CERTAIN MISC B/R REPAIR TO MH AND AMC UNIT UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

Dismantling of Asbestos Cement (Corrugated, semi corrugated, etc) sheets/PVC sheets or any type in roof covering, complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified and as directed

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified and as directed

Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L or J type cranked hook bolts all as specified and directed.

Dismantling wall and ceiling boards’ fibre, pulp, insulations etc or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and as directed.

Supply and fixing of Providing and fixing HPSC PVC laminated one side Board 6mm thick in ceiling fixed with as per manufacturer’s instructions purpose, 60 X 60 cm size fixed with powder coated Gl frame work for ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including necessary GI wire hangers 2 mm dia for securing frame work to ceiling, and also including necessary notching complete all as specified and directed.

Material and labour for providing and fixing 12mm thick Gypsum board in ceiling fixed with screw as per manufacturer's instructions complete all specified and directed

Material and labour for PVC Wall Lining consisting of 5mm thick hollow profile coloured PVC sheet inclusive of solvent cement and fixing on wall to make frame as and fixing at site on PVC frame as per specifications and drawing.

Material and labour for PVC Wall Lining consisting of 5mm thick hollow profile coloured PVC sheet inclusive of solvent cement and fixing on ceiling to make frame as and fixing at site on PVC frame as per specifications and drawing

Demolition of cement concrete in ground floor and paving/as in sunken portion above ground floor all as specified

Material and labour for cement concrete 1:5:10 type E-2 (using 40 mm graded brick aggregate) as in sunken flooring complete all as specified and directed

Material and labour for bitumen primer for use in waterproofing and dam-proofing treatment @ the rate of .3 litre/sqm complete all as specified and directed

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate 1.2kg per sqm complete all as specified and directed

Material and labour for APP modified polymeric water proofing membrane shall be 3mm thick having weight not less than 3.6kg/sqm. APP modified polymeric water proofing membrane shall five layered with centre core of 100 micron HMHDPE film complete all as specified and directed

Material and labour for 15mm thick rendering in cement mortar (1:3) on brick work or concrete surfaces finishing the surface with even and smooth with using extra cement complete all specified and directed

Supply only integral water proof compound complete all as specified and directed

Material and labour for 25 mm thick cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) to receive the top layer of tiles complete all as specified and directed

Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on brick work or concrete surfaces finished even and fair without using extra cement complete all specified and directed.

Material and labour for rendering 12 mm thick in Cement Mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth, without using extra cement complete all as specified and as directed.

Material and labour for 5mm thick cement plaster in cement mortar 1:3 as on ceiling, soffits of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) all as specified

Material and labour for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer complete all as specified and directed

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

Material and labour for 60mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and directed.

Material and labour for rubber moulded coloured cement concrete chequered tiles 300x300x22 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and directed

Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finished even & smooth w/o using extra cement complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed

Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed

Material and labour for glazed ceramic coloured tiles (premium quality) in vertical surface such as skirting/ dado etc of size 450x300x7mm thick set and jointed in cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick plaster in CM 1:4 to receive the tiles complete all as specified and directed

Material and labour for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bedding layer in cement mortar 1:6 complete all as specified and directed

Material and labour for vitrified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles Not exceeding 0.36 sqm, on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick screed bedding layer in cement mortar 1:4 walls, finished even and rough to receive the top layer complete all as specified

Supply and fixing 18-20 mm thick makrana white marble work (table rubbed and polished) as in steps, jambs, cills, pillars, cooking platform and like in set cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with the shade of marble work incl rounding of exposed edges of marble complete all as specified and directed.

Material and labour for pre- polished green marble as in cooking platform 16 to 18 mm thick over cement screed bed with pre griding and mirror polishing/granite polishing including making of hole for LPG pipe and chamfering the corners to the entire satisfaction of the Engineer-in-Charge..

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed..

Material and labour for Brick work with sub class ‘B’ brick, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified

All as per srl item No. 36.00 here-in-before but except bricks complete all as specified.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4 complete all as specified and directed

Material and labour for cutting holes in brick walls exc half brick but n exc. one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified.

Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified new surface of walls

Taking down chowkhats or frames with shutter (without taking off shutters form the frames) area not exc 1.5 sqm each and removal to store complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutters form the frames) area exc 1.5 sqm but not exc 4.0 sqm each and removal to store complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 2 Sqm Each complete all as specified and directed.

Refixing of shutters including taking down of any description exc 1.00 and n exc 2 Sqm each in same opening complete all as specified and directed.

Refixing of shutters including taking down of any description exc 2 Sqm each in same opening complete all as specified and directed.

