REPAIR TO VARIOUS WOODEN FURNITURE AT ABOHAR AND FAZILKA MIL STN

Amount

TABLE 900 X 600mm with and without Drawer :Removing the exising UNSV top of table 3' X2' with / without drawer and S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg.

Removing of UNSV legs of table 3' X 2' with and without drawer and S&F of new legs as existing of Ist class hard wood .

Removing of UNSV long rails of table 3' X 2' with and without drawer and S&F of new long rails as existing of Ist class hard wood

Removing of UNSV side rails of table 3' X 2" with/without drawer S&F of new rail as existing of Ist class hard wood

Removing of UNSV drawer of table 3' X 2' with drawer and S &F new drawer as existing alongwith chromium plated knobs all as per drg.

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces.

TABLE CENTRE : Removing the existing u/s top of table centre & S&F of new top of size 900x450mm made out of prelaminated (one side) particle board 18/19mm thick including 4mm thick TW beading around.

Removing of old u/s legs of table centre S&F of new legs as existing of Ist class hard wood

Removing of u/s long rail of table centre S&F of new rails as existing of Ist class hard wood

Removing of old u/s short rail of table centre and S&F new short rail made out of 1st class hard wood as shown in the drg

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain glossy finish on all the exposed surfaces.

TABLE BED SIDE (MAP) :Removing the existing u/s top of table bed side S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg.

Removing of u/s side and replacing the same with one side teak faced prelaminated particle board

Removing the u/s drawer and S&F new drawer made out of prelaminated partcile board and 12mm thick commercial plywood as specified in drg .

Removing the u/s back plywood , S&F new 6mm thick BWR grade plywood commercial as existing.

Removing the u/s legs and S&F new legs made out of ms square 18mm pipe with appropriate size screws and matching black colour with other legs.

CHAIR DINING : Removing the u/s front legs , S&F new front leg as existing of Ist class hard wood

All as per item No 17 but Rear legs

All as per item No 17 but Front rai

All as per item No 17 but Rear rail

All as per item No 17 but Side rail

All as per item No 17 but Back Wooden

All as per item No 17 but Stiffner

Removing of existing cane cleaning of cane holes and recanning with 2 mm wide new plastic cane for seat and 3.5 mm wide cane for borders of chair all as specified and shown on drg and as directed by Engr-in-charge. (For chair 0.40x0.39 = 0.156 Sqm)

Removing old u/s pvc seat from existing chair dining and S&F new PVC seat single piece 3mm thick weight not less than 0.39 Kgs with holes having 4 x 10mm thick ribs moulded all as specified in drg and as directed.

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces.

CHAIR WRITING : Removing the u/s front legs , S&F new front leg as existing of Ist class hard wood

All as per item No 27 but Rear legs

All as per item No 27 but Arms

All as per item No 27 but Front rail

All as per item No 27 but Rear rail

All as per item No 27 but Side Rail

All as per item No 27 but Stiffner

All as per item No 27 but Teak wood back

Removing of existing cane cleaning of cane holes and recanning with 2 mm wide new plastic cane for seat and 3.5 mm wide cane for borders of chair all as specified and shown on drg and as directed by Engr-in-charge.

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces.

CHAIR EASY : Removing the u/s front legs , S&F new front leg as existing of Ist class hard wood

All as per item No 37 but Arms

All as per item No 37 but Front rail

All as per item No 37 but Rear rail

All as per item No 37 but Side rail

All as per item No 37 but Top/Bottom rail Back frame

All as per item No 37 but Side rail back frame

Removing of existing cane cleaning of cane holes and recanning with 2 mm wide new plastic cane for seat 3.5 mm wide cane for borders of chair all as specified and shown on drg and as directed by Engr-in-charge. (For chair Seat 0.51x0.45=0.2295 Sqm) (Back 0.43x0.34=0.1462 Sqm) Total 0.3757 Sqm

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces.

PEG TABLE : Removing the existing u/s top of peg table , S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg.

Removing the u/s leg , S&F new leg as existing of Ist class hard wood

All as per item No 47 but long rail

All as per item No 47 but short rail

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces.

TEAPOY : Removing the existing u/s top of Teapoy S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg.

Removing the u/s leg , S&F new leg as existing of Ist class hard wood

All as per item No 52 but stiffner

All as per item No 52 but long rails

All as per item No 52 but short rails

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces.

SIDE BOARD : Removing of u/s back , S&F new back of side board with 6mm thick BWR grade commercial ply wood as existing and as per drg.

Removing the existing u/s shutter, S&F new shutter as existing made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The shutter shall be fixed with 4mm thick TW edging all round as per drg and fixed with aluminium anodised knob with ball spring catch.

