Civil repair and construction jobs in BSL schools to be run by DAVCMC, Bokaro Steel city, Jharkhand

SI.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

Sub-Head : Civil Works

Brick work with common burnt clay F.P.S. (non modular)

6.1 bricks of class designation 7.5 in foundation and plinth

1 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 20.00 7370.65 1,47,413.00

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by

the manufacturer), of approvedmake, in all colours,

shades except burgundy, bottle green, black of any size

as approved by Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of cement

mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade

Designing, fabricating, testing, installing and fixing in

position Curtain Wall with Aluminium Composite Panel

3 8.32 Cladding, with open grooves for linear as well as Sqm 94.50 5015.05 4,73,922.00

curvilinear portions of the building , for all heights and

all levels etc. including:

Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed

9.1 and fixed in position with hold fast lugs or with dash

fasteners of required dia & length (hold fast lugs or dash

fastener shall be paid for separately).

Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type,

core of block board construction with frame of 1st class

hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face

veneers on both faces of shutters:

30 mm thick including ISI marked Stainless Steel butt

hinges with necessary screws

25 mm thick (for cupboard) including ISI marked nickel

6 9.21.3 plated bright finished M.S. piano hinges with necessary Sqm 337.00 2093.70 7,05,577.00

Providing and fixing ISI marked IS:1341 M.S. pressed

9.55 butt hinges bright finished with necessary screws etc.

Providing and fixing oxidised M.S. hasp and staple

9.67 (safety type) conforming to IS : 363 with necessary

screws etc. complete (Copper oxidised as per IS 1378)

Providing and fixing oxidised M.S. casement stays

9.68 (straight peg type) with necessary screws etc. complete

(Copper oxidised as per IS 1378)

10 9.68.1 300 mm weighing not less than 330 grams No 290.00 67.40 19,546.00

Providing and fixing aluminium sliding door bolts ISI

marked anodised (anodic coating not less than grade AC

10 as per IS : 1868) transparent or dyed to required

colour or shade with nuts and screws etc. complete :

Digitally signed by PRIYA

SI.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

Providing and fixing aluminium tower bolts ISI marked

anodised (anodic coating not less than grade AC 10 as

per IS : 1868 ) transparent or dyed to required colour or

shade with necessary screws etc. complete :

Providing and fixing aluminium handles of approved

make anodized (anodic coating not less than grade AC

10 as per IS : 1868) transparent or dyed to required

colour or shade with necessry screws etc. complete.

Providing and fixing factory made ISI marked steel

glazed doors, windows and ventilators, side /top /centre

hung, with beading and all members such as F7D,F4B,

K11 B and K12 B etc. complete of standard rolled steel

sections, joints mitred and flash butt welded and sash

bars tenoned and riveted, including providing and fixing

Fixing with carbon steel galvanised dash fastener of

required dia and size (to be paid for separately)

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc., including

cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer, including

welding and bolted with special shaped washers etc.

16 10.16.1 Hot finished welded type tubes. kg 600.00 194.40 1,16,640.00

Steel work welded in built up sections/ framed work,

including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer using

structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works.

Providing and fixing carbon steel galvanised ( minimum

coating 5 micron) dash fastener of 10 mm dia double

threaded 6.8 grade (yield strength 480 N/mm2), counter

10.27 sunk head, comprising of 10 mm dia polyamide PA 6

grade sleeve, including drilling of hole in frame ,

concrete/ masonry, etc. as per direction of Engineer-in-

Providing & fixing glass panes with putty and glazing

18 10.30.1 clips in steel doors, windows, clerestory windows all sqm 253.20 1064.65 2,69,569.00

complete with : 4.0 mm thick glass panes.

Providing and fixing T-iron frames for doors, windows

and ventilators of mild steel Tee-sections, joints mitred

10.31 and welded, including fixing of necessary butt hinges

and screws and applying a priming coat of approved

Fixing with 15x3 mm lugs 10 cm long embedded in

cement concrete block 15x10x10 cm of C.C. 1:3:6 (1

Cement : 3 coarse sand : 6 graded stone aggregate 20

mm nominal size).

Welding by gas or electric plant including transportation

of plant at site etc. complete.

