03/EUCC-V/LESA/2025-26

Amount

Safe Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dump store and JE dump store to work site within municipal areas.

33KV 3X300 SQ MM XLPE CABLE

33 KV ST/TH C/J KIT 3X300 SQ MM

33KV END TERMINATION O/DOOR 3X300 SQ MM

STP 11 M long

33 KV pin insulator

Top channel 125X65 MM (13.10km)

MS angle 65x65x6MM 5.8 kg / mtr

33 KV pin with nut

M S Earthing Rod 20x2500 mm

LT XLPE Cable AL.1X400 Sq.mm.

Digging of pit in Kachcha/Pakka land in depth upto 1/6 length of pole, Dragging of STP from nearby place.

Grouting of pole in ratio 1:4:8 in cement, sand and brick ballast and Construction of pole plinth 300 mm x 450 mm above ground level in 1:2:4 in cement, coarse sand and stone gritt as per RESPO norms.

Painting of new erected ST pole with two coat of Red oxide paint, PO red paint at top of pole 2 mtr and balance by two coats of best quality aluminium paint ISI mark as per norms.

Laying of D/C 33 KV 3x300 Sqmm XLPE cable in parallel in normal soil by digging of trench 1050 mm deep & 750 mm wide its boxing with bricks laying of cable & seperation of cable by brick wall, filling of sand upto top and covering with stone slab after laying of cable (All material will be provided by contractor except 33 KV cable)

Laying of 33 KV XLPE cable 3x300 sq mm S/C in GI- Pipe 150 mm dia by digging of trench in Kachcha/Pakka of suitable size at road crossing (All material will be provided by contractor except 33 KV cable)

Laying of single 33 KV 3x300 Sqmm XLPE Cable by drill method

Laying of single 33 KV 3x300 Sqmm XLPE Cable by drill method in HDPE Pipe (Required HDPE Pipe 6" dia will be provided by contractor)

Route survey & profiling of proposed 33 KV line along with Plotted cable layout route on graph paper (i.e. depth underneath and distance from either side from prominent reference fixed point ) the reference point must not be more than 100 mtr.

Fabrication & erection of 33 KV Exposure type double pole with the provision of bus bar on 11 mtr. long ST-Pole with fixing of necessary clamps & other accesories like 02 No. Channel 125x65mm (3200 mm each) , 02 No. Bracing angle 65x65x6 mm (2800 mm each) for supporting the hoisting of cable on pole, 09 No. Pin insulator with pin, Danger board, number plates and Barbed wire etc. Its jumpering by single core PVC Al. Cable with proper size of lug (All required materials will be provided by contractor except ST- pole, steel parts, Pin insulator with pin and PVC Al. cable)

Hoisting of 33 KV 3x300 Sqmm XLPE cable on D/P through GI- pipe of size 6" dia 3 mtr long including its jumpering complete with holding clamps, PG clamps, Nut & bolts (All material will be provided by contractor)

High Pressure Testing of 33 KV cable. Testing equipment will be arranged by contractor.

Supply and fixing of cable route marker of 33 KV

After complection the work balance material return to store daliganj

KHUSHI ENTERPRISES (BID ID -5206120)

SINLESS ELECRICAL CO. PVT. LTD. (BID ID -5207991)