REPAIR CLEANING OF SEWAGE LINE MANHOLES CONNECTED WORK IN OMQ CHETAK AREA AT AF STATION MAHARAJPUR

Amount

Cleaning of chocked /blocked sewage lines of any bore, of any description and in any position by taking out loose sediment sand, grit, ash, sludge, rags, fibers or vegetation from the following depth of sewage line or by rodding/by mechanical means and well flushing with adequate water including removal of sludge/debris to a distance exc 250 m but nex 500m and buried under ground complete all as as specified and as directed. (a) Upto 1.00 M depth

(b) Exceeding 1.00 M and n exc 1.5 M depth

(c ) Exceeding 1.5 M and n exc 3.00 M depth

Opening & cleaning of blockage from kitchen /bath traps or WC any pattern by rodding or manually upto and including Ist manhole complete all as directed .

Cleaning of manholes of depth not exc 1.5 M deep mechanically or manually by taking off sludge/any deletrious material from the existing manhole of any size and removing the sludge to a distance beyond 2.00 KM from the habitation in sealed container and depositing the same complete all as specified and directed.

All as per item No-5 here in before but depth exc 1.5 M and n exc 3.00 M deep complete all as specified and directed

M&L for punchering existing RCC / SGSW pipe line of any dia of any places between manholes for cleaning blockage in pipes including necessary excavation, returning, filling and removal of soil and making good punchured area with CM 1:1, including cutting / clearing away grass vegetation, saplings, shrubs, brushwood, undergrowth & roots etc., along pipelines both sides upto a distance of 2.00mtr complete all as specified and directed.

Demolition of brick work built in cement mortar and incl all quins, arches, pillars etc complete all as specified and directed

M&L for brick work with sub class 'B' bricks old size , straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and as directed.

All as per item No. 9.00 here in before but except bricks complete all as specified and directed.

Demolition of cement concrete n.exc 15 cm thick below or above ground level including removal demolished material exc.250m and depositing where directed upto total distance of 1.5Km complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing & rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8 mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic digital tiles ( 450 x 300 mm size) 6-7 mm thick coloured for work on vertical surfaces such as skirting and dado/riser etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces as in backing for tiles in dados/skirting complete all as specified and directed.

Taking down cement plaster from brick or stone walls, etc including raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick plaster in CM 1:4 on brick work , finished even & smooth without using extra cement complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate), as in coping including necessary form work complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 ( using 20 mm graded aggregate) as in surface channels, drain and similar nature of work complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of an approved colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an approved colour having tensile strength of 550 mpa as in ridge, fixed with self tapping screws complete all as specified and directed.

S&F mild steel work as in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L preparation of new steel surfaces exc 10 cm width or girth and applyinjg two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including replacement of cast iron P trap of 100mm and connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified. CAT Part No 2071 of CERA or other as approved.

Dismantling of timber scantling (Unframed Work) 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed.

S&F mild steel rolled section for structural steel work as in vertical post, main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guides for sliding crane, fixed with angle cleats or other connecting plates/ bolts, conforming to Fe-410-W complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards/slabs/blankets of any description and thickness including cover fillets or aluminium grid frame work complete all as specified and directed.

S&F HPSC pre-prime 4mm thick non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum or MS galvanised snap grid frame work with hold down clips in ceiling complete all as specified.

S&F in repairs suspended false ceiling grid system of size 600 x 600 mm with main runner of size 32 x 24 x 0.8 mm, cross tee of size 26 x 24x 0.80 mm and wall angle of size 22.2 x 22.2 x 0.65 mm in ceiling suspended @ 1.2m c/c both way with 1.60 mm dia GI wire fixed with steel dash fasterers or from purlin of roof with butterfly clips hold down etc, complete (main runner/ cross tee / wall angle of MS powder coated) as per manufacturere instruction complete all as specified.

Refixing HPSC pre-prime 4mm thick non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum or MS galvanised snap grid frame work with hold down clips in ceiling after dusting and applying two coat of oil bound distemper complete all as specified.

Dismantling and Refixing suspended false ceiling after carrying out necessary minor repairs to damaged parts of snap/replacing the damaged part of snap grid with new grid system of size 600 x 600 mm with main runner of size 32 x 24 x 0.8 mm, cross tee of size 26 x 24x 0.80 mm and wall angle of size 22.2 x 22.2 x 0.65 mm in ceiling suspended @ 1.2m c/c both way with 1.60 mm dia GI wire fixed with steel dash fasterers or from purlin of roof with butterfly clips hold down etc, complete (main runner/ cross tee / wall angle of MS powder coated) as per manufacturere instruction complete all as specified.

S&F in repairs 10 ltrs capacity PVC valve less symphonic action type flushing cistern low level, white ,with inlet, ball valve float and handle including flush pipe brackets complete all as specified.

S & F in repair 15mm bore fancy type angle stop cock, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F in repair 15 mm dia Bib taps, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S&F in repair PVC connection 15 mm size with PTMT nut of 450 mm length complete all as specified and directed.

S&F in repairs PTMT waste pipe 32 x 800 mm for WHB / sink, complete all as specified and directed.

Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed.

Supply only fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

S&F GI tubing 15mm bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

S & F in repair Vitreous china wash basin , white , flat back, size 550 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S&F in repairs viterous China WC pan pedestal pattern white with seat cover and hanging device (excluding flushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor as per existing complete all as specified and directed.

Excavation in trenches in sof/loose soil n exc 1.5 M wide & n exc 1.5 M in depth shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n exc 1.5 M wide and exc 1.5 M deep but, n exc 3 M deep for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Demolition and breaking up drain pipes (PVC / SGW / AC or CI Pipes) set in any mortar of (75mm / 110mm / 100mm / 150mm / 200mm / 250mm) dia of pipe complete all as specified and directed.

Demolition and breaking up of 75/110 mm bore PVC/CI pipes fixed along walls/floors etc complete all as specified and directed.

Returning & filling- in soil including spreading, levelling watering and well ramming in layers not excd 25 cm thick each complete all as specified and as directed.

Removing excavated material to a distance exc 500m but not exc 1.5Km and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

S&F salt glazed stoneware pipe of 150mm bore grade 'A' laid in trenches and jointed in CM 1:1 including testing all as specified & directed.

S& F 200 mm bore reinforced concrete pipes class NP-2 laid and jointed in trenches complete with collars complete all as specified and directed.

S& F 150 mm bore reinforced concrete pipes class NP-2 laid in trenches and jointed complete with collars complete all as specified and directed.

M&L for concrete bed to pipes in PCC (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid to slope and tested for 150 mm bore sewer pipe line complete all as specified and directed .

All as per item No-53 here in before but for 200 mm bore sewer pipe line complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 6 to 8 mm dia mild steel TMT bars , cut to length, bent to shape required, including cranking, bending for slab , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F in repairs framed work such as grills,gratings, etc.. with ends of bars shouldered , framework of water tanks/ MH cover frame work and similar work con- forming to Fe.290.Gde complete all as specified and directed.

M&L for precast RCC 1:1.5:3 type A1 (using 20 mm graded stone aggregate) as in cover slab placed on manholes/drain incl necessary form work complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls in repairs including clamps all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls in repairs including clamps all as specified and directed.

S&F in repairs 75 mm bore sand cast pipes cast iron soil , waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed.

S&F in repairs 110 mm bore sand cast pipes cast iron soil , waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) pipe bends any radius with accessible door including cutting out of wall and making good the surface all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius with accessible door including cutting out of wall and making good the surface all as specified and directed.

S&F cast iron branch pieces single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel 75 mm bore with oval access door in repairs complete all as specified and as directed.

All as per item No 65 above, but 110 mm bore complete all as specified and directed.

GWALIOR TRADE LINK

M/s Kishan Construction Company

R.B. ENTERPRISES