Digitally signed by PRIYA

SI.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

With ready mixed red oxide zinc chromate primer of

22 13.50.3 approved brand and manufacture on steel galvanised Sqm 414.00 67.40 27,904.00

iron/steel works

Painting with synthetic enamel paint of approved brand

23 13.62 and manufacture of required colour to give an even Sqm 414.00 226.25 93,668.00

Cement concrete flooring 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate) finished with a floating

coat of neat cement, including cement slurry, but

excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 402.00 545.00 2,19,090.00

Providing and laying rectified Glazed Ceramic floor tiles

of size 300x300 mm or more (thickness to be specified

by the manufacturer), of 1st quality conforming to IS :

15622, of approved make, in all colours, shades, except

24 11.40 White, Ivory, Grey, Fume Red Brown, laid on 20 mm Sqm 270.00 1439.40 3,88,638.00

thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand),

jointing with grey cement slurry @ 3.3kg/sqm including

pointing the joints with white cement and matching

pigments etc., complete.

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with

water absorption less than 0.08%and conforming to IS :

15622 , of approved make, in all colours and shades, laid

on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

sand) jointing with grey cement slurry @ 3.3kg/sqm

including grouting the joints with white cement and

matching pigments etc., complete.

Providing and fixing on wall face unplasticised Rigid PVC

rain water pipes conforming to IS : 13592 Type A,

26 12.41 including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion, (i) Single

socketed pipes.

(i)Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC

moulded fittings/accessories for unplasticised Rigid PVC

12.42 rain water pipes conforming to IS 13592 Type A,

including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

12.42.1 Coupler

12.42.2 Single pushfit Coupler :

12.42.3 Single tee with door

12.42.4 Single tee without door

12.42.6 Shoe (Plain)

Digitally signed by PRIYA

SI.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

Providing and fixing unplasticised -PVC pipe clips of

approved design to unplasticised - PVC rain water pipes

by means of 50x50x50 mm hard wood plugs, screwed

with M.S. screws of required length, including cutting

brick work and fixing in cement mortar 1:4 (1 cement : 4

coarse sand) and making good the wall etc. complete.

Providing and fixing precoated galvanised iron profile

sheets (size, shape and pitch of corrugation as approved

by Engineer-in-Charge) of total coated thickness 0.50

mm (base metal of minimum 0.45 mm thickness with

total coating thickness of 0.05mm) with zinc coating 120

grams per sqm as per IS: 277, in 240 mpa steel grade, 5-

34 12.50 7 microns epoxy primer on both side of the sheet and sqm 60.00 738.65 44,319.00

polyester top coat 15-18 microns. Sheet should have

protective guard film of 25 microns minimum to avoid

scratches during transportation and should be supplied

in single length upto 12 metre or as desired by Engineer-

in-charge. The sheet shall be fixed using self drilling /seIf

tapping screws of size (5.5x 55 mm) with EPDM seal,

12.54 Providing and fixing GI Clip in Metal Ceiling System of

600x600 mm module which includes providing and

fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm

thick pre painted steel along the perimeter of the room

with help of nylon sleeves and wooden screws at 300

mm center to centre, suspending the main C carrier of

size 10x38x10mm made of G.I steel 0.7 mm thick from

the soffit with help of soffit cleat 37x27x25x1.6 mm,

rawl plugs of size 38x12 mm and C carrier suspension

clip and main carrier bracket at 1000 mm c/c. Inverted

triangle shaped Spring Tee having height of 24 mm and

GI Metal Ceiling Clip in plain Beveled edge global white

color tiles of size 600x600 and 0.5mm thick with 25 mm

height, made of G I sheet having galvanizing of 100

gms/sqm (both sides inclusive) and 20% perforation

area with 1.8mm dia holes and having NRC of 0.5,

electro statically polyester powder coated of thickness

60 microns (minimum), including factory painted after

bending and perforation.

Total of the Sub-Head - Roofing :

Sub-Head : Finishing

13.1 12 mm cement plaster of mix :

15 mm cement plaster on rough side of single or half

brick wall of mix :

13.16 6 mm cement plaster of mix :

39 13.18 Neat cement punning sqm 500.00 79.95 39,975.00

Rough cast plaster upto 10 m height above ground level

with a mixture of sand and gravel or crushed stone from

6 mm to 10 mm nominal size, dashed over and including

the fresh plaster in two layers, under layer 12mm

cement plaster 1:4 (1 cement: 4 coarse sand) and top

layer 10 mm cement plaster 1:3 (1 cement: 3 fine sand)

mixed with 10% finely grounded hydrated lime by

volume of cement.

Digitally signed by PRIYA

SI.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

40 13.19.1 Ordinary cement finish using ordinary cement Sqm 510.00 886.60 4,52,166.00

Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :

41 13.61.1 Two or more coats on new work. Sqm 1050.00 155.90 1,63,695.00

Providing and applying white cement based putty of

average thickness 1 mm, of approved brand and

42 13.80 manufacturer, over the plastered wall surface to Sqm 1800.00 312.10 5,61,780.00

prepare the surface even and smooth complete. Two

Wall painting with premium acrylic emulsion paint of

interior grade, having VOC (Volatile Organic Compound

13.83 ) content less than 50 grams/ litre. of approved brand

and manufacture, including applying additional coats

wherever required to achieve even shade and colour.

