Replacement of 2 Nos. 50 Cs, 1 No. 12 Cs AFVT Pump, 03 No. 600 HP, 2 No. 200 HP HT Motor, 1 No. 30 HP LT Motor at Pump House JC-1

Amount

Replacement of 50 Cs existing V.T. axial flow pump having lift 19.32’ including MS Delivery pipe, bend & support of bend as per site requirement & specification approved by technical committee (Annexure-A) Make- Kirloskar, Wilo, Flowmore, WPIL & Sintech (Upto 60 Cs Only).

Replacement of 12 Cs existing V.T. axial flow pump having lift 19.32’ including MS Delivery pipe, bend & support of bend as per site requirement & specification approved by technical committee (Annexure-A) Make- Kirloskar, Wilo, Flowmore, WPIL & Sintech (Upto 60 Cs Only).

Supply, Erection and commissioning of induction motors of 200 HP HT suitable for 50 Cs VT axial flow pumps, 150 KW, 735 RPM, 3.3 KV voltage, 3 phase, 50 Hz bearing SKF / FAG as per specifications (Annexure-B) and site requirements. Make-(MV Motor - Marathon, ABB, Kirloskar Electric, Siemans, Crompton, Jyoti, BHEL, Bharat Bijli, Jeumont. LV Motor- Marathon, ABB, Kirloskar Electric, Siemans, Crompton, Jyoti, BCH, Bharat Bijli)

Supply, Erection and commissioning of induction motor of 30 HP LT suitable for 12 Cs VT axial flow pumps, 22.5 KW, 415 voltage, 3 phase, 50 Hz bearing SKF / FAG as per specifications (Annexure-B) and site requirements. Make-(MV Motor - Marathon, ABB, Kirloskar Electric, Siemans, Crompton, Jyoti, BHEL, Bharat Bijli, Jeumont. LV Motor- Marathon, ABB, Kirloskar Electric, Siemans, Crompton, Jyoti, BCH, Bharat Bijli)

Supply, Erection and commissioning of induction motors of 600 HP HT suitable for 150 Cs VT axial flow pumps, 450 KW, 495 RPM, 3.3 KV voltage, 3 phase, 50 Hz bearing SKF / FAG as per specifications (Annexure-B) and site requirements. Make-(MV Motor - Marathon, ABB, Kirloskar Electric, Siemans, Crompton, Jyoti, BHEL, Bharat Bijli, Jeumont. LV Motor- Marathon, ABB, Kirloskar Electric, Siemans, Crompton, Jyoti, BCH, Bharat Bijli)

Terms & Conditions:- 1. The tender rate will be inclusive all taxes as applicable including GST. 2. The tender rate will be for F.O.R. destination and inclusive of all incidental charges, enroute & at destination. Nothing extra shall be paid separately. 3. WWC@1% will be deducted from the each bill of the agency. 4. The rate should be inclusive carriage, fitting and allied parts complete in all respect with left over items (if any) as per site requirement. 5. Goods which to be used / supplied should be as per sample and conforming to the site condition & also conforming to I.S. Specification. 6. Department will not be responsible for non submission of BOQ / Bid Document online by due date, due to any fault of internet/ E-tendering. 7. Third Party Testing by T.P.I.A. will be carried out in the presence of departmental representative at the manufacturer premises and cost of the same will be borne by the successful agency. 8. Old scrap will be property of the department, if any. 9. Completion period – completion period is 7 Months. 10. Agreement for maintenance / service of the work will be drawn with L-1 Agency on the terms and conditions given in SLA issued by C.E./LCU, I&WR Department Haryana Panchkula letter No. 1089-91/NABARD/2020 dated 16.09.2020 (copy attached). Agreement shall be for five years or 10000:00 Hrs. of working of electro mechanic equipments from the date of commencement of the agreement. 11. Payment schedule, as per bidding documents. 12. Payment shall be made on finished goods and not on casting only. 13. The material will be supplied as per drawing and newly approved technical specifications laid down in tender documents & subsequent submission by bidder in this regard. 14. Successful agency will submit drawing of the work within week period from the date of approval of rate by competent authority. 15. HT bolt to be used instead of SS bolt. 16. Performance test of pumps 50 % of quantity of pumps irrespective of cubic capacity. 17. Delivery pipe will be inserted in existing pipes and shall be less by 2inch dia and also as per site requirement. 18. Authorization from OEM be attached if tenderer is not a manufacturer. 19. Only OEM panel and starter will be accepted and not system integration. 20. Each page of bid book will be signed by the tenderer as a token of acceptance of terms and conditions. 21. Bidders may visit to the sites before quoting the tender rates. 9. Completion period – completion period is 1 month.

M/s KRP Engineering Pvt. Ltd.

ace marketing pvt ltd