Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC BLOCK NO 2 FLAT NO 17 FIRST FLOOR KENDRIYA VIHAR PARUTHIPATTU AVADI CHENNAI 600 071 | CHENNAI | CHENNAI | TAMIL NADU | 600071 | L1 | Accepted-AOC Being the lowest tenderer and fulfilling all the criteria | |
| 2 | L2₹16.3 L+₹4.5 L (38.1%)Rejected-Finance NO 1 4 56 Y SRI BHARATHI NAGAR OPP PARVATHI THEATER CUMBUM ROAD THENKARAI PERIYAKULAM THENI DT 625 601 | PERIYAKULAM | THENI | TAMIL NADU | 625601 | L2 | Rejected-Finance Not being the lowest tenderer | |
| 3 | L3₹16.4 L+₹4.6 L (38.6%)Rejected-Finance | L3 | Rejected-Finance Not being the lowest tenderer | |
| 4 | L4₹18.8 L+₹7.0 L (59.0%)Rejected-Finance 131 SANGAM NAGAR OPP NATIONAL SCHOOL SANGHVI PUNE 411027 | PUNE | MAHARASHTRA | 411027 | L4 | Rejected-Finance Not being the lowest tenderer | |
| 5 | L5₹22.9 L+₹11.1 L (94.1%)Rejected-Finance 03 PATEL STREET GANDHI NAGAR AVADI TIRUVALLUR TAMIL NADU 600054 | THIRUVALLUR | TAMIL NADU | 600054 | L5 | Rejected-Finance Not being the lowest tenderer |
Tender Value
Refer Docs
EMD Value
₹45,000
Closing Date
15 Jul 2021, 6:00 pmClosed
GE Chennai
Fort Saint George, Chennai
REPAIRS TO WOODEN FURNITURE UNDER GE CHENNAI
2021_MES_452428_1
8501/E8
Open Tender
Miscellaneous Works
Item Rate
183 days
Fort Saint George
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Chennai
₹45,000
Yes
18 Sept 2021
17 Jun 2021
21 Jul 2021
17 Jun 2021
15 Jul 2021
1 Jul 2021
Amount
BIN SOILED LINEN LARGE (FD-244) Removing the following unserviceable parts of Bin Soiled Linen and supply and fix new parts all as specified and directed:-
Top of 6mm thick plywood one side teak veneered of size 900mm x 450mm with teak wood edging 4mm thick alround.
Front side 6mm thick commercial plywood of size 800mm x 240mm.
Back side of 6mm thick commercial plywood of size 800mm x 240mm.
Second class hardwood legs of size 45mm x 25mm/ 45mm x 45mm alongwith frame of size 740mm x 390mm and nylon buffers of size 40 x 20mm.
Stainless steel butt hinges of size 75mm.
M&L preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.
BOOK SHELF OPEN SMALL (DB-4121) Removing the following unserviceable parts of book shelf open small and supply and fix new parts all as specified, shown in drawing and as directed:-
Bottom made out of 18/ 19mm thick commercial plywood.
Shelf made out of 15mm thick teak wood duly fixed with steel lugs/ clamps wherever necessary.
Top made out of 20mm thick teak wood duly fixed with steel lugs/ clamps wherever necessary.
M&L preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.
CHAIR DINING (FD- 279/ FD-228) Removing the following unserviceable parts of chair Dining and supply and fix new parts all as shown in drawing and as specified and as directed:-
Teak wood Rear leg of size 55mm x 30mm x 890mm made to shape including nylon buffers.
Teak wood Front leg of size 55mm x 30mm x 440mm made to shape including nylon buffers.
Teak wood front rail made out of 30mm x 65mm made to shape with holes at every cm in straight line.
Teak wood Side rail made out of 30mm x 65mm made to shape with holes at every cm in straight line.
Teak wood Rear rail made out of 30mm x 65mm made to shape with holes at every cm in straight line.
Teak wood Stiffeners of size 20mm x 25mm made to shape.
Teak wood Top back rest made to shape.
M&L preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.
CHAIR EASY (FD- 229) Removing the following unserviceable parts of Chair Easy and supply and fix new parts all as specified and as directed:-
Teak wood Rear leg of size 55mm x 25mm x 490mm made to shape including nylon buffers.
