General Fund Court Building Work in Kilpennathur Town Panchayat

Amount

Dismandling of Pcc and depositing on bank with in the intial lead of 10m and a lift of 2m and also conveying from the town panchayat dumping area with in the town panchayat limit etc complete complying with standard specifications.

Dismandling of the existing weathering courseand depositing on bank with in the intial lead of 10m and a lift of 2m and also conveying from the town panchayat dumping area with in the town panchayat limit etc complete complying with standard specifications.

Plain cement concrete 1:4:8 mix using 40 mm ISS size HBG metal from approved quarry including cost and conveyance of all materials to work site and all other labour charges for mixing, leveling and curing etc., completed as per standard specification.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using Fly ash bricks of size 23x11x7cm including finishing, curing, etc., complete complying with standard specification

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Providing and Applying high performance solar reflective & Acryl ate silicon based Waterproofing coating which is single component, cold applied, water based acrylic and resistant water proofing treatment to the Existing Roof screed surface applied @ 1.5 l/m2 in 3 coats to achieve 1mm DFT, having tensile strength 2N/ mm2 confirming to ASTM D 412; Elongation at break ≥ 200%, Abrasion resistance 21mg confirming to ASTM D 4060 and Crack bridging ability up to 2 mm, . The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification

Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 50 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Supply and laying in Cuddapah slabs of 40mm thick over a base mortar in CM 1:3 (One Cement and Three Plastering Sand (P - Sand)) 20 mm thick and pointed with cement mortar 1:3 ( one cement and three Plastering sand) usimg Black oxide complying with standard specification (P & D data 53)

Supply and fixing of following L angle truss including cost of Material conveyance of all material, fabrication and fixing charges etc. Complete as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. Complete as Directed by the Departmental Officer.

Fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyester coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like Malabar Mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required size and making ornamental designs as per the site condition and as directed by the departmental officers. Supply and fixing of following L angle truss including cost of Material conveyance of all material, fabrication and fixing charges etc. Complete as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. Complete as Directed by the Departmental Officer.

CK Constructions (BID ID -1554677)