Supply and fixing pressed steel door frame double rebates of size 125mm x 60mm with including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in seismic and other similar bands, coping, bed block or similar work including necessary form work as in filling of pressed steel door frame complete all as specified and directed.

Supply and fixing 35mm thick 2nd class hard wood plain framed factory made panelled shutters with panel of 9 mm BWP commercial veneering on both 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated complete all as specified.

Supply and fixing 35mm thick 2nd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.24 (a) of SSR part-I complete all as specified

Supply and fixing 35mm thick factory made flush shutter solid core construction with block board core and plywood face panel one face is covered with decorative veneer with lipping/frame complete all as specified and directed.

Supply and fixing 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC “C” channel having strip of 20 mm width stuck inside with solvent cement rail on either side and as gap inset for top rail and bottom rail, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supply and fixing in the frame and site as specification all as specified.

Supply and fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain, colour PVC sheet reinforced with MS square tube, supplying and fixing opening as per specification and drawing

Supply and fixing galvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.48mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply and fixing in repair galvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.48mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Material and labour for 18/19 mm thick pre-laminated particle board exterior grade, pre-laminated both sides with decorative choice laminations fixed with screw to aluminium frame complete all as specified and directed

Material and labour in repairs 18/19mm thick block boards, grade 2 quality, exterior grade, commercial type, fixed with screws to timber frame work including two coats of synthetic enamel paint over a coat of pink primer and including teak wood 6mm thick liping all around the edges all as specified.

Supply and fixing in repairs 100mm but hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed for PVC Doors complete all as specified and directed.

Supply and fixing in repairs 100mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing in repair aluminum anodised barrel tower bolt 150mm long of extructed section,ISI marked complete all as specified and directed.

Supply and fixing in repair 200mm long aluminium anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed.

Supply and fixing in reapair aluminum anodised handle cast type 150mm, anodised, ISI marked complete all as specified and directed.

Supply and fixing in reapir aluminum alloys anodised sliding door bolt with hasp, staples 300MM (Bolt Type) and fixing clip of sheet cast or extructed section and fixing bolt and sliding bolt of extructed section or cast aluminum alloys and fixed complete all as specified and directed

Supply and fixing 40mm Width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electro galvanised all as specified and directed

Supply and fixing 100mm size hasp and staple, mild steel, wire type, stove enameled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing 100mm but hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed for PVC doors complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing aluminum anodised barrel tower bolt 150 mm long of extruded section, ISI marked complete all as specified and directed.

Supply and fixing 200mm long aluminium anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed.

Supply and fixing aluminum anodised handle cast type 150 mm, anodised, ISI marked complete all as specified and directed.

Supply and fixing aluminum alloys anodised sliding door bolt with hasp, staples 300MM (Bolt Type) and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminum alloys and fixed complete all as specified and directed

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 75mm complete all as specified and directed.

Supply and fixing cast iron door closer hydraulically regulated designation No 3 universal type suitable for door shutter averaging weight between 61 kg to 80 kg and fixed, complete all as specified and directed

Supply and fixing in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

Material and labour for 25mm dia stainless steel pipe curtain rod fixed with & including SS powder coated hooks/brackets , shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provide for complete all as specified and directed

Dismantling timber scantlings 40 sqcm and over in section for unframed work, in any position complete all as specified and directed

Supply and fixing Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

Supply and fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) complete all as specified and directed.

Supply and fixing framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railings and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed

Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises glazed skeleton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 No per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (e) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (f) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: glass pans and painting shall be measured & paid separately under respective item of schedule

All as per srl item No. 84.00 here-in-before but window with glazing bars but with out sash bars . Note wire gauge and painted shall be measured and paid separately under respective item of schedule.

All as per srl item No. 84.00 here-in-before but as in ventilators.

Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

All as per srl item No. 87.00 here-in-before but one coat on old surfaces.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint with red oxide zinc chrome primer complete all as specified and directed.

All as per srl item No. 89.00 here-in-before but one coat on old surfaces.

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing 4mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing for 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm each panes complete all as specified.

Taking down old GI tubing and connection including fittings 15mm bore pipe complete all as specified and as directed.

Taking down old GI tubing and connection including fittings 20mm bore pipe complete all as specified and as directed.

Cutting chases, pinning in making good to facing where required for concealed water tubing or concealed conduit wiring and making good in CM 1:3, cutting not exc 10cm girth etc on brick walls complete all as specified and directed.

Supply and fixing 15mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors, complete all as specified and directed.

Supply and fixing 20mm bore galvanized iron tubing medium grade with all fittings, fixed to walls, ceiling or laid in floors, complete all as specified and directed.

Refixing old steel tubing 15mm dia and connections in new or old position (Walls, ceiling, floors, etc.),complete all as specified and directed.

Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.),complete all as specified and directed.

Supply and fixing in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated fancy type screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

Supply and fixing in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe in repairs complete all as specified and directed.

Supply and fixing in repairs 15 mm bore bib tap cast copper alloy, chromium plated, long Handle Minimum 300mm long fancy type (for Hospital) with capstan headed, screwed down, screwed for iron pipe in repairs for complete all as specified and directed.

Supply and fixing in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms). complete all as specified.

Supply and fixing in repairs plastic seat cover white for water closetfor EWC with flat bottom fixed with mild steel chromium plated or aluminium hinging device complete all as specified.

Supply and fixing in repair Orrisa pattern WC in ground or first floor vitreous china white of size 580mmx440mm fixed in repair incl provision of lime concrete bedding incl breaking up of existing damaged WC seat and connecting flush pipe etc complete all as specified.

Supply and fixing 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair all a specified and directed

Supply and fixing in repair brass chromium plated jet for pedestal pattern water closet including PVC flexible pipe 600 mm long along with necessary fittings complete all as specified and directed

Supply and fixing CP glass corner shelf single complete all as specified and directed

Supply and fixing in repairs WHB mixer chromium plated brass, size 15mm bore screwed down high pressure with lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fixing in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm pipe complete all as specified and directed

Supply and fixing in repairs Vitreous China wash down water closet white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device fixed complete all as specified and directed.

Supply and fixing in repairs PVC 10 litre syphonic action type flushing cistern, low level with inlet, ball valve, float and handle (ISI Marked) including brackets, flush pipe PVC 32mm bore and connection to WC complete all as specified and directed.

Supply and fixing PVC connection 15mm bore size with PTMT nuts of length 450mm fixed in repair complete all as specified and directed.

Supply and fixing in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and directed.

Supply and fixing in repairs Vitreous china urinal half stall type ,white including connection to flushing pipe and outgoing pipe complete all as specified and directed.

Supply and fixing in repairs Chromium plated brass shower rose, swivel type of size 125mm fixed to pipe complete all as specified and directed .

Supply and fixing in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed

Supply and fixing Soap dish, stainless steel approx size 160mm x 160mm x 90mm complete all as specified and directed.

Supply and fixing in repair 32 mm dia PVC waste pipe for WHB complete all as specified.

Dismantling of water tanks any type of capacity exc 500 ltrs n.exc 1000ltrs and removing to store complete all as specified and directed

Supply and fixing 1000 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position any description complete all as specified and directed

Dismantling of water storage tanks any type of capacity exc 250 ltrs and not exc 500 ltrs and removing to store complete all as specified

Supply and fixing 500 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position any description complete all as specified and directed.

Supply and fixing 20mm bore brass ball valve high pressure with epoxy coated aluminium rod & high density polythene float ball and fly nut screwed for iron pipe complete all as specified.

Supply and fixing in repair 20mm bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

Material and labour for 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store complete all as specified

Supply and fixing 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed

Supply and fixing 110 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

Supply and fixing PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified 75 mm complete all as specified and directed

Supply and fixing PVC (SWR) gully trap 125 x 110 mm setting and jointing with solvent cement complete all as specified

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and directed

Material and labour Precast cement concrete 1:2:4 Type B-1 using 20mm graded stone aggregate as in Cover slab for Drain, lintels, beams, in floors, roofs, landing, balconies, canopies, and shelves and the like set in CM 1:6 including necessary form work complete all as specified and directed

Supply and fixing Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling of brick tiles or terracing tiles, single layer on roofs all as specified

Material and labour for 40mm thick brick tiles laid on cement mortar in 1:6 of 15mm thick and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on cement mortar bed all as specified and directed

All as per srl item No. 140.00 here-in-before but except brick tile

Material and labour for Racking out joints/pointing in cement mortar to brick work in walls or to bricks on edges in floors, roof surface channel etc complete all as specified and directed

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Material and labour for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per sqm, and lightly tampered (area of flashings, etc., shall be added to the roof area except bitumen all as specified

Material and labour for brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in foundations, filling and mass concrete, roof padding 50mm thick in average complete all as specified and directed

Material and labour for 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc all as specified and directed.

Cleaning the surface and made free of dirt, foreign particle, laitance followed by frinding all protrusion to make surface modulated. Therefore, inspection for cracks on the surface caused by thermal expansion contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro concrete/ general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight complete all as specified and directed

Supply and applying high built elastomeric water proofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1: (resin; harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprauer by a company authorised applicator complete all as specified and directed

M/S RAJESH CONSTRUCTION COMPANY

NATIONAL BUILDERS

S S CONSTRUCTION

B.P CONSTRUCTION CO