Teak wood Front leg of size 55mm x 25mm x 490mm made to shape including nylon buffers.
Teak wood front rail made out of 50mm x 25mm made to shape with holes at every cm in straight line.
Teak wood Side rail made out of 50mm x 25mm made to shape with holes at every cm in straight line.
Teak wood Rear rail made out of 50mm x 25mm made to shape with holes at every cm in straight line.
Teak wood arm rest out of 65mm x 25mm made to shape.
M&L preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.
CHAIR WRITING (FD-250/ 280) Removing the following existing unserviceable parts of Chair Writing and supply and fix new parts all as specified, shown on drawings and as directed:-
Teak wood Rear leg of size 55mm x 30mm x 890mm made to shape including nylon buffers.
Teak wood Front leg of size 55mm x 30mm x 460mm made to shape including nylon buffers.
Teak wood front rail made out of 65mm x 30mm made to shape with holes at every cm in straight line.
Teak wood Side rail made out of 65mm x 30mm made to shape with holes at every cm in straight line.
Teak wood Rear rail made out of 65mm x 30mm made to shape with holes at every cm in straight line.
Teak wood Arm rest made to shape.
Teak wood Back rest of size made to shape.
Teak wood Stiffeners.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.
PEG TABLE (FD-236 / 277) Removing the following unserviceable parts of Peg Table and supply and fix new parts all as specified, shown on drawings and as directed.
Table top of size 300mm x 450mm made out of pre-laminated particle board 18mm thick, exterior grade with natural teak veneered shade on one side and other side balancing white of approved quality duly provided with 4mm thick teak wood edging alround complete all as specified and directed:-
Teak wood long rail made to shape.
Teak wood short rail made to shape.
Teak wood legs of peg table made to shape including nylon buffers.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.
TABLE COMPUTER (FD/E6/MAP/03) Removing the following unserviceable parts of TABLE COMPUTER and supply and fix new parts all as specified, shown on drawing and as directed:-
Top made of 18mm/ 19mm thick pre laminated particle board with 4mm thick teak wood beading.
Bottom shelf made of 18/ 19mm thick pre laminated particle board with 4mm thick teak wood beading.
Key board tray of size 450mm x 480mm made of 18mm/ 19mm thick pre-laminated particle board with 4mm thick teak wood beading.
Pull out tray (Mouse tray) made of 18/ 19mm thick pre laminated particle board with 4mm thick teak wood beading.
Drawer 75mm deep made of 18/ 19mm thick pre-laminated particle board with knob.
Telescopic channel for key board tray, pull out tray and drawer of suitable size.
Legs with nylon buffers of suitable size.
Rectangular PVC cover size 25mm x 50mm made to shape.
TABLE DRESSING LADIES (FD-251) Removing the following unserviceable parts of table dressing ladies and supply and fix new parts all as specified, shown on drawing and directed:-
5.5mm thick electro copper plated mirror of size 1250mm x 400mm.
Sliding glass of size 280mm x 260mm -2 No. duly grooved and fixed on aluminum channel of suitable size. Note: 2 Nos. of glass pane will be measured as a single unit.
Drawer made out of 18mm/ 19mm pre-laminated particle board one side natural teak shade & other side white with 12mm thick teak wood plank on sides and rear with 6mm thick plywood bottom including provision of chromium plated knob complete.
Bottom made out of 18mm/ 19mm thick particle board both side commercial.
Bottom frame made out of teak wood stiffener of size 40mm x 25mm alround alongwith 4 No. legs made out 45mm x 45mm x 150mm long with the bottom of 25mm x 25mm x 150mm with overall size 700mm x 200mm complete.
M&L for preparing the old surface by scrapping and smoothening with sand paper and giving an even finish to polish and polishing by applying two or more coats of French polish to give glossy appearance complete.
TABLE DRESSING GENTS (FD-230) Removing the following unserviceable parts of table dressing gents and supply and fix new parts all as shown on drawing and as specified and directed:-
Top made out of pre-laminated particle board of natural teak shade 12mm thick of size 910mm x 310mm provided with 3mm thick teak wood edging complete.
Teak wood back plank of size 900mm x 300mm, 12mm thick as specified, shown in drg and as directed.