Removing the u/s leg , S&F new leg as existing of Ist class hard wood

Removing of u/s drawers, S&F new drawers made out of 12mm commercial plywood and fixed with aluminium anodised knob all as per existing and shown on drg.

Removing of U/S shelves from side board and S&F new shelves as per existing shape & size made out of 18mm thick particle board one side teak faced.

Removing of U/S side of side board and S&F new side made out of 18 mm thick prelaminated particle board as per existing shape & size

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces including inside of shutter

TABLE WRITING: Removing the exising UNSV top of table writing and S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg.

Removing unsv shutter and S&F new shutter made out of 18mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side.Shutter shall be fixed with 4mm thick TW edging all round and one aluminium anodised knob all as shown on drg.

Removing unsv legs and S&F legs as existing of Ist class hard wood

Removing unsv bottom stiffner S&F new stiffner of bottom as existing of Ist class hard wood.

Removing unsv drawer and S&F new drawer of table writing as existing and fixed with aluminium anodised knob. Rest all as per existing and as specified in drg.

Removing of U/S back ply from table writing and S&F new back ply of 6mm thick commercial plywood as per existing shape & size

Removing unsv bottom of box and S&F new botom of table writing with 18mm prelaminated particle board as per existing shape & size and as specified in drg.

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces including inside of shutter

TABLE DRESSING LADIES :Removing unsv back ply of mirror and S&F new 6mm commercial plywood to back of mirror as existing and as per drg

Removing unsv wooden member and S&F new TW member for holding mirror alongwith mirror frame alround as existing.

Removing unsv top of box and S&F new top made out of 19mm thick Prelaminated particle board one side teak shade to the top of table dressing ladies all as per drg with 4mm thick TW edging.

Removing unsv alluminium channel and S&F new 12x22mm Aluminium channel for sliding glass all as per drg

Removing unsv leg and S&F new leg as existing of Ist class hard wood

Removing unsv mirror and S&F new looking mirror of 5mm thick all as per drg and as existing

Removing unsv knob and S&F new aluminium anodised knob to drawer

Removing unsv drawer and S&F new drawer all as per existing size made out of 12mm thick commercial plywood.

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces

TABLE DRESSING GENTS WITH MIRROR :Removing unsv back ply of mirror and S&F new 6mm thick ply wood to back of mirror as per existing shape & size

Removing unsv wooden member and S&F new TW member for holding of mirror alongwith mirror frame as per Drg

Removing unsv mirror and S&F new looking mirror of 5mm thick as per existing shape & size

Removing unsv knobs and S&F new aluminium anodised knob to drawer

Removing unsv drawer and S&F new drawer all as per existing size made out of 12mm thick commercial plywood.

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces

TABLE DINING 6 PERS : Removing the existing u/s top of Table and S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg.

Removing the unsv legs and S&F new legs as existing of Ist class hard wood

Removing the existing u/s top rail and S&F new rail as existing of Ist class hard wood

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces

TABLE DINING 8 PERS : Removing the existing u/s top of Table and S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg.

Removing the unsv legs and S&F new legs as existing of Ist class hard wood

Removing the existing u/s top rail and S&F new rail as existing of Ist class hard wood

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces

BED PLY WOOD TOP :Removing unsv plywood and beading of head board and S&F new teak veneered decorative plywood 4mm thick to both sides of the head board including fixing 6mm thick teak wood beading all round and as exising and as specified in drg .

Removing unsv plywood and beading of foot board and S&F new teak veneered decorative plywood 4mm thick to both sides of the foot board including fixing 6mm thick teak wood beading all round and as exising and as specified in drg .

Removing of unsv long rail & S&F new long rail made out of well seasoned teak wood as per existing shape & size

Removing of unsv support short rail and S&F new short suport rail made out of TW as existing and as per drg.

Removing of unsv legs and S&F new leg made out of well seasoned teak wood as per existing shape & size and as shown on drg.

Removing unsv ply wood top and S&F new ply wood 12mm thick commercial BWR grade with appropriate size MS screws 08 Nos as exising and as specified in drg

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces

SOFA SET 4 / 5 SEATER : S&F 32 density 530x560x100mm cool foam cushion covered with cloth tapestry superior quality , colour, pattern and quality as approved by GE/Engr-in-Charge. Make of cushion - SAMRAT/Sleepwell/Kurlon. Each cushion cover shall be provided with one side openable zip.

S&F cushion cover only of size 530x560x100mm cloth tapestry superior quality , colour, pattern and quality as approved by GE/Engr-in-Charge. Each cushion cover shall be provided with one side openable zip.

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces to sofa set 5 seater .

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces to sofa set 4 seater

SHIVANI ENTERPRISES

SUDESH ENTREPRISES