissioning and electrically connected Factory (CPRI approved) made, LT panel Board of approved size as recommended by IS & CPRI norms,indoor type,Floor Mounted 1000 Volt,made out off CRCA sheet 2.0mm thick for load bearing and and 1.6mm IP-54 (certificate not older than 2 year) protection with base frame of 5mm thick chanel for frame,for 415 volts,3 phase,4 wire AC supply,complete all as specified including provision of following accessary/components housed in -: (i) 100 Amps rated copper bus bar with colour code TPN mounted on epoxy insulator : 01 set (set for 04 bus bar. (ii) Digital Multification metre 0.250Amps with Suitable CT's-01 set. (iii) LED indicating lamp (set of three)- 01 Set. (iv) Internal wiring with 1100 volt grade unsheahed PVC insuladed copper conductor of suitable size cable as per colour coding or suitable size of bus bar for all connections with suitable iugs as required and as per specified. (v) Earthing teminals and cable glands. (vi) Danger notice plate for LT with conventional skull and bones duly riveted/pasted to the panel board door.(PRI approved/tested & confirm to IS: 64139. 1. Make:- EVA/Power system control Make. 2. The Panel shall include the following Switchgear & accessories; as per the Make of , C&S etc. 3.Incoming-: (1) MCCB 63 Amps,4Pole,Adjustable thermal and fixed magnetic setting repture capacity 35 ka-1No. (2) Shunt coil & EXT. ROH-1No. (3) SPD Type 1+2 3p+N 50ka-1No.
Providing and fixing outdoor pole speaker for Ahuja make SP-6305TD with multicolour light frequency response 160 hz to 16000Hz with 88 db of approved brand inclusing wiring and amplifier. Etc as required complete in all respects.
Providing & fixing Ahuja make 250 watt mixture amplifier with USB, SSA-250 DP complete in all respects
Supply and laying of water proof 2 core cable for speaker including connection etc.
Providing and laying 25 mm dia PVC pipe heavy duty complete in all respects
Vishal Suri (BID ID -519118)
sanjeev kumar kalia (BID ID -517765)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .