PROVN OF SHED TO WATER POINT AND RENOVATION OF WATER POINT NO. 2 IN KV AYODHYA CANTT UNDER AGE (I) AYODHYA CANTT

Amount

Excavation in post holes (or similar holes) in soft/looe soil each n.exc 0.5 cum, getting out , returning, filing in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surfaces complete all as specified and directed by Engr-in-Charge .

M&L for PCC (1:2:4) type B2 (using 40 mm graded crushed stone aggregsate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for rolled mild steel work as in roof trusses (framed), trussed purlins, crane gantries, rails, fastenings and heavy bracket framing (using beam, tee, angle channel or flat sections, squre or ractangular hollow sections) including distance pieces, cleats, gusset plates, base plates etc conforming to Fe 410-W (Gde E- 250) quality-A complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in-Charge.

M&L for rolled mild steel work as in main and croos beams, hip and jack rafters including angle section, pipes, channel, beam section, gusset plates etc) including fixing with welding, nut & bolts, clamps etc upto 8.0 m height conforming to Fe 410-W (Gde E- 250) quality-A complete all as specified and directed by Engr-in-Charge.

M&L for preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness, laid in floors, aprons etc, bedded and pointed in any mortar complete all as specified and directed.

M&L for 18- 20mm thick machine cut kota stone slab (in full length one piece) laid in flooring over and including 20mm thick screed bed or bedding layer in cement mortar (1:6), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded aggregat) as sub base floor complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings etc complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) comlete all as secified and directed. Note : Brick work shall be done using coarse sand only.

M&L for 15mm thick rendering cement plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement comlete all as secified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and directed by Engr-in-Charge.

M&L for RCC (1:2:4) type B-1 (nominal mix) (using 20mm graded crushed stone aggregate) as in roof slab supported on walls, beams and columns, in floors, roofs, landings, balconies etc and in shelves and the like complete all as specified and directed by Engr-in-Charge.

Use & waste of form work to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) for fair finished flat concrete surfaces complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dsmantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles from site and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, laid in flooring etc over & including 15mm thick screed bed in cement mortar in (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by Engr-in-Charge.

M&L for joint free glazed coloured ceramic tiles of size 350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick in vertical surfaces as in dado/ skirting over & including10mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by Engr-in-Charge.

Demolition of cement concret of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC (1:3:6), type C2 (using 40 mm graded stone aggregate) as in floors /Pavings / sub base etc complete all as specified and directed.

M&L for non skid coloured heavy duty (Jhonson Endura) tiles 8 to 10 mm thick of size 300mmx300mm / 400mmx400mm, laid as in floors or pavings over & including 15 mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by Engr-in-Charge. Make : Jhonson Endura (combination of flocept light/ flocept dark tiles).

M&L for cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in surface channel and drains including finishing the surfaces even and smooth complete all as specified and directed..

S&F in repair, 15 mm dia bore cast copper alloy bib cock, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed by Engr-in-Charge.

S&F in repair, 40mm bore PVC waste pipe of any length as required at site complete all as specified and directed by Engr-in-Charge.

S&F in repair, mild steel stack clamps, made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed by Engr in charge.

SAI RAM ASSOCIOATES (BID ID -3281522)

ABC CONSTRUCTION CO. (BID ID -3281126)

Shivam Enterprises (BID ID -3280796)

JYOT BUILDERS (BID ID -3281543)

K R KAUSHAL AND SONS (BID ID -3285551)

Khan Brothers (BID ID -3279802)

Jaya Construction (BID ID -3281026)