Drawer of size 300mm x 270mm made out of 12mm pre-laminated particle board natural teak shade & other side white on front side with 12mm thick teak wood plank on sides and rear with 6mm thick plywood bottom including provision of chromium plated knob complete.
Mirror 5.5mm thick of size 380mm x 760mm.
M&L for preparing the old surface by scrapping and smoothening with sand paper and giving an even finish to polish and polishing by applying two or more coats of French polish to give glossy appearance complete.
SIDE BOARD (FD-241) Removing the following unserviceable parts of Side Board and supply and fix new parts all as specified, shown in drawing and as directed:-
Door shutter in two parts of size 655mm x 835mm made out of pre-laminated particle board 18mm thick, exterior grade with natural teak shade on one side and other side white of approved quality duly fitted with Piano hinges, knobs 2 No., lock 01 No. and providing border with 4mm thick first class teak wood beading all around complete. Note:- Double leaf shutter will be measured as one unit.
Side portion of pre-laminated particle board 18mm thick exterior grade with natural teak shade on one side and white shade of approved quality on the other side.
Back side of 6mm commercial plywood all as shown in the drawing and as directed.
Bottom Frame made out of first class teak wood fitted with stiffeners and legs 4 Nos complete all as specified and directed.
Drawer duly fitted with chromium plated knob complete.
Bottom and top made out of 18mm thick particle board both side commercial.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed:-
STOOL DRESSING (FD-252/ FD-282) Removing the following unserviceable parts of Stool dressing and supply and fix new parts all as shown in drawing and as specified and as directed:-
Teak wood long rail made to shape with holes at every cm in straight line.
Teak wood side rail made to shape with holes at every cm in straight line.
Teak wood legs with nylon buffers.
Teak wood stiffener.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.
TABLE BED SIDE (FD-276) Removing the following unserviceable parts of Table Bed Side and supply and fix new parts all as shown in drawings and as specified and as directed:-
Top made out of 18mm thick pre-laminated particle board with natural teak veneers on one side and other side balancing white duly provided with 4mm thick teak wood edging complete.
Side made out of 18mm thick pre-laminated particle Board with natural Teak Shade on one side and balancing white on the other side duly provided with 4mm thick teak wood edging complete.
Back made out of 6mm thick commercial.
Shelf made out of 12mm thick pre-laminated particle board of size 450mm x 230mm with natural teak shade on one side and balancing white on the other side duly provided with 4mm thick teak wood edging complete.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.
TABLE CENTRE (FD-235/ FD-274) Removing the following unserviceable parts of table centre and supply and fix new parts all as specified, shown in drawings and as directed:-
Top made out of 18mm thick pre-laminated particle board with natural teak veneer on one side and white shade on the other side duly provided with 4mm thick teak wood edging alround complete.
Teak wood legs duly grooved 5mm x 5mm provide MS clamp and nylon buffers of suitable sizes complete all as specified and directed.
Teak wood long rail of first class teak wood.
Stiffener made out of first class teak wood.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance complete all as specified and directed.
TABLE WRITING (FD-249/ FD-275) Removing the following unserviceable parts and supply and fix new parts all as shown in drawings and as specified and as directed:-
Top made out of 18mm thick pre-laminated particle board of size 1145mm x 600mm, with natural teak veneer on one side and white shade on the other dull provided with teak wood edging of 4mm thick alround complete all as specified and directed.
Drawer with sides made of 6mm thick plywood and bottom of 12mm thick teak wood plank including provision of one No. chromium plated knob complete.
Bottom shutter made out of 18mm pre-laminated particle board with 4mm thick teak wood edging alround including provision of one No. chromium plated knob/ handle complete all as specified and directed.
Stiffeners made out of First class teak wood.
Legs made out of first class teak wood duly grooved 5mm x 5mm and provide with MS clamp and nylon buffers of suitable sizes as approved complete.
Back of 6mm thick commercial ply.
Side made out of 18mm thick plywood one side teak veneered and other side commercial duly provided with 4mm thick teak wood beading alround complete.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.
TABLE WITH DRAWER & TABLE WITHOUT DRAWER (900MM X 600MM X 760MM) FD-231/ FD-284) Removing the following unserviceable parts and supply and fix new parts all as specified, shown in drawings and as directed:-
Top made out of 18mm thick pre-laminated particle board of size 900mm x 600mm with one side natural teak shade and other side balancing white.