Applying priming coats with primer of approved brand

13.85 and manufacture, having low VOC (Volatile Organic

Compound ) content.

With water thinnable cement primer on wall surface

having VOC content less than 50 grams/litre.

Removing white or colour wash by scrapping and sand

45 13.88 papering and preparing the surface smooth including Sqm 700.00 19.75 13,825.00

necessary repairs to scratches etc. complete

Repairs to plaster of thickness 12 mm to 20 mm in

patches of area 2.5 sq.meters and under, including

cutting the patch in proper shape, raking out joints and

14.1 preparing and plastering the surface of the walls

complete, including disposal of rubbish to the dumping

ground, all complete as per direction of Engineer-in-

46 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand). Sqm 600.00 547.40 3,28,440.00

Dismantling W.C. Pan of all sizes including disposal of

47 14.82 dismantled materials i/c malba all complete as per No. 8.00 134.10 1,073.00

directions of Engineer-in- Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking

of dismantled pipes (within 50 metres lead) as per

direction of Engineer in-Charge.

(a) Internal Work- Exposed on wall

Taking out existing wooden door shutter, repair by

cutting, painting etc. and refixing of repaired door

49 14.85 shutters to existing door frames, including replacement Each 215.00 429.10 92,257.00

of hinges with screws, etc. as required, all complete as

per the direction of the Engineer-in-charge

Demolishing R.C.C. work manually/ by mechanical

means including stacking of steel bars and disposal of

unserviceable material within 50 metres lead as per

direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal

of unserviceable material within 50 metres lead as per

direction of Engineer-in-charge..

Dismantling tile work in floors and roofs laid in cement

15.23 mortar including stacking material within 50 metres

Digitally signed by PRIYA

SI.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

52 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 120.00 73.40 8,808.00

Dismantling C.I. or asbestos rain water pipe with fittings

and clamps including stacking the material within 50

Dismantling G.I. pipes (external work) including

excavation and refilling trenches after taking out the

54 15.44.1 pipes, manually/ by mechanical means including meter 160.00 149.80 23,968.00

stacking of pipes within 50 metres lead as per direction

of Engineer-in-charge : 15 mm to 40 mm nominal bore

Dismantling of flushing cistern of all types

(C.I./PVC/Vitreous China) including stacking of useful

materials near the site and disposal of unserviceable

materials within 50 metres lead.

Disposal of building rubbish / malba / similar

unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting,

unloading to approved municipal dumping ground or as

approved by Engineer-in-charge, beyond 50 m initial

lead, for all leads including all lifts involved.

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extruded built

up standard tubular sections/appropriate Z sections and

other sections of approved make conforming to IS: 733

and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at

21.1.1 For fixed portion 0.00

Powder coated aluminium (minimum thickness of

powder coating 50 micron)

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

21.1.2 for fixing of fittings wherever required including the cost 0.00 -

of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately).

Powder coated aluminium (minimum thickness of

powder coating 50 micron)

Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber

/ neoprene gasket etc. complete as per the architectural

drawings and the directions of engineer-in-charge .

(Cost of aluminium snap beading shall be paid in basic

With float glass panes of 5 mm thickness (weight not

less than 12.50 kg/sqm)

Filling the gap in between aluminium frame & adjacent

RCC/ Brick/ Stone work by providing weather silicon

21.8 sealant over backer rod of approved quality as per 0.00 -

architectural drawings and direction of Engineer-in-

charge complete.

60 21.8.1 Upto 5mm depth and 5 mm width m 100.00 96.75 9,675.00

Chipping of unsound/weak concrete material from

slabs, beams, columns etc. with manual Chisel and/ or

by standard power driven percussion type or of

approved make including tapering of all edges, making

square shoulders of cavities including cleaning the

exposed concrete surface and reinforcement with wire

brushes etc. and disposal of debris for all lead and lifts

all complete as per direction of Engineer-In-Charge

Digitally signed by PRIYA

SI.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

62 26.28.2 50 mm average thickness sqm 150.00 256.35 38,453.00

Cleaning of reinforcement from rust from the

reinforcing bars to give it a total rust free steel surface

by using alkaline chemical rust remover of approved

26.29 make with paint brush and removing loose particles

after 24 hours of its application with wire brush and

thoroughly washing with water and allowing it to dry, all

complete as per direction of Engineer-In-Charge.

