REPLACEMENT OF OLD PCC STREET LIGHT POLE INTO GI OCTAGONAL POLE STEEL TABULAR DECORATIVE POLE WITH CONNECTED WORKS AT BAIRAGARH UNDER GE BHOPAL

Dismantiling and removing of existing cemented (PCC) Poles including coping and GI bracket (of any size or type) carefully without making any damage to existing system from site and leveling,matching with existing surface ground level for taking credit complete all as specified and as directed.

Supply and erection of decorative Hot dip galvanized tapered octagonal pole of height 9.0 mtrs in single or double section having top dia 70mm and bottom dia 155mm made up of 3mm thick sheet and welded with a base plate of size 250mm x 250mm x 16.3mm thick and provided with 1200mm long single arm bracket with15 degree of angle for mounting street light fitting complete with provision of 04 Nos of ‘J’ type foundation bolts of size not less than 20mm dia, 600mm long embedded in RCC foundation concrete as per manufacturer’s recommendation including necessary earth work, RFR etc complete. A door should be provided at a height of 500mm from the base plate for accommodating and including provision of TPN aluminium bus bar system suitable for connecting up to 4 core, 16 sqmm aluminium cable including 01 No. of 20 Amp SP MCB for street light protection inside the pole shaft and 3 core, 1.50 sqmm PVC insulated PVC sheathed copper conductor cable 1100 volts grade confirming to IS:694 from pole junction box to street light fitting drawn through inside of pole . Radium reflector band / strips of 5cm wide in Green (02 Nos) & White (01 No.) colour shall be provided at a height of 1.25 mtr from base plate. Numbering of pole shall be done in black colour on yellow background at suitable place on the pole complete as specified and directed. Note:-(i) The quoted rate shall deemed to be inclusive of RCC foundation concrete, necessary excavation, earth work & RFR etc complete as per manufacturer's recommendation. Contractor shall submit the pole drawing and foundation drawing as per manufacturer's recommendation for approval of GE before procurement. (ii) Contractor shall producced sample of decorative pole to GE bhopal before finalized of item for approved of design of pole.

Taking down carefully without making any damage of existing street light fitting of any description from any position of old PCC pole and shifting to the new GI pole on serviceable condition including connecting with pvc insulated flexible 2.5 Sq mm 3 core copper wire upto junction box complete all as specified and as directed.

Material and labour for fixing of double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed. Note- earth work shall be measured and paid separately.

M&L earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25 m deep below normal ground level with top edge of earth plate not less than 1.5 m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron including brazing and connected to test point all as shown in electrical plate No. 3 of SSR part I - 2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, galvanised steel strip armoured, heavy duty cable, 1100 volts grade, laid in trenches, passing through pipes/ducts, on walls with shadel, etc including taking out old unserveciable cable, any type with aluminium conductor of size 10 Sqmm nominal cross section x 2 core complete all as specified and directed.

All as per item No. 07.00 herein before but size 10 Sqmm X 4 core complete all as specified and directed.

All as per item No. 07.00 herein before but Size 16 Sqmm X 4 core complete all as specified and directed.