WATER SUPPLY SCHEME BHALWAN OF BLOCK DHURI DISTRICT SANGRUR PRWSSIP Component 2ai

Amount

Component -1

Providing and installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed make capable of delivering 745 LPM against a head of 85 mtr (27.50 BHP) along with including M.S. Column Pipe of suitable size 100mm=50 mtr (in 3 mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respect as per standard Specifications. Including cost of submersible cable 6mm2 = 100 mtr.

Providing & Fixing Electric Panel Board (ISI marked) Consisting of electric appliances such as Automatic star Delta Push Button with oil immersed starter, Main switch, VM ampere Meter, E LCB, shunt capacitor, single phase Preconter, including lamps, Kit-kat etc. Complete in all respect.

Repair of Pump Chamber

Supplying & fixing glass panes including special metal sash putty of approved make.

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

Hollock wood doors shutter windows including Hinges, Screws, Chocks Cleats, Stops and Cords etc. complete fixed in position (double Leaf) @ Paneled glazed or glazed and paneled.

Repair of roof complete in all respects.

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent.

Providing and fixing of electric tube set of reputed make

Construction of gravel pit inside the Pump chamber complete and as per drawing.

Repair of electric fitting complete in all respects.

Repair of OHSR

Repair of Expansion Joint. Size 150 mm i/d complete in all respects.

Repair of Wall leakage including scraping & plastering complete in all respects.

Painting of OHSR pipes including cost of labour & material complete in all respects.

Providing & fixing aluminium ladder inside the tank complete in all respects.

Repair of brick masonry over flow houdi of size 1.20 x 1.20 x 1.20 m for OHSR complete in all respects as per analysis A-21.

Repair of plinth protection around OHSR with masonry toe wall & inside earth filling with lead 5 kms. Complete in all respect as per drawing D-9 & Analysis of Rates A-10-1 to A-10-6 complete in all respect.

OHSR 10000 ltr capacity outer dia of toe wall = 7.60 m

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects.

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7.

Repair of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-5.

Repair of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing D-10 (45 mtr)

Repair of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing with including D-4 & Analysis A-6 complete in all respects.

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Detail of Repair and minor Replacement of existing pipe line

Provision for making new connection with exit pipe line as per analysis A-20 complete in all respects.

Hand boring Horizontally for crossing of pipe under road or any other obstacle by using Auger/Bocki method. Including excavation, stringing and jointing of pipe upto 160 mm complete.

Automated water controller switch to start or stop the pump based on water reservoir level complete in all respects.

Component -2

Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Component -3

Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width included excavation.

PVC pipe 90mm o/d 6Kg/sqcm

PVC pipe 63mm o/d 6Kg/sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department With each of Size 0.9m x 0.9m

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63 mm o/d

Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects as per analysis A-25

PVC pipe 90 mm o/d

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Providing & fixing MS Sign Board as per standard size of DWSS as per analysis A-24.

Cost of Component-4 (Operation and maintenance)

Provision for sodium chloride for disinfection of water Complete in all respect.

Credit of Old Machinery and 2 Nos. Sluice Valve (@1000/-Each)

BALJIT KUMAR CONTRACTOR