64 26.29.2 Bars above 12 mm diameter m 300.00 16.45 4,935.00

Providing, mixing and applying bonding coat of

approved adhesive on chipped portion of RCC as per

specifications and direction of Engineer-In-charge

complete in all respect.

SBR Polymer (@10% of cement weight) modified

cementitious bond coat @ 2.2 kg cement per sqm of

surface area mixed with specified proportion of

approved polymer

Total of the Sub-Head - Civil Work :

Sub-Head : Sanitary Installations

Providing and fixing water closet squatting pan (Indian

type W.C.pan ) with 100 mm sand cast Iron P or S trap,

10 litre low level white P.V.C. flushing cistern, including

17.1 flush pipe, with manually controlled device (handle

lever) conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making good

the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size

580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type

water closet (European type W.C. pan) with seat and lid,

10 litre low level white P.V.C. flushing cistern, including

17.2 flush pipe, with manually controlled device (handle

lever), conforming to IS : 7231, with all fittings

andfixtures complete, including cutting and making

good the walls and floors wherever required :

67 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Nos 14.00 6515.55 91,218.00

Providing and fixing wash basin with C.I. brackets, 15

mm C.P. brass pillar taps, 32 mm C.P. brass waste of

17.7 standard pattern, including painting of fittings and

brackets, cutting and making good the walls wherever

White Vitreous China Wash basin size 630x450 mm with

a single 15 mm C.P. brass pillar tap

White Vitreous China Surgeon type wash basin of size

69 17.7.9 660x460 mm with single 15 mm C.P. brass pillar taps Nos 12.00 2940.50 35,286.00

with elbow operated levers ISI Marked

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible

tube upto 1 metre long with S.S. triangular plate to

Eureopean type W.C. of quality and make as approved

by Engineer - in - charge.

Providing and fixing P.V.C. low level flushing cistern with

17.18 manually controlled device (handle lever) conforming to

IS : 7231, with all fittings and fixtures complete.

71 17.18.1 10 litre capacity - White Nos 6.00 1190.65 7,144.00

Digitally signed by PRIYA

SI.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

Providing and fixing solid plastic seat with lid for

pedestal type W.C. pan complete :

72 17.20.1 White solid plastic seat with lid Nos 8.00 684.85 5,479.00

Providing and fixing white vitreous china flat back or

wall corner type lipped front urinal basin of

430x260x350 mm or 340x410x265 mm sizes

Providing and fixing white vitreous china squatting plate

urinal with integral rim longitudinal flush pipe.

Providing and fixing white vitreous china wash basin

17.25 including making all connections but excluding the cost

75 17.25.1 Flat back wash basin of size 630x450 mm. Nos 12.00 1339.70 16,076.00

76 17.25.3 Angle back wash basin of size 600x480 mm. Nos 6.00 1339.70 8,038.00

Providing and fixing P.V.C. waste pipe for sink or wash

basin including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

Providing and fixing 100 mm sand cast Iron grating for

Providing and fixing 600x450 mm beveled edge mirror

of superior glass (of approved quality) complete with 6

mm thick hard board ground fixed to wooden cleats

with C.P. brass screws and washers complete.

Providing and fixing trap of self cleansing design with

screwed down or hinged grating with or without vent

80 17.60.2.1 arm complete, including cost of cutting and making Each 32.00 1975.15 63,205.00

good the walls and floors :100 mm inlet and 75 mm

outlet Sand Cast Iron S&S as per IS: 1729

Providing and fixing PTMT Waste Coupling for wash

basin and sink, of approved quality and colour.

Waste coupling 31 mm dia of 79 mm length and 62 mm

breadth weighing not less than 45 gms.

Providing and fixing PTMT Bottle Trap for Wash basin

Bottle trap 31mm single piece moulded with height of

270 mm, effective length of tail pipe 260 mm from the

82 17.70.1 centre of the waste coupling, 77 mm breadth with 25 each 16.00 367.10 5,874.00

mm minimum water seal, weighing not less than 260

Providing and fixing PTMT liquid soap container 109 mm

wide, 125 mm high and 112 mm distance from wall of

83 17.71 standard shape with bracket of the same materials with Nos 12.00 168.35 2,020.00

snap fittings of approved quality and colour, weighing

not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape

215 mm long, 200 mm wide with minimum distances of

84 17.72 37 mm from wall face with concealed fittings Nos 12.00 231.95 2,783.00

arrangement of approved quality and colour, weighing

not less than 88 gms.

Providing and fixing PTMT towel rail complete with

brackets fixed to wooden cleats with CP brass screws

with concealed fittings arrangement of approved quality

Digitally signed by PRIYA

SI.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

450 mm long towel rail with total length of 495 mm, 78

85 17.73.1 mm wide and effective height of 88 mm, weighing not Nos 15.00 673.40 10,101.00

less than 170 gms.

Providing and fixing C.P. brass angle valve for basin

86 18.53 mixer and geyser points of approved quality conforming Each 168.00 574.30 96,482.00

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass threaded

fittings, including fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and testing of joints

complete as per direction of Engineer in Charge. :

Internal work - Exposed on wall

87 18.7.2 20 mm nominal outer dia. Pipes. m 955.00 335.00 3,19,925.00

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass threaded

fittings, i/c fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and the cost of cutting

chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

:Concealed work, including cutting chases and making

good the walls etc.

88 18.8.2 20 mm nominal outer dia .Pipes. m 800.00 537.60 4,30,080.00

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot & cold

water supply including all CPVC plain & brass threaded

18.9 fittings. This includes jointing of pipes & fittings with

one step CPVC solvent cement, trenching, refilling &

testing of joints complete as per direction of Engineer in

Charge : External work

89 18.9.4 32 mm nominal outer dia. Pipes. m 240.00 438.60 1,05,264.00

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701 marked,

18.48 with cover and suitable locking arrangement and ltr 10000.00 9.70 97,000.00

making necessary holes for inlet, outlet and overflow

pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved

quality conforming to IS:8931:

Providing and fixing C.P. brass stop cock (concealed) of

18.52 standard design and of approved make conforming to

Providing and fixing C.P. brass angle valve for basin

18.53 mixer and geyser points of approved quality conforming

Providing and fixing C.P. Brass extension nipple (size

93 18.53A 15mmx50mm) of approved make and quality as per No. 64.00 74.80 4,787.00

direction of Engineer-in-charge.

Providing and fixing PTMT pillar cock of approved

quality and colour .

15mm nominal bore, 125 mm long foam flow. Weighing

not less than 120 gms.

Digitally signed by PRIYA

SI.No. Description of Item Unit Quantity Rate (Rs) Amount(Rs)

Providing and fixing unplasticised P.V.C. connection pipe

18.74 with PTMT Nuts, collar and bush of approved quality

95 18.74.2 15 mm nominal bore with 45 cm length. No. 36.00 121.90 4,388.00

Making chases up to 7.5x7.5 cm in walls including

96 18.78 making good and finishing with matching surface after m 353.00 202.90 71,624.00

housing G.I. pipe etc.

Dismantling old C.I. pipes including excavation and

refilling trenches after taking out the pipes, breaking

lead caulked joints, melting of lead and making into

blocks including stacking of pipes at site lead upto 50

100 mm diameter C.I. pipe

Total of the Sub-Head - Plumbing works

Non Schecule Works

Replacement of G.I fittings like elbow, short piece T,

reducer, bend and chek nut etc. of any dia. by removing

the old one without damaging of other fittings and

fixtures at any height of the building including returning

the removed materials to the Main Post or as per

direction of EIC.

Supply, installation , testing commissioning of PP

Mineral filled low noise Soil & Waste system as

per EN 12056, with density 1.9 g/cm3. PP

mineral(Astolan) filled Low noise system should has

a fire classification DIN 4102-B2/EN13501 . Product

should have a chemical resistance of pH 2-12 and is

a complete sound protection system according to DIN

4109. including with push fit rubber ring sockets all

necessary fittings and specials such as Bends,

junctions, offsets & vent cowl. Fixing at wall/ceiling

level supported by rubber line bracket & hangers etc.

duly epoxy coated. Cutting, chases/holes in floors /

walls / slab.Compliant with LABC. Weight mass per

unit area of DN100MM should not be less than

110.07kg/m3. sound levels of not more than 15dBA

as per EN 14366 at a flow rate of 4 l/s.including all

core cut ,chases ,cutting making holes in all wall and

floor as required complete in all respect.

Providing Fixing straight /offset type single body push fit type

WC pan connector with factory supplied spring

loaded seal guard with integral single mould sealing

fins made of flexible EVA body, including

bush/adaptor as supplied with the pan connector (if

Removal and cleaning one or more vegetation/plants

from wall roofs,chajja etc upto 4sqm area ,chemically

treatment of surface to prevent further growth

andmaking good the surface by plaster

,grounting,waterproofing,etc as the case may be

including necessary scaffolding staging etc.

Digitally signed by PRIYA