Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹9.7 Laccepted-aoc | accepted-aoc |
Tender Value
₹13.7 L
EMD Value
₹34,326
Closing Date
7 Mar 2025, 11:00 pmClosed
Kuvempu University
Kalaraju C-AEE-EE
REPAIRS AND PAINTING TO SHATHAMANOTSAVA BHAVANA AT KUVEMPU UNIVERSITY CAMPUS SHANKARAGHATTA
KVU/2024-25/BD/WORK_INDENT2
KVU/2024-25/BD/WORK_INDENT2
Open
Buildings
Electronic Documents, First(One Cover)
Kuvempu University shimoga
1 document required · 1 mandatory
₹500
₹34,326
7 Mar 2025
28 Feb 2025
6 Mar 2025
REPAIRS AND PAINTING TO SHATHAMANOTSAVA BHAVANA AT KUVEMPU UNIVERSITY CAMPUS, SHANKARAGHATTA
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 g.
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. - 1...
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete. Flexible pipe : 40 mm dia
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts,
collar and bush of approved quality and colour. - 15 mm nominal bore with 450 mm length
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing solid plastic seat with lid for pedestal type W.C.
pan complete : White solid plastic seat with lid
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
Providing and fixing PTMT urinal cock of approved quality and colour using 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 g.
Providing and fixing PTMT, push cock of approved quality and colour:15 mm nominal bore, 80 mm long, weighing not less than 46 g
Removing the G.I. pipes, cleaning, washing and using at spot or conveying from workspot to office/store with all lead and lift including removal of all items such as collars, elbows, tees, bends, gl...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing PTMT grating of approved quality and colour.- Circular type - 100 mm nominal dia
Providing and fixing plain rolled Glass 4mm thick with teakwood beading
Repairing and fixing shutters (panelled or glazed) to doors, windows,
ventilators and cupboards.
Repairing door and window frames with available wood to the required
Providing and fixing factory made pre fabricated non-monolithic Premium
R.C.C. Door Frames factory manufactured in separate parts and assembled at bolts nuts system with mechanical table vibrating as ...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...
Clearing Grass and Removal of Rubbish & dumping to outside periphery by manual means. Ref to MoRT&H : IRC - 201
Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge.
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plasterin...
Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...
Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level ...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10...
Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...
Repairs to existing Aluminium partition, refixing and relocating including cost of material,labour, complete as per specifications.
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
Cleaning stone parapets removing of dirt dust etc., using suitrable soap powder, coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes, plastric brushjes, mugs, booster pum...
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One coat applied @ 0.90 l/10 m²) including preparing the surface after thoroughly cleaning the surface to remove all d...
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two coat applied @ 1.67 l/ 10 m²) on existing cement paint surface including preparing the surface after thoroughly cl...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of En...
Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 200 mm dia PVC BEND
Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 200 mm dia PVC Tee
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete : 250x10mm
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 200mm
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS hinges 100 mm
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992
with necessary screws etc. complete : 125mm
Providing and fixing SS Pillar Cock - Economy
Providing and fixing Sifan set washers
Providing and fixing Ball valve set washers
Providing and fixing Tap washers
Providing and fixing Connection pipe washers
Providing and fixing Flush out button
Providing and fixing Aluminium Stay bars for windows
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Dwg_Shathamanotsava build.pdf
Design Document • 0.15 MB
bid doc_S-Bhavan_kw1.doc
Tender Document • 4.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .