REPAIR TO Md ACCN OF 11 UNITS OF STAFF QUARTERS UNDER AGE BR II AT GE FAIZABAD

Amount

Taking down Shutters of any description exc 1 sq. m each but n.exc 2. sq m each, complete all as specified.

S & F 35 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one face is covered with decorative face veneer with lipping/frame to match complete all as specified .

S & F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats , complete all as specified.

S&F for 150 mm long MS ordinary rat tail rod pattern spring including roller and roller plate , complete all as specified.

S&F Aluminium anodised barrel tower bolts 200 mm of extruded section and fixed , complete all as specified.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified .

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , complete all as specified.

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor ,complete all as specified .

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapless , complete all as specified.

M&L preparation of new wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting two coat with synthetic enamel over one coat of pink primer complete all as specified .

M&L preparation of old wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting two coat with synthetic enamel , complete all as specified .

Taking down steel frame (with shutter without taking off shutter from frame exc 1.5 sqm each.) complete all as specified.

Taking down steel frame (with shutter without taking off shutter from frame exc 1.5 sqm but n.exc 4 sq m each.) complete all as specified.

S&F 15 micron coloured anodised aluminium sections in sliding type windows and including necessary rollers, handles, locking arrangements, glazing clips, joining cleats etc., complete all as specified.

Supply only 5.5mm thick Sheet glass, ordinary quality, in squares exc 0.5 sq. m each pane & including rubber beading in aluminium windows , complete all as specified.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing , complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour pvc 'C' channel having a PVC sheet strio of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails,lock rail and bottom rail on either side and as gap insert for top rail and bottom rail,Panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supply anf fixing in the frame at site as per specification and drawing.

S&F 100mm long butt hinges medium grade stainless steel and fixed , complete all as specified.

S&F Aluminium anodised barrel tower bolts 150 mm of extruded section and fixed , complete all as specified.

S&F 125 mm long extruded aluminium alloy handles, fabricated type,anodised , complete all as specified.

M & L For Framed work for cupboard Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary,gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe 290, Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') , complete all as specified.

S&F for 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face,fixed with screws to timber frame workas in cup board shutters, partitions, pelmet boxes, shelves etc., including suitable iron fixing brackets, complete all as specified.

S&F for 30mm width of flaps continuous piano hinge mild steel,bright finished or electrogalvanised , complete all as specified.

S&F Aluminium anodised barrel tower bolts 100 mm of extruded section and fixed , complete all as specified.

S&F aluminium anodised Hasp and staple 75mm ,safety type brass hinge pin including bolt to hinge plate and fixed with screws , complete all as specified.

S&F brass knobs 35mm to 40mm dia , complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubish off the premises , complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. , complete all as specified.

M&L screed bed or bedding layer of cement mortar (1:6) 15mm thick for laying floor finises of tiles , complete all as specified.

M&L for rendering 10mm thick in CM 1:4 on verticle surfaces of wall for fixing of wall tiles , complete all as specified.

M&L for glazed ceremic coloured tiled in vertical surfaces 300mmx450mmx7to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match , complete all as specified.

Material & labour for non skid ceramic coloured tiles 7mm to 8mm thick Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement , complete all as specified.

All as per item no. 32 but on vertical surfaces on skirting.

M & L for green marble Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade , complete all as specified.

M & L for kota stone slab 20-25mm thick in steps, jambs, pillars, win dow-cills, and like in cement mortar (1:4) including point ing in cement (1:2) using marble dust with admixture of pigment to match with shade of stone laid over cement screed and jointed , complete all as specified.

Supply and fixing in repair for stainless steel curtain rod 18 to 20 mm dia including steel bracket complete all as specified .

Supply only two nos stainless steel finials (Latto) to be fixed with 18/20 mm curtain rod.complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm bore , complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm bore , complete all as specified.

S & F 15 mm bore GI tubing medium grade with all fittings and fixed complete to walls or laid in floors , complete all as specified.

S & F 20 mm bore GI tubing medium grade with all fittings and fixed complete to walls or laid in floors , complete all as specified.

Taking down cement plaster from brick or stone walls any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc. , complete all as specified.

M&L for rendering 15m thick cement plaster on other than fair faces of brick work or concrete surfaces CM (1:6) finished even and smooth without using extra cement , complete all as specified.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in CM (1:4) finishing the surface even and smooth without using extra cement , complete all as specified.

M & L rendering in ceiling, chajja and like items, 5 to 10mm thick in CM 1:3 on fair faces of brick work or concrete, surfaces, finishing fair and even , complete all as specified.

Complete removal of existing treatment and applying two coats of oil bound distemper over 1mm thick wall care putty , complete all as specified.

M&L for preparation of old decorated surface of ceiling and applying one coats of whites wash complete all as specified.

M&L for preparation of new plaster of wall and applying two coats of oil bound distemper over 1mm thick wall care putty and primer on plaster surfaces complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior weather coat paint on over a coat of primer complete all as specified.

M&L for complete removal of existing treatment and applying two coats of exterior weather coat paints on one coat of primer existing surface on external wall complete all as specified .

M&L for preparation of ceiling surfaces and applying three coat of white washing on new plastered ceiling surfaces .

Dismantling of PVC water storage tank exc 250ltrs and not exc 500 ltrs capacity and removing to store , complete all as specified.

S&F 500 ltrs capacity Rotational moulded polythene water storage tanks in three layers (cylindrical vertical with close top) hoisted and fixed in position all as specified in SSR Part-I , complete all as specified.

Disconnecting existing tanks of capacity exc 250 & n.exc 1000 ltrs, setting aside (or lowering if required) for repairs, including cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified

Supply only 20/25mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwedfor iron pipe fixed complete.

S&F Gun- metal,globe or gate valves with iron wheel head,screwed both ends for iron pipes for 20mm bore of pipe complete.

S&F (in repairs) Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified & directed by

Supply and fix in repairs Brass chromium plated tubular towel rail with hook, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and directed.

Supply and fixed in repair bib tap chromium plated, screwed for iron pipe or brass ferrule, 15 mm bore and fixed in repairs, complete all as specified and directed.

Supply 15 mm bore pillar tap, cast copper alloy with capstan heads chromium plated , fancy type , screwed for iron pipe or for brass ferrule fixed in repairs.

Supply only, PVC connection 15mm bore 450mm long hexagonal brass chromium plated nuts and washers on both sides complete as specified and directed

Supply and fix shelf /corner glass diplomat assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Supply & fixing CP brass angle valve 15 mm bore , complete all as specified.

S&F 15mm Stop valve, fancy type, chromium plated with long shank and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repair

S & F vitreous china wash hand basin with padestal white, flat back, size 550 X 400 mm excluding taps, wash, chain and plug and procelain stopper but including brackets cutting for pinning in ends of brackets or erecting stand and waste coupling and waste pipe (half or full thread) min weight 32mm-45 Gms/40mm-60Gms)

S & F in repairs vitreous china squatting pan, Orissa pattern, size 580 X 440 mm white, with integral foot rests (excluding cistern and flush pipe) but including connection to trap, and to flush pipe, anti-Syphonge pipe,and incl trap set in lime concrete etc complete including making good to floor complete all as specified and directed.

S&F in repair for 10ltrs PVC valveless,syphonic action type flushing cistern low level white with inlet,ball valve,float and handle including brackets.

S&F in repairs Brass chromium plated shower rose 125mm sizewith or without swivel joints any size, including fixing to steel pipe or union complete all as specified and as directed by Engr-in-Charge

S&F stainless steel kitchen plate rack 750 x 900mm of fixed in repair all as specified and as directed.Make-Blue star

S & F in repair stainless steel kitchen sink with drainage board of over all size 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm, 1 mm thick with plug washers and wastes ; including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe.

Demolition of concrete in ground floor, roof,pavings nexc 15cm thickness including floor finishes like tiles if any of any description.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C - 2 using 40 mm graded crushed stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even complete all as specified and directed.

Demolition of existing roof treatment on roof any thickness including plastering and leeping (whether full thickness removed and clening of roof with water ,complete all as specified and directed .

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded crushed stone aggregate) for roof Padding complete all as specified.

M&L Water proofing treatment on RCC roof of (Multistorey Bldg) etc, M&L for 10 mm thick plastering in cement mortar 1:3 finished even & smooth with out using extra cement with water proofing compound complete all as specified. Note:WPC measured and paid seperately.

Providing Atactic Polypropylene polymer (APP) modified five layered prefabricated waterproofing membrane with thermal fusible properties on both side having minimum 3.00mm thick and unit weight not less than 4.00kg /sqm reinforced with non-woven spun bonded polyester reinforcement < -2 C cold flexibility. The layer of the membrane shall be laid using butane torch and sealing all joints properly ,leaving no bare edges or end of APP membrane and finishing the surfaces with trowel or otherwise to obtain a uniform surfaces . The minimum side lap and end lap shall be kept at 75mm and 100mm respectively. The membrane shall be laid over a coat of bituminous primer @ 0.300 kg/ltr per sqm made by the same membrane manufacture after necessary surfaces preparatory works such as cleaning the surfaces thoroughly, shaping mouth of outlets including cutting grooves (50mm x50mm) in parapet and inserting edges of membrane and mending goods damage by sand cement mortar (1:4) and shall be finished in all respect as per directed by Engr-in-Charge. Note: - Water proofing treatment will be done by manufacturer of APP membrane or through their authorized specialized agency/ applicator which will further have to rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise.

Applying evenly a tack coat of industrial bitummen 85/25 at the rate of 1.20 Kg per sqm including cleaning surfaces complete all as specified.

M& L for cement concrete tiles 20cmx20cmx20mm thick machine pressed set in jointedand pointed in net cement slurry in roof cut and polisdhed laid on 15 mm thick bedding layer in CM (1:4) mixed WPC complete all as specified and directed by Engr-in-Charge.(Note :WPC will be measured and paid sepreatly)

Supply only liquid water proofing compound ISI marked as approved by GE

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit writing etc and making good, cutting not exc 10cm girth

Demolition of Concrete of any description and in any position not otherwise specifically provided for kitchen plate form etc

M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded stone aggregate) as cooking platform/si etc, including necessary formwork complete all as specified and directed

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all as specified and directed.

S&F for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all as specified and directed.

M & L for Use & waste of form work for fair finished flat surface to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified.

Demolition of Brickwork or stone boulder masonry built in cement mortar or cement complete all as specified and as directed.

M & L for brick work with sub class bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 , complete all as specified.

Repairs to broken edges of roof projection , chajja, facia, Fins and simillars works girth n exc 45 CM with 15 mm thick plaster including cutting of reinforcement as required , dubbing coat in CM 1:3, required PCC 1:2:4 using 12.5 mm stone aggregate up to 4th storey bldgs complete all as specified and directed by EIC.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories)., complete all as specified.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm, complete all as specified.

S&F PVC (SWR) bends any radius of bore 110 mm, complete all as specified.

S&F stack clamps made out of 25mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for any type of bore pipe, complete all as specified.

M & L for PVC (SWR) multi floor trap with grating including jointing with solvent cement, complete all as specified.

S&F in repair Rimless Single piece-WC with UF soft close seat cover, Hinges,Fixing Accessories, Accessories Set and Cistern fittings, Size: 390x710x720 mm,, including connection to trap and drain , complete all as specified .Make -Jaguar Modle no VGS-WHT-81853S300UF or equivalent as approved by GE.

M&L preparation of old painted steel surface any description , not otherwise described ,over 10 cm width or girth and painting two coat with synthetic enamel paint complete all as specified .

S&F in repair Chromium plated fancy type Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses mixture of standard quality for mixing hot & cold water, with all the fitting etc , complete all as specified. Make Jaguar ORP-10011BPM or equivalent as approved by GE

Taking down carefully aluminium point wiring any type of complete,switch socket 5amps & power point etc including switches and making good distured surfaces of walls / ceiling etc , complete all as specified.

M & L point wiring for one light point/fan point controlled by one, one way switch using 1.5 Sqmm nominal cross sectional area multistranded copper conductor,FRLS PVC insulated unsheathed cable in and including 20 mm dia or higer size PVC concealed conduit and fittings with 1.5 Sqmm nominal cross sectional area used as continuous earth wire and connected to earth dolly including metal flush boxes with white cover plate and making neccessory electrical connection of modular type Switches, sockets,regulators etc all as specified and directed for One light point or fan point controlled by one switch , complete all as specified.

All as per item no. 99 but for One bell or buzzar point controlled by one push button on the same circuit or independent switch .

All as per item no. 99 but forOne 3 pin socket outlet 5 amps on same board with other switches.

All as per item no. 99 but for One 3 pin socket outlet 5 amps socket outlet independent but below the switch board of light point in the same vertical plane .

All as per item no. 99 but forOne light point controlled by 2 Nos two way switch.

M & L for point wiring with 2.5 Sqmm (nominal cross-sectional area) FR PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC concealed conduit of adequate size with all fittings and accessories including metal flush boxes with 3mm thick plastic laminated sheet top cover complete including FR PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one 16 Amp socket outlet on independent board, complete all as specified.

S & F switch piano flush type one way 6 Amps, complete all as specified.

S&F switch piano, flush type, one way, 16 Amps , complete all as specified.

S & F switch piano flush type 2 way 6 Amps, complete all as specified.

S & F socket outlet 5 pin, 6 Amp flush type, complete all as specified.

S&F socket 2 in 1, 3 pin, 5 and 16 Amps flush type complete all as specified and directed.

S & F ceiling rose surface bakelite three terminals , complete all as specified.

S & F stepped type electronic fan regulator flush type , complete all as specified.

S & F bell push flush type 5 Amp, complete all as specified.

Supply & fix bell /ding dong 230 volts Ac single pole, complete all as specified.

Taking down Old unserviceable sub main wiring any size, complete all as specified.

M & L for sub main wiring with two run of 6.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including concealed PVC conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB , complete all as specified.

Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc. of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash/ paint/ distemper wherever required , complete all as specified.

S&F epoxy powder coated MCB, DB, double door TPN horizontal 4 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.

S&F MCB, TPN ,63 A, 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning, complete all as specified.

S & F MCB SP 40 Amps, 230 Volts C curve 10 KA, including necessary connection , complete all as specified.

S&F epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall , complete all as specified.

S & F MCB SPN 32 Amps, 230 Volts 'c' curve10 KA, including necessary connection , complete all as specified.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position , complete all as specified.

S & F lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as speicfied.

Taking down old unserviceable light fitting any type, complete all as specified.

Supply and fixing indoor luminare batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 20 W incl twin twisted copper conductor flexible wire from ceiling rose to connector, complete all as specified.

Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size , complete all as specified.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including testing , complete all as specified.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection , complete all as specified.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm ×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia (7.50 m long) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified.

awashyakta enterprises

M/s SHIVAM CONSTRUCTIONS

K R KAUSHAL AND SONS

JYOT BUILDERS

A ONE ENGINEERING

Saket Traders

Jairajyadav security services

Sai Ram Associates

G S ENTERPRISES