Teak wood legs provide with MS clamp and nylon buffers of suitable size complete.
Teak wood long rail.
Teak wood short rail.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance all as directed.
TABLE DINING 6/8 PERSONS (1800MM X 900MM X 760MM/ 1500MM X 900MM X 760MM) FD-239/ FD-273) Removing the following unserviceable parts and supply and fix new parts all as specified, shown in drawings and as directed:-
Top made out of 18mm thick pre-laminated particle board with natural teak veneer on one side and balancing white on the other side measuring 1800mm x 900mm duly provided with 4mm thick teak wood edging alround complete.
Top made out of 18mm thick pre-laminated particle board with natural teak veneer on one side and balancing white on the other side measuring 1500mm x 900mm duly provided with 4mm thick teak wood edging alround complete.
Teak wood legs of size 75mm x 40mm including 4 Nos MS clamp and nylon buffers of suitable size complete.
Teak wood long rail of size 100mm x 25mm for table dining 8 persons.
Teak wood long rail of size 100mm x 25mm for table dining 6 persons.
Teak wood side rail of size 100mm x 25mm for table dining 8 persons/ 6 persons.
M&L for preparing the old surface of table dining 6 persons by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance complete all as directed.
M&L for preparing the old surface of table dining 8 persons by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance complete all as directed.
TABLE (900MM X 900MM X 760MM) FD-291/ FD-382) Removing the following unserviceable parts of Table 900mm x 900mm x 760mm and supply and fix new parts all as specified, shown in drawings and as directed:-
Top made out of 18mm thick pre-laminated particle board with natural teak veneer on one side and white shade on the other side measuring 900mm x 900mm provided with 4mm thick teak wood edging alround complete all as directed.
Teak wood legs of size 55mm x 35mm duly provide with MS clamp and nylon buffers of suitable size complete.
Teak wood top rails of size 25mm x 75mm.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance complete all as directed.
TEAPOY (FD-232 / FD-278) Removing the following unserviceable parts of Teapoy and supply and fix new parts all as specified, shown on drawing and as directed:-
Top made out of 18mm thick pre-laminated particle board with natural teak veneer on one side and white shade on the other side measuring 600mm x 450mm provided with 4mm thick teak wood edging alround complete.
Teak wood long rail of size 50mm x 20mm.
Teak wood short rail of size 50mm x 20mm.
Teak wood stiffener of size 50mm x 20mm.
Teak wood legs of size 60mm x 30mm duly provide MS clamp and nylon buffers of suitable size as approved complete.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance complete all as directed.
HAT STAND WITH MIRROR (FD-233) Removing the following unserviceable parts of Hat stand and supply and fix new parts all as specified, shown on drawing and as directed:-
Supply and fix 5.5mm thick electro copper plated mirror of size 440mm x 300mm.
Copper oxidised steel pegs of size 120mm x 75mm.
Supply and fix key plate with screw for wall mounting of 25mm x 40mm.
Teak wood edging of size 6mm x 35mm alround the plywood.
M&L for preparing the old surface by scrapping and smoothening with sand paper and giving an even finish to polish and polishing by applying two or more coats of French polish to give glossy appearance complete.
TROLLEY FOR TV (FD/E6/MAP/04) Removing the following unserviceable parts of TV trolley and supply and fix new parts duly French polished complete all as specified, shown on drawing and as directed:-
Top made out of 18mm thick pre-laminated particle board DSL, Nina teak shade exterior grade with 1mm thick PVC edge banding alround complete.
Pull out Tray made of 18mm thick pre-laminated particle board DSL, Nina Teak shade, exterior grade with 1mm PV edge banding all around the tray on telescopic channel on screws.
Pull out drawer made of 12mm thick pre-laminated particle board DSL, Nina Teak shade, exterior grade with 1mm PVC edge banding all around the tray on telescopic channel on screw with brass handle 75mm long.
Openable glass shutter 5.5mm thick with glass hinges, magnetic catcher and brass handle 75mm.
54mm dia swivel type caster wheel.
PRIYADARSHINI CONSTRUCTIONS
BALAJISTEELINDUSTRIES
LEO ENTERPRISES
SIVA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .