AME of Electrical Section of Narayanpur Camp (Reserved for CAT-II(A))

AME of Electrical Section of Narayanpur Camp (Reserved for CAT-II(A))

10 SWG GI Wire (3.251 mm Dia), Std Wt: 82 Kg/KM complete as per direction of Engineer in charge.

LT Single Phase 5-30 Amps, DLMS Complaint Static Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations) complete as per direction of Engineer in charge.

1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 PVC Wire - 6 Sqmm Weight per 100 Mtr Coil: 3.5 Kg complete as per direction of Engineer ...

PVC Insulation Tapes 19 mm wide and in rolls of 10 Mtr complete as per direction of Engineer in charge.

Supplying PVC flexible conduit pipe .20...mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using ...

Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia .......mmthick

confirming to IS 2509 with suitable size bends, junction boxes, adhesive pasteetc , and fixing using inverted w...

Supplying and flush mounting teak wooden box without front plank, made of not less than12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.12" x 12" x 3" (30...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 16 A complete as per direction of Engineer in charge.

Supplying &fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicatorON/OFF, energy cross-3 with Short circuit breaking capaci...

Meter Protection/Tamper Proof Box (MS) for LT Installations 25 HP and above SMC Single Phase Meter protection box complete as per direction of Engineer in charge.

Pipe a)GI iv) 50 mm dia B class complete as per direction of Engineer in charge.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch complete as per direction of Engineer in charge.

11kv HT Metering Cubicle of Different CT Ration,Both side cable entry type with 3CT &3PT,With Transparent cover TTB,with 30X8mm copper busbar,modem &2 No of meters for 3phase 4 wire metering without l...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete...

Supply of LED Street light luminaire with pressure diecast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

b)LED 90W street light at Narayanpur Camp complete as per direction of Engineer in charge.

Supplying & fixing of retro fittype-LED bulb......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K ,CRI 70%. efficacy 80lumenper W, life 25000 burning hours and Compliance ...

RCC Pole - 9 Mtr Long, 150 Kg WL Sq Section (Dwg No. BESCOM/GM/QS&S/51 Dtd 24.11.2018) as per IS-785complete as per direction of Engineer in charge.

Cross Arms (MS & GI) as per IS-1977 11 kV, Horizontal Cross Arm - Galvanised Iron (GI) complete as per direction of Engineer in charge.

Clamps A Type (MS & GI) as per IS-1977 RCC Pole Clamp - GI complete as per direction of Engineer in charge.

11 kV GI Pin for 11 kV Ceramic Shell Insulator 11 kV GI Pin for 11 kV Ceramic Shell Insulator complete as per direction of Engineer in charge.

ACSR Conductor as per IS-398 (Part -2 /1996) Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM complete as per direction of Engineer in charge.

7/10 SWG Guy Wire(7/3.251 mm Dia), Std Wt: 680 Kg/KM complete as per direction of Engineer in charge.

Digging of Pit:Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.complete as per direction of Engineer in charge.

Erection of Poles: Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth complete as per direction of Engineer in charge.

Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc.,Fixing of 4 Pin cross arm with Insulator and Braces fixing complete as per direction of Engineer in cha...